Vitek VTC-C680 Manuel utilisateur

BLACK

VITEK

VTC-C680

VTC-C750

VTC-C680/DN

VTC-C750/DN

1/3” Color Camera Series

•1/3" Super HAD CCD With 550 TVL (VTC-C750 / VTC-

C750DN) & 480 TVL (VTC-C680 / VTC-C680DN)

•Minimum Illumination 0.02 Lux (F1.2) (VTC-C680DN / VTC-

C750DN) & 0.2 Lux (F1.2) (VTC-C680 / VTC-C750)

•Accepts DC Servo Type Auto Iris Lenses

•2000-8000 Degree K Automatic White Balance Tracking

•Max 1/100,000 Sec. Electronic Shutter

•Better Than 48dB S/N Ratio (VTC-C680 / VTC-C750) &

50dB (VTC-C680DN / VTC-C750DN)

•12VDC / 24VAC Dual Voltage Operation

1. Unit contains uninsulated dangerous

voltage within the enclosure that may

be of sufficient magnitude to

constitute a risk of electric shock to

persons

2. Only use DC Power Supply

3. Read & Keep these instructions.

4. Heed to all warnings and follow all

instructions carefully.

5. Do not use near water.

6. Clean only with dry cloth.

7. Do not block any ventilation

openings. install in accordance with

the instructions.

8. Do not install near any heat source

such as radiators, heat resisters,

stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has to blades with

one wider the other. A grounding type

plug has to blades and a third

grounding plug. The wide blade or

the third prong are provided for

safety. if the provided plug dose not

fit into your into your outlet, consult

an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being

walked on a pinched particularly at

plugs, convenience receptacle, and

the point where they exit from the

apparatus.

11. Only use attachment/accessories

specified by VITEK.

12. Use only with cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the Unit,

13. Unplug this unit during lightning

storms or when unused for long

periods of time.

14. Refer all servicing to qualified service

personnel, Servicing is required

when the unit has been damaged in

any way, such as power-supply cord

or plug is damaged, liquid has been

spilled or objects have fallen into the

unit, the unit has been exposed to

rain or moisture, does not operate

normally or has been dropped.

15. Do not attempt to service this

product yourself as opening or

removing covers may expose you to

dangerous voltage or other hazards.

Refer all servicing to qualified service

personal.

CAUTION - To reduce the risk of electric

shock, do not perform any servicing

other than contained in these operating

instructions unless you are qualified to

do so.

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

BBLLAACCKK

CONTENTS

SAFETY INSTRUCTIONS & NOTES

Safety Instructions & Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Introduction / Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Camera Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Rear Camera Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

External Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9

Power Supply Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

•Please read these safety and operating instructions before putting the camera into

operation.

•Keep the operating instructions in a safe place for later use.

•The Standard Box Camera is designed for indoor use only and it must not be installed

where exposed to rain and moisture.

•The unit may only be opened by authorized personnel.

•Do not operate the cameras beyond their specified temperature, humidity or power

ratings.

•Pay attention when laying the connection cable and observe that the cable is not

subject to heavy loads, kinks, or damage and no moisture can get in.

•Power MUST be removed during installation.

•Do not attempt to disassemble the camera board from the camera.

•The warranty becomes void if repairs are undertaken by unauthorized persons.

•Contact the supplier if any functional problems arise.

CLEANING

•Do not use strong or abrasive detergents when cleaning this product.

•Use a dry cloth to clean the camera surface. In case the dirt is hard to remove, use a

mild detergent and wipe gently.

INTRODUCTION

VTC-C680 (VTC-C680DN for D&N) and VTC-C750 CCD Color Camera (VTC-

C750DN for D&N) are high performance standard box type color cameras that adopt

the most advanced 410,000 pixel 1/3” CCD. They are designed to have a conventional

camera appearance to act as a crime deterrent as well as remain unobtrusive when

installed. Its versatile design supports CS mount lens options allowing for various angles

according to the targeted installation environment. Their innovative LPF (Low Pass

Filter) and DSP technologies help represent natural colors. They are designed for indoor

use or outdoor use when installed in a weatherproof enclosure such as the

VITEK VT-EH10.

By utilizing a SONY CCD as well as a SONY HQ1 DSP, this camera provides

exceptionally sharp image quality up to 550TV Lines (for VTC-C750 & VTC-C750DN).

Through its backlight compensation function, it is able to give brighter and sharper

images of an object or objects darkened by background lighting or sunlight. Their highly

sensitive Super-HAD CCD also provides an auto white balance function, ensuring

accurate representation of colors under any lighting environment.

Either 24VAC or 12VDC (Non-Polarity) may be used with the use of a power adapter.

