Vivo Mount-E-FD55 Manuel utilisateur

Remote Control Motorized TV

Ceiling Mount

Instruction Manual

Email: [email protected]

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

- -Model: MOUNT E FD55

Tools Required:

electric drill, phillips screwdriver

Scan the QR code with your mobile device or follow the

link to helpful videos and specifications related to this

product.

- - -https://vivo us com/products/mount e fd55

Caution!

1. Make sure the supporting surface will safely support the combined weight of the

equipment and all attached hardware and components.

2. Tighten screws firmly, but do not over tighten, which causes damage to the product and

reduces its holding power.

3. Please do not disassemble or change the electronic components of the product without

authorization.

Package Contents

Assembly Steps

Step 1: Hang Ceiling Mount

Using ceiling template (C), mark

exact location of mounting holes.

Drill pilot holes 2.2” deep, using a

4. mm drill bit. Insert two screws

(W-A), leaving a mm gap from

ceiling.

Option A: For Wooden Ceilings

Option B: For Concrete Ceilings

Using ceiling template (C), mark

exact location of mounting holes.

Drill pilot holes 2.4” deep, using a

10mm drill bit. Insert six concrete

anchors (W-B), then tighten two

screws (W-A), leaving a mm gap

from ceiling.

Hang the ceiling mount so that the

screws fit into the keyhole

openings. Slide mount forward,

then secure using additional

screws (W-A) with washers (W-C).

Tighten all screws.

Hang the ceiling mount so that the

screws fit into the keyhole

openings. Slide mount forward,

then secure using additional

screws (W-A) with washers (W-C).

Tighten all screws.

Step 2: Installing the VESA Plate

Remove the two bottom screws from

the VESA plate (B) and set aside for

later use.

Remove the screws from the VESA

adapters (E, F).

(if mounting a TV with a VESA pattern larger than 200 x 200mm)

Align the VESA adapters with the

VESA plate and assemble, using

screws previously removed from the

VESA adapters.

OPTIONAL

Step 2: (Continued)

Align the VESA plate with the mounting holes in the back of the TV screen. Install

VESA plate to TV using appropriate screws and washers according to your screen

type.

Option A: For Flat Back Screens

Option B: For Recessed Back Screens or to Access A/V Inputs

Align the VESA plate with the mounting holes in the back of the TV screen. Install

VESA plate to TV using appropriate screws and washers according to your screen

type.

Step 3: Hooking the TV onto the Ceiling Mount

Insert upper center screw on VESA plate into keyhole hook.

Using screws previously removed (in beginning of step 2), fasten VESA plate

to ceiling mount.

Clearance between the ceiling and top edge of TV should be no less than

1 mm when TV is in the fully lowered position.

Using cable ties (J), fasten cables.

Step 4: Run Cables and Install Covers

Run cables along edge of mount.

Allow slack in cables for arm

movement. Place covers over

cables and snap into place.

Step 5: Installing the IR Receiver

Note: Plugging power supply into AC outlet prior to the mount may cause a

large spark when connecting to the mount.

Don’t run any cables through the mount motion space.

NOTE:

Peel the backing paper. Place IR receiver (G) on TV as desired. Ensure

nothing will obstruct the transmission from where the TV will be viewed.

Plug IR receiver (G) into mount. Plug power supply (I) into mount, and

connect to AC outlet.

Safety Warning

If you do not understand these directions, or if you have any

doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no

missing or defective parts. Improper installation may cause

damage or serious injury. Do not use this product for any

purpose that is not explicitly specified in this manual. We

cannot be liable for damage or injury caused by improper

mounting, incorrect assembly, or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact

us. We are happy to replace parts to ensure you have a fully

functioning product.

Last Updated: 04/26/2018 4

Autres manuels pour Mount-E-FD55

Autres manuels Vivo Support et étagère

Vivo

Vivo DESK-EXT24/W Manuel utilisateur

Vivo

Vivo STAND-V003Y Manuel utilisateur

Vivo

Vivo MOUNT-M-FD27 Manuel utilisateur

Vivo

Vivo STAND-E-149 Manuel utilisateur

Vivo

Vivo MOUNT KB04C Manuel utilisateur

Vivo

Vivo STAND-HS03B Manuel utilisateur

Vivo

Vivo STAND-HS02W Manuel utilisateur

Vivo

Vivo STAND-TV03E Manuel utilisateur

Vivo

Vivo STAND-GM1BB Manuel utilisateur

Vivo

Vivo MOUNT-PC06E Manuel utilisateur

Vivo

Vivo STAND-V001C Manuel utilisateur

Vivo

Vivo DESK-V000K-M1 Manuel utilisateur

Vivo

Vivo MOUNT-GM01C Manuel utilisateur

Vivo

Vivo STAND-V001E Manuel utilisateur

Vivo

Vivo STAND V003M Manuel utilisateur

Vivo

Vivo STAND-V012F Manuel utilisateur

Vivo

Vivo MOUNT-VW100F VW100F Manuel utilisateur

Vivo

Vivo STAND-V106A Manuel utilisateur

Vivo

Vivo STAND-V104A Manuel utilisateur

Vivo

Vivo STAND-TV55S Manuel utilisateur

Vivo

Vivo MOUNT-KB03 Manuel utilisateur

Vivo

Vivo STAND-V100H/W Manuel utilisateur

Vivo

Vivo PP-2-G060C Manuel utilisateur

Vivo

Vivo STAND-V004P Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur