VIRTUFIT CTR 1.0 Manuel utilisateur

CTR 1.0 Crosstrainer

ENG

User manual

2VirtuFit CTR 1.0 Crosstrainer

ENG

INDEX

Important safety notice 3

Assembly instructions 4

Maintenance 9

Operating Guide 10

Technical drawing 13

Parts list 15

3VirtuFit CTR 1.0 Crosstrainer

ENG

IMPORTANT SAFETY NOTICE

WARNING: We suggest that you should consult with your physician or health

professional before starting your workout, especially for the age up to 35 old or people

with health problems. We take no responsible for any problems or injuries if you don’t

follow our specication.

IMPORTANT

- This elliptical trainer is made for home use only and tested up to a maximum body weight of 115 kgs.

- Follow the steps of the assembly instructions carefully.

- Use only original parts as delivered.

- Before the assembly, be sure to check if delivery is complete by using the included partslist.

- For assembly use only suitable tools and asks for assistance with assembly if necessary.

- Place the exerciser on an even, non-slippery surface. Because of possible corrosion, the usage of anY

exerciser in moist areas is not recommended.

- Check before the rst training and every 1-2 months that all connecting elements are tight tting

and are in the correct condition. Replace defective components immediately and/ or keep the

equipment out of use until repair. For repairs, use only original parts.

- In case of repair, please ask your dealer for advice.

- For repairs, use only original spare parts.

- Avoid the use of aggressive detergents when cleaning the home exerciser.

- Ensure that training starts only after correct assembly and inspection of the item.

- For all adjustable parts be aware of the maximum positions to which they can be

adjusted/ tightened to.

- The home exerciser is designed for adults. Please ensure that children use it only under the supervi

sion of an adult.

- Ensure that those present are aware of possible hazards, e.g. movable parts during training.

- Warning: incorrect/excessive training can cause health injuries.

- Consult your physician before starting with any exercise program. He or she can advise on the kind of

training and which impact is suitable.

4VirtuFit CTR 1.0 Crosstrainer

ENG

ASSEMBLY INSTRUCTION

Before you start to assemble the device, please read the following points carefully:

1. Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoam

and the device yourself. Some parts (bolts, screws, etc.) are already attached to / in the device.

2. Error message: Make sure that all cables are carefully attached. The adjusable feet are very sensitive and

should remain straight. Do you get an error message after the installation of your cross trainer? Then you

should bend these adjustable feet straight again, this may cause the error message to disappear.

3. Transport wheels: Make sure that the transport wheels are attached to the front of the device.

4. Allen screws: In the upright of crossbar are hex bolts, make sure that the Allen key is properly in the bolt

before you apply force to the key. In this way you prevent the head of the socket head from being turned.

STEP 1

– Attach the Front Stabilizer (35) and the Rear Stabilizer (36) to the Main Frame (40)

with Carriage Bolt (33), Domed Nut (23) and Arc Washer (22).

5VirtuFit CTR 1.0 Crosstrainer

ENG

– Turn the resistance knob all the way. Cable (53) needs to be as long as possible.

– Connect the Sensor 16 and 38,and Tension Control wire 53 and 39 as shown above, x the

Upright Post (15) with the Main Frame (40) with Bolt (26), Arc Washer (22). Fasten tightly.

Note: Tighten the Screw (27) and the Arc Washer (22) after the STEP 3.

STEP 2

ASSEMBLY INSTRUCTION

6VirtuFit CTR 1.0 Crosstrainer

ENG

– Fix the Lower Handle Bar (25L/R)to the Upright Post (15) with Bolt (18) ,Washer (9), D Washer (19).

– Fix the Pedal Tubes (42L/R) with the Pedal Crank by Pedal Hinge Bolt (46L/R)Curved Washer (50),

and Nylon Nut (51L/R). Install the Pedal (44) on the Pedal Tube (42L/R) with Hex Head Bolt(43),

Knob (27).

STEP 3

ASSEMBLY INSTRUCTION

7VirtuFit CTR 1.0 Crosstrainer

ENG

– Install the Middle handlebar (4) on the Upright Post (15) with bolt (8) Arc Waser (9);

– Fix the Handlebar ( 11 L / R ) to the Lower Handle Bar ( 25 L / R ) with Bolt (21),

Arc Washer (85) and Domed Nut (23).

STEP 4

ASSEMBLY INSTRUCTION

8VirtuFit CTR 1.0 Crosstrainer

ENG

STEP 5

ASSEMBLY INSTRUCTION

– Connect wires ( 1a / 1b ) to wires ( 4a / 4b ) Handle Pulse Wire (1a) and (1b), then connect Sensor

wire (16) to the Computer (1);

x the Computer (1) onto the Upright Post (15) with Screw (2) and Washer (103);

– Attach the Bottle Holder (98) to the Support Tube (15) with Crosshead (99);

– Then, put the Bottle (100) in the Bottle Holder (98).

CAUTION: MAKE SURE YOU HAVE TIGHTENED ALL THE BOLTS AND NUTS WELL BEFORE BE

GINNING YOUR WORKOUT.

NOTE: THE END CAP ON THE FRONT STABILIZER TUBE IS MOVABLE, WHICH IT IS EASY FOR

YOU TO MOVE YOUR ELIPTICALL.

9VirtuFit CTR 1.0 Crosstrainer

ENG

MAINTENANCE

1. The upright is xed with Allen screws, making sure that the bolts are tight at all times. If the bolts

are not tightened tight enough, this can cause cracking.

2. All moving parts mounted on the base of the device should be greased with grease once every 6

months. This can be done with Vaseline (without acids) or with silicone oil.

3. After each use, the appliance should be cleaned with a slightly damp cloth and soft soap. If the

perspiration is not removed in time, corrosion can occur.

4. Do not place the cross trainer in a room with high humidity. For example, a shed or a room where

the washing machine is located.

PROBLEM SOLUTIONS

Squeaky crosstrainer: First lubricate all rotating parts with silicone spray. It can also be that a screw is

tightened too tightly or too loosely, this creates friction and therefore a beep. If this is the case, try to nd

out exactly where the beep is coming from and then loosen or tighten this screw. The screws should be

tightened in such a way that they can always be released by hand.

No resistance: First check whether you can hear the motor running. You will hear the motor spin very

briey when you increase or decrease the resistance. If you hear the engine running then all electronics

are OK, but the V-belt probably ended. You can then open the housing and replace the V-belt. If you do

not hear the motor running, it may be that the motor or display is defective. First check whether the cable

that runs upwards in the pipe is connected properly.

Ticking sound: It is possible that the ywheel (in the housing) comes against a cable with every pedaling.

This may be disturbing but will not cause permanent damage to your cross trainer. To solve this, open the

housing and move the cable or you can fasten it with for example a tie-wrap.

Heart rate display does not work: This can have various causes. 1. The sensor cable running from the

heart rate sensor to the display is not properly mounted or has come o during use. 2. It may be that the

sensors have become damp, dirty or greasy, clean them regularly. 3. If you have a lot of calluses on your

hands, it is more dicult for the sensors to measure, when this is the case a chest strap is recommended.

10 VirtuFit CTR 1.0 Crosstrainer

ENG

LOOPBAND AFSTELLEN

OPERATING GUIDE

BUTTON FUNCTION EXPLANATION

(1) MODE Push down for selecting functions. If the long time holds down “MODE” button

down for resetting time, distance and calories.

(2) SCAN

Press “MODE” button until “SCAN” appears, monitor will rotate through all the 6

functions: Time, speed, distance, ODO, calorie, pulse. Each display will be hold 5

seconds.

(3) TIME Count the total time from exercise start to end.

(4) SPEED Display current speed.

CONTROL PANEL

Autres manuels pour CTR 1.0

Table des matières

Autres manuels VIRTUFIT Équipement de fitness

VIRTUFIT

VIRTUFIT Upright Dumbbell Rack Manuel utilisateur

VIRTUFIT

VIRTUFIT VFROWWRB Manuel utilisateur

VIRTUFIT

VIRTUFIT VIFROWSP Manuel utilisateur

VIRTUFIT

VIRTUFIT Hyperextension Pro Manuel utilisateur

VIRTUFIT

VIRTUFIT CTR 1.0 Manuel utilisateur

VIRTUFIT

VIRTUFIT Etappe 1 Manuel utilisateur

VIRTUFIT

VIRTUFIT RB 1.0 Manuel utilisateur

VIRTUFIT

VIRTUFIT CTR 1.1 Manuel utilisateur

VIRTUFIT

VIRTUFIT iConsole HTR 2.1 Manuel utilisateur

VIRTUFIT

VIRTUFIT KH2 Manuel utilisateur

VIRTUFIT

VIRTUFIT KH 1 Manuel utilisateur

VIRTUFIT

VIRTUFIT Easy Fit Crosstrainer Manuel utilisateur

VIRTUFIT

VIRTUFIT iConsole HTR 2.1 Manuel utilisateur

VIRTUFIT

VIRTUFIT Water Resistance Aqua 100i Manuel utilisateur

VIRTUFIT

VIRTUFIT Doorway Gym Bar Manuel utilisateur

VIRTUFIT

VIRTUFIT Balance Trainer Pro with Fitness Elastics Manuel utilisateur

VIRTUFIT

VIRTUFIT Water Resistance Row 800 Manuel utilisateur

VIRTUFIT

VIRTUFIT ST10 Manuel utilisateur

VIRTUFIT

VIRTUFIT Water Resistance Row 900 Manuel utilisateur

VIRTUFIT

VIRTUFIT Etappe 2.0i Spinbike Manuel utilisateur

VIRTUFIT

VIRTUFIT Elite TR-500i Manuel utilisateur

VIRTUFIT

VIRTUFIT iConsole Manuel utilisateur

VIRTUFIT

VIRTUFIT Power Tower Deluxe Manuel utilisateur

VIRTUFIT

VIRTUFIT Power Rack Pro Manuel utilisateur

Manuels Équipement de fitness populaires d'autres marques

NSD

NSD PB-188P Manuel utilisateur

Performance

Performance HyperVibe Manuel utilisateur

Scalamobil

Scalamobil S27 Manuel utilisateur

Precor

Precor Experience Series Manuel utilisateur

FYTTER

FYTTER RedMIUM BENCH BE-T6R Manuel utilisateur

Taurus

Taurus TF-RK1312 Manuel utilisateur

Nustep

Nustep T5 Manuel utilisateur

Precor

Precor CW-507 Manuel utilisateur

Movement

Movement BICEPS Idea Manuel utilisateur

Kegel8

Kegel8 V For Men Manuel utilisateur

Skandika

Skandika Styrke II Manuel utilisateur

BLK BOX

BLK BOX 21-0122-0B Manuel utilisateur

Stamina

Stamina aeropilates premier 299 Manuel utilisateur

SPORTSTECH

SPORTSTECH PBX300 Manuel utilisateur

ParaBody

ParaBody Serious Steel 877102 Manuel utilisateur

Weslo

Weslo Gym 650 Manuel utilisateur

Rebel

Rebel ACTIVE RBA-1011 Manuel utilisateur

4iiii

4iiii FLiiiight Manuel utilisateur