FEATURES:

•1/3" Sony DSP Super-HAD Interline Transfer CCD

•Resolution of 480 Horizontal Lines (VTC-C680 / C680DN) / 550 Horizontal Lines

(VTC-C750 / C750DN)

•10x Sensitivity enhancement with automatic optical filter (VTC-C680DN / C750DN)

•Switches to B/W, enabling IR sensitivity in night mode (VTC-C680DN / C750DN)

•Enhanced sharpness compensation

•Very low noise and superior picture quality

•Sensitivity of 0.02Lux (B&W) (VTC-C680DN / C750DN) & 0.2Lux (Color) (VTC-

C680 / C750)

•Supports DC (and Video) auto iris lens (VTC-C680 / C680DN)

•Automatic and Manual Removable IR Cut Filter (VTC-C680DN / C750DN)

•Digital signal processing (DSP)

•Automatic Shutter Control (AES)

•Automatic White Balance (ATW)

•Dual Voltage: 12VDC/24VAC

BBLLAACCKK

PACKAGE CONTENTS

1 x 1/3” Digital Color Camera

1 x Lens Connector Plug (VTC-C680 / C680DN Only)

1 x CCD dust protection cap

1 x Instruction Manual

CAMERA LAYOUT

1) Back Focus Adjustment

3) CCD Dust Protection Cap

5) Back Focus Adjustment Screw

2) C-Mount Adapter Ring

4) Lens Connector for Auto-Iris Lenses

6) Threaded Camera Mount

Auto-iris lens Lens Connector

PIN4 PIN2

PIN 3 PIN 1

Pin Video Drive DC Drive

Damp(-)

Damp(+)

Drive(+)

GND

V+(10V out)

No Connect

Iris Signal

GND

REAR CAMERA LAYOUT

1) Function Switches (SW1~4/8)

3) Lens Select Switch

5) Power Indicator LED

2) Iris Level Control

4) Video Output Connector

6) Power Input Terminal (Terminal Block)

VTC-C680 VTC-C680/DN

VTC-C750 VTC-C750/DN

BBLLAACCKK

EXTERNAL CONTROLS

Function ON OFF

ALC / ESC

Back Light Control (BLC)

Flickerless

Auto Gain Control (AGC)

ESC

Turbo

ALC

Off

Normal

Function ON OFF

ALC / ESC

Back Light Control (BLC)

Flickerless

Auto Gain Control (AGC)

Sharpness

Day / Night

IR Mode

N/A

ESC

Turbo

ALC

Off

Normal

Off

VTC-C680 & VTC-C750 Dip Switches:

VTC-C680DN & VTC-C750DN Dip Switches:

* Factory Defaults Shown in Bold.

Potentiometer for Iris level control:

Used to set the video level by adjusting the iris of the connected DC drive (or Video)

auto iris lens. This excellent lens control characteristic makes it very precise, very stable,

and very easy to adjust the video level.

Increase

Brightness.

(Clockwise)

Decrease

Brightness.

(Counter Clockwise)

EXTERNAL CONTROLS

SW 1. ALC / ESC (Default: ALC)

Used to select iris control mode. When set to ESC, camera operates in electronic

shutter control (ESC) mode and can be installed with a manual or fixed iris lens. ESC

mode is the most economic solution but may have some following disadvantages

comparative to ALC mode with auto iris lens:

•More smear and less clear image when shooting the very bright object.

•Color rolling or video level hunting may occur under the florescent light when the

camera operates in ESC and INT modes (NTSC version only).

When set to ALC, camera operates in auto iris lens control mode and should be

installed with an auto iris lens. Auto iris lens is used for best quality video.

SW 2. BLC (Backlight compensation) ON/OFF (Default: OFF)

If the subject you wish to view is too dim because of a bright background, set the BLC

switch to ON to compensate for the bright background. With BLC on, the background

brightness may saturate in some cases. This function may not operate properly if the

object is too small compared to the area of the background. This function can be used

with the linear shutter (EE or ESC) and be OFF with auto iris lens (Al lens or ALC

mode).

SW 3. Flickerless ON/OFF (Default: ON)

Flickerless mode is useful in areas where AC main is 50Hz and TV system is NTSC

such like Japan or AC is 60Hz and TV system is PAL to reduce the flicker under the

florescent light. Where FL is set to ON, the low light sensitivity is down about 30%.

SW 4. AGC Turbo ON/ OFF (Default: OFF)

AGC is Automatic Gain Control

SW 5. Sharpness ON/OFF (Default: ON)

SW 6. Day-Night (ICR) ON/OFF (Default: ON)

DAY-NIGHT ON/OFF SW enables or disables the day-night mode. If set to ON, day-

night mode is enabled and camera determines to enter / exit NIGHT mode from / to

DAY mode automatically according to the scene illumination. When the scene

illumination is getting darker than a half video level, camera changes its mode to NIGHT

and removes its optical filter to get a higher video level and switches to B/W mode.

In NIGHT mode, camera provides the real time B/W video and can accept the IR light.

When the illumination is getting brighter, camera returns to DAY mode and returns its

optical filter and switches to Color mode.

If set to OFF, camera operates just like a normal camera and does not perform NIGHT

mode.

