ViewSonic PD1012 Manuel utilisateur
PD1012
Pen Display
User Guide
Model No. VS15685
i
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical
and Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as
unsorted municipal waste, but use the return and collection systems
according to local law.
If the batteries, accumulators and button cells included with this
equipment, display the chemical symbol Hg, Cd, or Pb, then it means
that the battery has a heavy metal content of more than 0.0005%
Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
Compliance Information
ii
Important Safety Instructions
1. DO NOT place objects on top of the device, as objects may scratch the
screen.
2. DO NOT expose the device to dirty or dusty environments.
3. DO NOT place the device on an uneven or unstable surface.
4. DO NOT insert any foreign objects into the device.
5. DO NOT expose the device to strong magnetic or electrical eld.
6. DO NOT expose the device to direct sunlight as it can damage the LCD
Screen. Keep it away from heat sources.
7. DO NOT use the device in the rain.
8. Please check with your Local Authority or retailer for proper disposal of
electronic products.
9. The device may produce some heat during normal operation or
charging. To prevent discomfort or injury from heat exposure, DO NOT
leave the device on your lap.
10.POWER INPUT RATING: Refer to the rating label on the device. Only
use accessories specied by the manufacturer.
11.DO NOT use any sharp object to tap the screen.
12.Clean the touch screen with a soft cloth. If needed, dampen the cloth
slightly before cleaning. Never use abrasives or cleaning solutions.
13.Disconnect the device from an electrical outlet and power off before
cleaning the device.
14.DO NOT disassemble the device. Only a certied service technician
should perform repair.
15.Users have to use the connection to USB interfaces with USB 2.0
version or higher.
iii
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with
Directive 2011/65/EU of the European Parliament and the Council on
restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS2 Directive) and is deemed to comply with
the maximum concentration values issued by the European Technical
Adaptation Committee (TAC) as shown below:
Substance Proposed Maximum
Concentration
Actual
Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE) 0.1% < 0.1%
Certain components of products as stated above are exempted under the
Annex III of the RoHS2 Directives as noted below:
Examples of exempted components are:
1. Mercury in cold cathode uorescent lamps and external electrode
uorescent lamps (CCFL and EEFL) for special purposes not exceeding
(per lamp):
(1) Short length (≦500 mm): maximum 3.5 mg per lamp.
(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per
lamp.
(3) Long length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in glass of cathode ray tubes.
3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.
4. Lead as an alloying element in aluminium containing up to 0.4% lead by
weight.
5. Copper alloy containing up to 4% lead by weight.
6. Lead in high melting temperature type solders (i.e. lead-based alloys
containing 85% by weight or more lead).
7. Electrical and electronic components containing lead in a glass or
ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic
devices, or in a glass or ceramic matrix compound.
iv
Copyright Information
Copyright © ViewSonic Corporation, 2014. All rights reserved.
ViewSonic and the three birds logo are registered trademarks of ViewSonic
Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or edito-
rial errors or omissions contained herein; nor for incidental or consequential
damages resulting from furnishing this material, or the performance or use of
this product.
In the interest of continuing product improvement, ViewSonic Corporation
reserves the right to change product specications without notice. Informa-
tion in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any
means, for any purpose without prior written permission from ViewSonic
Corporation.
Product Registration
To meet your future needs, and to receive any additional product informa-
tion as it becomes available, please register your product on the Internet at:
www.viewsonic.com.
For Your Records
Product Name: PD1012
ViewSonic Pen Display
Model Number: VS15685
Document Number: PD1012_UG_ENG Rev. 1A 04-07-14
Serial Number: ____________________________________
Purchase Date: ____________________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living
green. Thank you for being part of Smarter, Greener Computing. Please visit
ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
v
Contents
Compliance Information............................................................ i
Important Safety Instructions.................................................... ii
Declaration of RoHS2 Compliance......................................... iii
Copyright Information ............................................................. iv
Product Registration............................................................... iv
1. Introduction.......................................................................... 1
1.1 Packing List ..................................................................................... 1
1.2 Product Overview ............................................................................ 1
2. Installation and Setup.......................................................... 3
2.1 Installing the Driver.......................................................................... 3
2.2 Setting the display area................................................................... 6
2.3 Handwriting Area Mapping .............................................................. 7
2.4 More Touch Function Settings......................................................... 9
3. Troubleshooting.................................................................11
3.1 Monitor problems........................................................................... 11
3.2 Interactive Pen Problems .............................................................. 12
3.3 Control key Problems .................................................................... 12
4. Product Specication.........................................................13
4.1 Monitor .......................................................................................... 13
4.2 Interactive Pen .............................................................................. 14
5. Appendix............................................................................15
5.1 Replacing a pen tip........................................................................ 15
Customer Support .................................................................16
Limited Warranty ...................................................................17
1
1. Introduction
1.1 Packing List
After unpacking, make sure that all of the following contents are included:
Pen Display
Quick Start Guide
Software CD
Micro USB 3.0 Y-type Cable
Mini USB 2.0 - USB Canle
Pen tip replacement tool
Interactive Pen
Pen tip x 3
Warranty catd (For China only)
Pen Strap
If there is a defect or missing part, please contact your dealer.
1.2 Product Overview
1.2.1 Front and Side View
①Display and pen touch area.
②Power button and Light indicator: Red for no signal input; Blue for
screen on; Blank for no power or when screen is turned off.
③Control key buttons: 1-[Left-Shift], 2-[Left-Ctrl], 3-[Left-Alt], 4-[Space].
④P1 Port: It is Mini-B type for signal input.
P2 Port: It is Micro-B type for power input (In addition to using the
Micro 3.0 main power supply, you can also use an external power
supply. Please refer to the specication page for the recommended
power adapter.)
2
1.2.2 Rear View
⑤Interactive pen holder strap
⑥Stand (x2)
⑦Kensington lock
⑧ Foot rubber (x4)
⑨Rear label
⑩Micro 3.0 Port: for signal input and power supply
Caution: Avoid the risk of electric shock. Do not open the housing by
yourself. Please contact maintenance personnel if any problem
countered.
1.2.3 Interactive Pen
The interactive pen uses electromagnetic resonance technology, and is
battery free.
3
2. Installation and Setup
2.1 Installing the Driver
Use the included Micro USB 3.0 Y-type cable to connect the device to
your desktop or notebook PC, as shown below. The screen will be off,
but the red LED indicator light will turn on.
Note: When connecting the device to a PC/NB, plug in both of the USB
connectors to make sure there is sufcient power.
2.1.1 Installing DisplayLink display drivers and software
(Recommendation: When installing the DisplayLink driver, please
make sure the Pen Display is connected to your PC or notebook.)
1) Open the accompanying driver and software CD, click on
DisplayLink_xx.exe to start the installation on Windows (For
installation on Mac OS, click Displaylink Installer-xx.dmg). After
installation you may be prompted to restart your computer.
Note: The latest DisplayLink DisplayLink driver is available for free
download at: http://www.displaylink.com/support/downloads.php
4
2.1.2 Handwriting driver installation
1) Open the driver CD, and click on Pen Display xxx.exe to start
installation on Windows. For installation on Mac OS, click Installxxx.
dmg.
Table des matières
Manuels Tiroir LCD populaires d'autres marques
Acnodes
Acnodes KD 8228 Manuel utilisateur
Ameriwood
Ameriwood 9524328PCOM Manuel utilisateur
Kesseböhmer
Kesseböhmer TANDEM solo Manuel utilisateur
Crystal Image Technologies
Crystal Image Technologies RMD-151-A Series Manuel utilisateur
APW Wyott
APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur
NTI
NTI RACKMUX-V17-N Manuel utilisateur
GRASS
GRASS DWD XP Manuel utilisateur
StarTech.com
StarTech.com DuraView RACKCONS1701 Manuel utilisateur
Fisher & Paykel
Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCD1U17-44 Manuel utilisateur
Fujitsu
Fujitsu RC25 Manuel utilisateur
Acnodes
Acnodes RK 1000B Manuel utilisateur