Vitek Mighty Series Manuel utilisateur
BLACK
VITEK
Mighty Series
WDR Dome
Cameras
700 TVL Pixim-Powered
WDR Dome Cameras
• Pixim D8800C Seawolf Digital Imaging System CMOS
• 700 TVL High Resolution
• WDR - Wide Dynamic Range
• 3DNR - Three Dimensional Noise Reduction
• Secondary Video Output (Cable Included)
• OSD (On Screen Display) for Camera Function Setup
• Flush or Surface Mount
• Infinity Ball Mount for Any Viewing Angle
• UTP interface and Heater / Blower Options Available
• UTC Control - Serial Control over Coax
• ¾” Conduit Knockouts
• Indoor and Vandal/Water Resistant IP 686 Rated Models
• Optional Extreme Cold (-60°F) Temperature Kit available
• Available in Ivory or Black
• Dual Voltage 12VDC & 24VAC
VITEK
TABLE OF CONTENTS
BOX CONTENTS
MOUNTING ACCESSORIES
AVAILABLE MODELS/ACCESSORIES
MIGHTY DOME LAYOUT
INSTALLATION
JUNCTION BOX INSTALLATION
OPEN GIMBAL COVER
CONNECTIONS
LENS ADJUSTMENT
INFINITE AXIS GIMBAL ADJUSTMENT
WDR MIGHTY DOME FEATURES
OSD MENU FEATURES/SETUP
1. In the menu
2. Entering Menu
3. MAIN
4. EXPOSURE
5. DAY/NIGHT
6. 3D NR
7. DC LENS or MANUAL LENS
8. PICTURE CONTROL
9. SPECIAL
10. MOTION
11. PRIVACY AREA
12. RS 485 CONTROL
13. D-EFFECT
14. EXIT
DIMENSIONS
HEATER/BLOWER SPECIFICATIONS
INDOOR MIGHTY DOME SPECIFICATIONS
VANDAL MIGHTY DOME SPECIFICATIONS
WARRANTY
1
1
2
3
4
5
6
7
8
9
10
10
11
11
11
12
13
14
14
15
15
16
17
18
18
19
20
21
22
23
26
VITEK
1
BOX CONTENTS
INCLUDED ACCESSORIES
1) Dome Camera
2) Accessories
3) VT-MD-2VOC (Secondary Video Output Cable)
4) Instruction Manual & Mounting Template
Torx Wrench - (Vandal & IR Versions Only)
Type #: T20
Length: 63mm / Diameter: 4mm
Qty: 1
Phillips head Screws - (Vandal & IR Versions Only)
For attaching the dome cover to the flush housing.
Type #: Phillips head M4x10
Length: 10mm / Diameter: 4mm
Qty: 4
Self Tapping Screws
For attaching the surface mount housing or the the flush mount base
to a solid surface.
Type #: Phillips St4x30
Length: 30mm / Diameter: 4mm
Qty:4
Self Tapping Screws - (Indoor Version Only)
For attaching the dome cover to the flush housing.
Type #: Phillips St4x12
Length: 12mm / Diameter: 4mm
Qty: 4
Dowels
If necessary, use the to help secure the self tapping screws.
Length: 30mm / Diameter: 7mm
Qty: 4
Secondary Video Output Cable for Mighty Domes:
VT-MD-2VOC
For viewing video image during installation.
Qty: 1
Mounting Template
Qty: 1
Mounting Template
Surface Mount
109.0
70.0
black
2
AVAILABLE MODELS / ACCESSORIES
Indoor MIghty doMe ConfIguratIons:
VTD-MP2810WDR: Indoor Wide Dynamic Range Color Dome Camera with
2.8-10mm Varifocal Lens & 700TVL
VTD-MP922WDR: Indoor Wide Dynamic Range Color Dome Camera with
9-22mm Varifocal Lens & 700TVL
VTD-MP1850WDR: Indoor Wide Dynamic Range Color Dome Camera with
18-50mm Varifocal Lens & 700TVL
Vandal resIstant MIghty doMe ConfIguratIons:
VTD-MVP2810WDR: Vandal Resistant Wide Dynamic Range Color Dome
Camera with 2.8-10mm Varifocal Lens & 700TVL
VTD-MVP922WDR: Vandal Resistant Wide Dynamic Range Color Dome
Camera with 9-22mm Varifocal Lens & 700TVL
VTD-MVP1850WDR: Vandal Resistant Color Dome Camera with 18-50mm
Varifocal Lens & 700TVL
optIonal Mounts & aCCessorIes:
1. Heater/Blower Option 24VAC: (Vandal Resistant Models)
2. UTP Option: Unshielded Twisted Pair Transceiver Built-In
3. VT-MD/FMP: Flush Mount Plate for installation in drop ceilings or can be used
as cover plate when using 4S Junction Box
4. VT-MD/PLMT: Mighty Dome Pole Mount Adapter - Requires VT-MD/WMT
Wall Mount
5. VT-MD/CMT: Mighty Dome Ceiling/Pedestal Mount (Can be extended if
necessary)
6. VT-MD/CNMT: Mighty Dome Corner Mount Adapter - Requires
VT-MD/WMT Wall Mount
7. VT-MD/WMT: Mighty Dome Wall Mount (Available In Ivory or Black)
1. 2. 3. 4. 5. 6. 7.
3
MIGHTY DOME LAYOUT
1) Lens
2) Power Input Connector(12VDC /
24VAC)
3) Video Output Connector - BNC
4) Camera Holder and 2nd Video
output
5) Ball with the Camera Assembly
6) Safety Wire
7) Bubble
8) Dome Cover Ring
9) Flush Mount Base
10) Surface Mount Plate
11) Assembly Screws - Torx M4x9
(Vandalproof)
12) Assembly Screws - Phillips
ST4x12 (Indoor) / Phillips M4x10
(Vandalproof / IR)
13) Mounting Screws - Phillips ST4x30
BLACK
4
INSTALLATION
1) Dome Cover
1.1 Vandal Proof Domes - Use the provided Torx wrench to unscrew the vandal
proof screws and remove the dome cover.
1.2 Indoor Domes - Turn the dome cover to the left to remove the dome cover.
2) Flush Mount Installation:
Using four St4x30 screws, attach the flush mount base to a sturdy surface.
Optional flush mount decorator plate. Model: VT-MD-FMP
3) Surface Mount Installation:
Drill pilot holes at the mounting location using the provided mounting template.
Using four St4x30 screws, mount the surface mount housing to a sturdy
surface. Using four ST4x12 (Indoor) screws or M4x10 (Vandal-proof) screws,
attach the flush mount base to the surface mount housing.
5
JUNCTION BOX INSTALLATION
Mighty Domes can easily be flush or surface mounted to an electrical junction
box (4S J-Box) using the pre-drilled mounting holes on either the surface mount
housing or the the flush mount base.
BLACK
6
OPEN GIMBAL COVER
To adjust the zoom and the focus, the gimbal needs to be removed temporarily
from its base.
1) Remove the ball gimbal from its socket, and hold the base firmly with one hand.
2) Gently squeeze Point A and B and pull away from the base until the gimbal is
removed from the base.
3) Replace the Gimbal cover by aligning the cover to the base and pressing down
until it snaps back onto the base.
7
CONNECTIONS
• Power connection: 12VDC or 24VAC dual input.
• All Mighty Dome cameras come standard with a secondary video output. The
secondary video cable (VT-MD-2VOC) is included in the box.
VTM-LCD
BLACKBLACK
8
LENS ADJUSTMENT
1) Remove the Gimbal cover from the Gimbal base.
2) Loosen Zoom & Focus screws and make necessary adjustments as shown.
Field of view: Telephoto(T) to Wide(W)
Focus: Near(N) to infinity( )
3) OSD Joystick Control
4) Reattach the gimbal cover to the gimbal base.
OSD Joystick
Control
3
8
Autres manuels pour Mighty Series
1
Ce manuel convient aux modèles suivants
6
Table des matières
Autres manuels Vitek Caméra de sécurité
Vitek
Vitek VTC-C770/WDR Manuel utilisateur
Vitek
Vitek VTC-IRHCM1 Manuel utilisateur
Vitek
Vitek VTC-B74 Manuel utilisateur
Vitek
Vitek Alpha Series Manuel utilisateur
Vitek
Vitek VTD-HOC4F/I Manuel utilisateur
Vitek
Vitek VTC-EB15B Manuel utilisateur
Vitek
Vitek Transcendent VTD-TND4FLN-2 Manuel utilisateur
Vitek
Vitek Transcendent VTC-TNB8RMA3 Manuel utilisateur
Vitek
Vitek VTC-TNB4RMA4 Manuel utilisateur
Vitek
Vitek VT-PTZ10T Manuel utilisateur
Vitek
Vitek Transcendent Series Manuel utilisateur
Vitek
Vitek VTC-EB15B Manuel utilisateur
Vitek
Vitek TRANSCENDENT VT-TPTZ4AD-4M Manuel utilisateur
Vitek
Vitek INDOOR MIGHTY DOME - Manuel utilisateur
Vitek
Vitek VTC-LED667HRCB Manuel utilisateur
Vitek
Vitek VTD-TND5RMEA Manuel utilisateur
Vitek
Vitek Transcendent VTC-TNB8RFS-2 Manuel utilisateur
Vitek
Vitek Transcendent VTD-TND4RFA3/-2 Manuel utilisateur
Vitek
Vitek Transcendent VT-TPTZ25HRAN-4PNL Manuel utilisateur
Vitek
Vitek VT-PTZ220N Manuel utilisateur