BBLLAACCKK

EXTERNAL CONTROLS

SW 7 IR mode ON/OFF ((Default: OFF)

Used to reduce a possibility from Day to Night or reverse under a certain scene

illumination. This mode was derived from a IR Cut filter mechanism which is switched

from day to night or night to day based on scene illumination. A typical IR cut filter type

D/N camera could be switched from color to B/W or reverse under specific scene

illumination values, but sometimes iterations occur when switching from/to (Night <-->

Day) under specific external IR light source. VITEK IR mode can give a little margin of

the IR iteration at specific condition by increasing the threshold value (Night to Day)

adjustment.

When IR mode is enabled, it reduces iteration of the filter switch (repeated IN and-

OUT) during varying lighting conditions. In IR mode, the Night to Day threshold will be

around 6.0Lux and around 4.0Lux when off. The Lux is affected by scene illumination,

but has a limit to reduce IR iteration under stronger external IR light.

SW 8. N/A (Reserved for future usage)

POWER SUPPLY CONNECTIONS

VTC-C680 / C750 Cameras are dual voltage and can work with either 12VDC or

24VAC power. A polarity-matched connection for 12VDC supply is NOT required.

Primary and secondary grounds are completely isolated to reduce the possibility of

ground-loop problems. An operating voltage range of 9.5V-30V for DC and 12-28.8V

for AC provides extra installation flexibility.

Installation Notes:

Before applying voltage, first connect the power supply to the camera, then connect the

power supply to an AC source. Connecting a live power supply directly to the camera

could trigger an improper reset from power jitter and cause damage from surge voltage

when there is no load.

CLASS 2

C 24V

DC 12V

VTC-C680 / C750 SPECIFICATIONS

Image Device

Image Processor

Effective Pixels

Scan System

Scan freq.

Sync. System

Resolution

Sensitivity

S/N Ratio

Electronic Iris

White Balance

External Dip Switches

External Potentiometer

Video Output

Lens mount

Operating Power

Power Consumption

Operation Temperature

Dimensions (W x H x L)

Weight

1/3" Sony New Structure Super HAD Color CCD

DSP (Digital Signal Processor)

768(H) x 494(V)

2:1 Interlace

60Hz(V), 15.75Khz(H)

Internal

480TVL 550TVL

0.2Lux (F1.2@40IRE)

50dB (AGC OFF at 50IRE) 48dB (AGC OFF at 50IRE)

1/60 ~ 1/100,000sec

2000~8000ºK Automatic tracking

ALC/ESC, BLC, Flickerless, AGC

Video Level Adjustment (Iris)

Composite: 1.0 Vp-p / 75 Ohm

CS Mount

12VDC/24VAC (Dual Voltage)

3 Watts (max)

-10ºC~+50ºC, 85% RH. Max

2.56" x 2.17" x 4.17" (65mm x 55mm x 106mm)

5.29 Oz. (150g)

VTC-C680 VTC-C750

4.17” 2.56”

2.17”

Autres manuels pour VTC-C680

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Vitek Caméra de sécurité

Vitek

Vitek VT-IR1C/12 Manuel utilisateur

Vitek

Vitek VTC-C2BAZE Manuel utilisateur

Vitek

Vitek TRANSCENDENT VT-TPTZ10HRF-2T Manuel utilisateur

Vitek

Vitek TRANSCENDENT VT-TPTZ4AD-4M Manuel utilisateur

Vitek

Vitek STARLIGHT VTC-IRM30-2812 Manuel utilisateur

Vitek

Vitek VTC-IR302FN Manuel utilisateur

Vitek

Vitek Transcendent VTC-TNB8MADW Manuel utilisateur

Vitek

Vitek VTC-TNT4FL-2 Manuel utilisateur

Vitek

Vitek VTD-C510 Manuel utilisateur

Vitek

Vitek VT-IR1B/12 Manuel utilisateur

Vitek

Vitek Transcendent VTD-TND4FLN-2 Manuel utilisateur

Vitek

Vitek Transcend VTC-THB5R3/R2 Manuel utilisateur

Vitek

Vitek VTC-B01 Manuel utilisateur

Vitek

Vitek VTD-A2812 Manuel utilisateur

Vitek

Vitek Transcendent Series Manuel utilisateur

Vitek

Vitek Transcendent Series Manuel utilisateur

Vitek

Vitek Transcendent VTC-TNB5RMS Manuel utilisateur

Vitek

Vitek Transcendent Series Manuel utilisateur

Vitek

Vitek VTC-IRHCM1A Manuel utilisateur

Vitek

Vitek XPRESS SERIES Manuel utilisateur

Vitek

Vitek VTD-A4F/IWM Manuel utilisateur

Vitek

Vitek VTC-TNB5RFEA-2 Manuel utilisateur

Vitek

Vitek VTC-THB5R3 Manuel utilisateur

Vitek

Vitek VTC-TNB5WFC-2 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur