Vivo MOUNT-CUB2D Manuel utilisateur

Cubicle Monitor Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-cub2d

SKU: MOUNT-CUB2D

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MOUNT OR

MONITOR

• USE TIPOVER RESTRAINT

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

A (x1)

Main Plate

B(x1)

Clamp Plate

C(x1)

VESA Support

Plate

P(x1)

M8x20

J (x4)

M4x30

L (x1)

Oval Pate

D(x1)

VESA Plate

E(x4)

M6x22 Bolt

F (x4)

M6 Washer

G(x4)

M4/M6 Spacer

H (x1)

Allen Key

I (x4)

M4x12

Q(x1)

Plastic Knob

M (x1)

M4x12

K (x1)

Clamp Knob

O (x2)

M8x12

N (x1)

M4 Washer

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS - OPTION A: DESK MOUNT

STEP 1

TOOLS NEEDED

22lbs

(9.98kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Phillips

Screwdriver

STEP 2

Screw the Clamp Knob (K) into the Clamp Plate

(B). For a desk thickness of 1/2” to 2”, the plastic

handle is on the same side as the mounting lip

on the plate, and for a desk thickness of 1-1/2” to

3”, the plastic handle is on the opposite side from

the lip (please note, maximum monitor height is

aected by desk thickness). Assemble the Oval

Plate (L) to the Clamp Knob using the M4x12 Bolt

(M) and M4 Washer (N).

Mount the assembled clamp to the Main Plate (A)

using the M8x12 Bolts (O), and tighten with the

5mm Allen Key (H).

ÅÇ

STEP 3

Tighten the Main Plate with clamp to the desk. Do

not overtighten, as this may cause the stand to lean

back.

STEP 4

Mount the VESA Support Plate (C) to the Main Plate at the desired height using M6x22 Bolts (E) and

M6 Washers (F), and tighten with the 4mm Allen Key (H). If the monitor will be removed frequently or

the back of the stand must be flush, use M4/M6 Spacers (G) between the VESA Support Plate and Main

Plate. Please note, the lever must be facing down.

STEP 5

OPTION A: Flat Back Monitor

For monitors with a flat back, mount the VESA

Plate (D) using M4x12 Bolts (I).

OPTION B: Curved Back Monitor

For monitors with a curved or recessed back,

mount the VESA Plate (D) using M4x30 Bolts (J)

and M4/M6 Spacers (G).

STEP 6

Mount the VESA Support Plate (C) to the Main Plate at the desired height using M6x22 Bolts (E) and

M6 Washers (F), and tighten with the 4mm Allen Key (H). If the monitor will be removed frequently or

the back of the stand must be flush, use M4/M6 Spacers (G) between the VESA Support Plate and Main

Plate. Please note, the lever must be facing down.

STEP 7

To remove the monitor, pull the release lever on the VESA Support Plate forward and li the monitor.

STEP 1

OPTION A

For a cubicle wall thickness of up to 1-3/8”, install the Clamp Plate (B) to the Main Plate (A) with the

long side facing in. Secure with the M8x20 Bolt (P) and Plastic Knob (Q), but do not tighten. Hang

the Main Plate with Clamp Plate over the cubicle wall. Move the plates together against the wall and

tighten the Plastic Knob.

ASSEMBLY STEPS - OPTION B: CUBICLE MOUNT

OPTION B

For a cubicle wall thickness of 1” to 2.4”, install the Clamp Plate (B) to the Main Plate (A) with the long

side facing out. Secure with the M8x20 Bolt (P) and Plastic Knob (Q), but do not tighten. Hang the Main

Plate with Clamp Plate over the cubicle wall. Move the plates together against the wall and tighten the

Plastic Knob.

switch

STEP 2

Mount the VESA Support Plate (C) to the Main Plate at the desired height using M6x22 Bolts (E) and

M6 Washers (F), and tighten with the 4mm Allen Key (H). If the monitor will be removed frequently or

the back of the stand must be flush, use M4/M6 Spacers (G) between the VESA Support Plate and Main

Plate. Please note, the lever must be facing down.

STEP 3

OPTION A: Flat Back Monitor

For monitors with a flat back, mount the VESA

Plate (D) using M4x12 Bolts (I).

OPTION B: Curved Back Monitor

For monitors with a curved or recessed back,

mount the VESA Plate (D) using M4x30 Bolts (J)

and M4/M6 Spacers (G).

STEP 4

Slide monitor with VESA Plate onto the VESA Support Plate. There will be a “click” when the monitor

is fully seated and locked.

STEP 5

To remove the monitor, pull the release lever on the VESA Support Plate forward and li the monitor.

switch

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table des matières

Autres manuels Vivo Support et étagère

Vivo

Vivo MOUNT-VP06W Manuel utilisateur

Vivo

Vivo MOUNT-M-FD37 Manuel utilisateur

Vivo

Vivo STAND-V102BDU Manuel utilisateur

Vivo

Vivo STAND-V002O Manuel utilisateur

Vivo

Vivo DESK-V133E Manuel utilisateur

Vivo

Vivo STAND-V003 Manuel utilisateur

Vivo

Vivo MOUNT-UVM02 Manuel utilisateur

Vivo

Vivo STAND-TV00T Manuel utilisateur

Vivo

Vivo STAND-V001E Manuel utilisateur

Vivo

Vivo STAND-V200G Manuel utilisateur

Vivo

Vivo Sonos Play 5 Manuel utilisateur

Vivo

Vivo STAND-V011/W Manuel utilisateur

Vivo

Vivo DESK-AC06-2B Manuel utilisateur

Vivo

Vivo STAND-V101SV Manuel utilisateur

Vivo

Vivo STAND-V002F Manuel utilisateur

Vivo

Vivo STAND-V101N Manuel utilisateur

Vivo

Vivo STAND-V100G Manuel utilisateur

Vivo

Vivo Easel Studio STAND-TV70C Manuel utilisateur

Vivo

Vivo STAND-V006 Manuel utilisateur

Vivo

Vivo STAND-TV70B Manuel utilisateur

Vivo

Vivo STAND-V002 Manuel utilisateur

Vivo

Vivo MOUNT-PL1A-LAP3 Manuel utilisateur

Vivo

Vivo MOUNT-VP02B Manuel utilisateur

Vivo

Vivo STAND-V001T Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur