Vision Drive VD-9500H Manuel utilisateur
CAR BLACK BOX
®
'VMM -$%
Ver. 1.0E
User Manual
Before Use
Operational Precautions
Contents
Part Names
Product Specifications
Installation Precautions
Installation Procedure
How to Use
Touch Screen LCD
PC viewer on windows based computers
Service and Support
Warranty
1.
2.
3.
4.
5.
6.
7.
1.
1.
2.
1.
2.
2
4
6
7
8
9
10
17
20
30
42
43
..................................................
....................................
.....................................................
..................................................
......................................
....................................
......................................
.................................................
.........................................
................
.......................................
....................................................
Index
General Info.
Basic Info.
Using the Menus
Additional Info.
General Info._ 1. Before Use
Thank you for purchasing the VISIONDRIVE proudly designed and manufactured by
VisionDrive Co., Ltd in Korea.
Please read the product manual carefully before use so you can be informed of all the features of
this advanced product.
This product is a secondary device for safe driving as such the manufacturer and their
approved agents cannot be held liable or responsible for any loss of data experienced
through the operation of the unit.
This product is designed to record / save / play and analyze videos related to impacts /
accidents or videos recorded at your own discretion while driving. Product features can be
different according to driving conditions, the status of the car as well as firmware version on
the unit. (Firmware updates are supplied by the manufacturer as required to improve product
quality and stability)
Note that the operating environment and SD memory card status may affect video recording
so please take this into consideration.
This product records and saves videos related accidents which are triggered by an internal
Shock Sensor. In instances where the shock is not sufficient to activate the event mode you
are recommended to press SHOT button to store the data into the separate event folder.
Updates to this manual (which are subject to change without notice to improve understanding
and any new features will be posted on VISIONDRIVE website.
Please refer to www.visiondrive.co.kr/eng
-
-
-
-
-
2
Scope of Warranty and Liability
visiondrive.co.kr
General Info._ 1. Before Use
SD memory card use and precautions
3
This product is recommended to work with only the SD card dedicated to VISIONDRIVE. Please
contact the dealer/agent or distributor to purchase a new one when the SD card is lost or
damaged.
Please make sure to use dedicated SD card as the use of non authentic, defective or faulty SD
cards might result in loss of recorded video content.
Failure to completely power down the recorder before removing the SD card will damage the card
and any current recording in progress. Please always power down the recorder so that no lights
are illuminated before removing the SD card. Also please follow Windows based procedures to
Safely Eject Removable Media on your computer as failure to do so will also damage the SD card.
SD card damage through failure to power down the recorder or safely eject the media is not
covered under support or warranty.
Also store the SD card in its carry case when not in use to protect it from static discharge and
other external elements.
SD cards are a consumable item so please note that SD cards are only guaranteed with us for six
months as some sector loss is expected and could result in data loss in which case a replacement
SD card should be sourced and used in your recorder.
To pull out the SD card while writing, copying or deleting data in SD card may cause data loss,
damage of data or SD card itself.
We are not responsible for any recorded data destruction or loss.
Please copy and archive important recorded data/files on other media. (hard disk, CD, portable
memory, etc.)
visiondrive.co.kr
General Info._ 2. Operational Precautions
4
Please keep these instructions in mind for safe and proper use of the product by preventing
unexpected accident or risks in advance. We will not be responsible for the problems arising from
failure to follow the instructions contained within this manual.
You are required to deal with the product safely. If you need to do something with it we ask that
you stop and park the vehicle in a safe place before engaging with the recorder via the touch
screen. Never interact the device whilst the vehicle is in motion.
Do not disassemble or modify this product. This prohibited action may cause accidents such as an
electric shock and the product is not guaranteed for further after service or support. Any products
requiring inspection or repair should be returned to the agent/dealer in the first instance.
DC12V ~ DC24V is the allowed voltage range for proper operation of the device without
malfunction or fire.
Cables other than the supplied units or by connecting the cable to a different power source, may
result in recorder malfunction or fire. In addition, please carefully manage wires and cable routing
to prevent damage to the cable.
If the vehicle is not used for a long time, disconnect the power cable from the recorder as
continued long term use could discharge the vehicles primary battery.
When mounting the product in the vehicle, follow the procedure to attach it securely to the inside
of the vehicle glass. Impurities on the vehicle windshield mounting surface may weaken the
adhesive strength. If the product falls from its mount it may be damaged.
This product and its accessories are not waterproof. Under no circumstances should you expose
the product to liquids or impurities.
Do not use chemicals or detergents to clean the device. This can result in malfunctioning of the
product.
Accumulation of impurities on the camera lens or the window surface near the camera may result
in diffused or abnormal refraction phenomena. You may not get a clean image from this so please
ensure that the area surrounding the product, camera lens is kept clean.
visiondrive.co.kr
General Info._ 2. Operational Precautions
Excessive tinting on the window may also distort or reduce the clarity of recorded data.
Recording can be distorted under the condition where brightness suddenly changes like passing
through a tunnel, direct sunlight reflection during daytime or where only low light is available at
night time.
If not enough light is available, the use of additional external lighting may improve the
performance of the recorder.
In case of slight impact, the product may not be able to classify it as an event file automatically (it
is however recorded as a Normal file). In such cases, please use the SHOT button to force the
creation an event file manually.
Dropping or strong shocks applied to this product will cause malfunctions.
Please try to keep the product away from water, fire, hot, cold or humid environments. If
long-term exposure to the summer sun light or too low temperatures, deformation or malfunction
may occur.
5
visiondrive.co.kr
General Info._ 3. Contents
Please make sure that all of contents are included in good condition, if not then please contact
your dealer to correct any detected issues.
( Specifications and contents are subject to change without notice and this manual can also be
provided in soft copy format. This product image can vary depending on the model. )
Recorder Main Body
Mounting Bracket SD card
(8~128GB
varies as per order)
Cable Holders Cigarette Lighter
Power Adapter
Second Camera and Connecting Cable
External GPS Module
(Optional – required for
GPS information embedding)
General Info._ 4. Part Names
7
visiondrive.co.kr
-$%4DSFFO
4%$"3%4-05
#3"$,&5
"44&.#-&%
$".&3"
108&31035
&951035
5&$)46110351035
(141035 015*0/"-4&$0/%
$".&3"1035
$0//&$5*/(
$"#-&1035
.*$
(14-&%
3&$-&% 70*$&-&%
"VEJP3&$-&%
108&3-&%
*."(&4&/403-&%
* Over 64GB SD (exFAT) is compatible by formatting it as FAT 32, cluster size 64KB format with a formatter.
* 8GB ~ 128GB SD card can be properly formatted through Menu > System Settings > Additional Settings
> format
Model VD-9500H VD-9600WHG/B
Camera(s)
2 Cameras
Main : HD Color CMOS Digital
cameras
Main : HD WDR Color CMOS
Digital Camera
Second : HD Color CMOS digital cameras
Resolution 1280 x 720(HD) 30fps + 1280 x 720(HD) 30fps (2ch Mode)
Display 3.2” TFT Color Touch LCD
Recording Normal/Event/Emergency/Parking Mode based on All-time
recording
Lighting Environment Min. 0.1 Lux
Camera Angle Diagonal 126° (Front) /
Diagonal 132° (Rear)
Diagonal 110° (Front) /
Diagonal 132° (Rear)
Camera Rotation Vertical 65° (Front)
GPS External GPS Module (Sirf IV) (Optional)
G-Sensor Built-in 3-Axis Shock Sensor (x-y-z)
Storage SD(HC) memory card 8G ~ 128G compatible
(*Over 64GB supportive to FAT 32 format, cluster size 64KB)
Audio Recording Built-in MIC
Voice Announcement Built-in Speaker
Event Recording 10 sec. before impact ~ 15/25/35/45 sec. after impact
Power Supply DC 12V ~ 24V Cigarette Lighter Power Adapter
Emergency Power EDLC for Emergency Power Backup (Capacitor)
Operating Temperature Range -20 °C ~ 65 °C
Car Battery Monitoring Low Voltage Detection / Control
Dimensions 100mm * 77mm * 30mm
Operating System Support Windows XP / VISTA / Windows 7 / Windows 8
Image Analysis Dedicated PC viewer (Based on AVI format)
Security Security LED
General Info._ 6. Installation Precautions
9
visiondrive.co.kr
- It is recommended to use only authorized SD cards provided with the VisionDrive® product.
- Only install the product after parking the vehicle in a bright and safe area.
- Make sure that you start installation with the power source completely turned off. The power
connection should be the last step of the installation.
- Use the power cable provided with the product for the cigarette lighter power connection in the
range of DC12V to DC24V. If power wiring is involved, we recommend a professional service for
the installation.
- Prior to the installation, clean the area of the installation where the camera will be positioned.
- DO NOT eject the SD card when the product is in operation or when starting / booting up.
- DO NOT attempt to disassemble, modify or repair the product yourself in any way.
For safe installation and operation, carefully read all the information stated below.
DO NOT disconnect the power supply while the system is booting up for start or update.
Please keep it in mine that the product can be off for a short period of time during
start-up.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Vision Drive Caméra embarquée
Vision Drive
Vision Drive VD-7000W Guide de démarrage rapide
Vision Drive
Vision Drive VD-3000 Manuel utilisateur
Vision Drive
Vision Drive VD-1600HD Manuel utilisateur
Vision Drive
Vision Drive VD-3000 Manuel utilisateur
Vision Drive
Vision Drive VD-7000W Manuel utilisateur
Vision Drive
Vision Drive VD-9000FHD Manuel utilisateur
Vision Drive
Vision Drive VD-1500MG/1500MB Manuel utilisateur
Vision Drive
Vision Drive Black Box VD-9000FHD Manuel utilisateur
Vision Drive
Vision Drive VD-8500WHG Manuel utilisateur
Vision Drive
Vision Drive VD-3000 Manuel utilisateur
