Vivo PP-DK30B-1 Manuel utilisateur

Black Clamp-on Pegboard Panel

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/pp-dk12b

SKU: PP-DK30B-1

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual

and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect

assembly, or inappropriate use.

WARNING!

TOOLS NEEDED

Phillips

Screwdriver

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

A (x2)

Support B (x1)

Pegboard

C (x2)

Shelf

S-A (x6)

M6x16mm

Screw

S-B (x6)

M6 Washer

T-A (x1)

4mm Allen Wrench

E (x8)

Zip Tie

I (x8)

Magnet

H (x2)

Hook

J (x2)

Clip

D (x2)

Clamp Pad

F (x4)

Shelf Bracket

G (x2)

Loop

Option B:

Below Desk

Cable Management

Page 9

Option A:

Above Desk Mounting

Page 4

ASSEMBLY OPTIONS:

ASSEMBLY OPTION A: Above Desk Mounting

Pre-Assembly

0 - 2" / 0 - 51mm Desktop Thickness: No pre-assembly required. Proceed to STEP 1.

1.1 - 3" / 28 - 77mm Desktop Thick: Follow steps below.

1. Use a Phillips screwdriver to

remove screws separate Lower

Clamp (A1) from Support (A).

2. Remove the center screw to

disassmble Lower Clamp using

a Phillips screwdriver. Flip

Clamp Plate (A2) as shown and

reassemble Lower Clamp.

3. Reconnect Lower Clamp (A1)

to Support (A) using a Phillips

screwdriver.

STEP 1

Connect Pegboard (B) to Supports (A) by installing M6x16mm Screws (S-A) and M6 Washer (S-B)

through pegboard into threaded holes of Supports (A) using 4mm Allen Wrench (T-A). This can be done

in a portrait or landscape orientation. See examples below.

Orientation Options

Portrait Landscape

S-B S-A

T-A

STEP 2

Install Clamp Pads (D) on the Clamps (A1) on Supports (A). Tighten Clamps (A1) to attach to desired

surface. Use Zip Ties (E) to secure cables along Supports (A).

STEP 3

Install accessories (C, F thru J) onto assembled pegboard. See images on next page for placement.

Shelf (C,F)

Magnets

Hooks (H)

Place Shelf Brackets (F)

onto desired location on

pegboard. Place Shelf (C)

onto Shelf Brackets (F).

Clips (J) and Magnets (I) can be

used as desired on pegboard.

Place Hooks (H) into

desried pegboard holes.

Loops (G)

Place Loops (G) into

desired pegboard holes.

Accessory Placement

STEP 1

To mount belowdesktop, the Clamp on Supports (A) will first need to be removed. The Clamp will be

re-installed to the pegboard and used to secure pegboard below desktop.

DISASSEMBLE SUPPORTS (A):

Remove M6x6mm Screws (A2) and M6x8mm Screws (A3) from Clamp (A1) to remove Clamp Bolt (A4)

using 4mm Allen Wrench (T-A).

Next, remove M6x16mm Screws (A5) from underside of Supports (A) using 4mm Allen Wrench (T-A) to

separate Clamp (A1).

T-A

ASSEMBLY OPTION B: Below Desk Cable Management

STEP 2

Connect Clamp Bolt (A4) to Clamp (A1) using previously removed M6x8mm Screws (A3) and

4mm Allen Wrench (T-A).

Connect Pegboard (B) to front of Clamps (A1) using previously removed M6x6mm Screws (A2).

T-A

BA1

Autres manuels pour PP-DK30B-1

Table des matières

Autres manuels Vivo Support et étagère

Vivo

Vivo STAND-V002P Manuel utilisateur

Vivo

Vivo MOUNT-JS1 Manuel utilisateur

Vivo

Vivo STAND-V001E Manuel utilisateur

Vivo

Vivo MOUNT-VW01A Manuel utilisateur

Vivo

Vivo MOUNT-VW11 Manuel utilisateur

Vivo

Vivo MOUNT-SG04 Manuel utilisateur

Vivo

Vivo MOUNT KB05D Manuel utilisateur

Vivo

Vivo MOUNT-PC01 Manuel utilisateur

Vivo

Vivo MOUNT-PC03V Manuel utilisateur

Vivo

Vivo STAND-V000U Manuel utilisateur

Vivo

Vivo STAND-V002C Manuel utilisateur

Vivo

Vivo STAND-V101Y Manuel utilisateur

Vivo

Vivo MOUNT-PC06E Manuel utilisateur

Vivo

Vivo MOUNT-PLAY1B Manuel utilisateur

Vivo

Vivo MOUNT-VW100F VW100F Manuel utilisateur

Vivo

Vivo STAND-TV75R Manuel utilisateur

Vivo

Vivo STAND-V103F Manuel utilisateur

Vivo

Vivo DESK-AC36MH Manuel utilisateur

Vivo

Vivo STAND-TV01L Manuel utilisateur

Vivo

Vivo MOUNT-ASMX01 Manuel utilisateur

Vivo

Vivo MOUNT-KB03B Manuel utilisateur

Vivo

Vivo DESK-V000S Manuel utilisateur

Vivo

Vivo STAND-V011H Manuel utilisateur

Vivo

Vivo DESK-WB01S Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur