Viessmann Vitodens 200-W System Manuel utilisateur

Installation and service

instructions

for contractors

VIESMANN

Vitodens 200-W

Type B2HA, 45 and 60 kW

Wall mounted gas condensing boiler

Natural gas and LPG version

For applicability, see the last page

VITODENS 200-W

5585 174 GB 1/2014 Please keep safe.

Please follow these safety instructions closely to prevent accidents and mate-

rial losses.

Safety instructions explained

Danger

This symbol warns against the

risk of injury.

!Please note

This symbol warns against the

risk of material losses and envi-

ronmental pollution.

Note

Details identified by the word "Note" con-

tain additional information.

Target group

These instructions are exclusively inten-

ded for qualified contractors.

■ Work on gas installations must only be

carried out by a registered gas fitter.

■ Work on electrical equipment must

only be carried out by a qualified elec-

trician.

■ The system must be commissioned by

the system installer or a qualified per-

son authorised by the installer.

Regulations

Observe the following when working on

this system:

■ Statutory regulations regarding the

prevention of accidents

■ Statutory regulations regarding envi-

ronmental protection

■ The Code of Practice of relevant trade

associations

■ All current safety regulations as

defined by DIN, EN, DVGW, TRGI,

TRF, VDE and all locally applicable

standards

aÖNORM, EN, ÖVGW-TR Gas,

ÖVGW-TRF and ÖVE

cSEV, SUVA, SVGW, SVTI,

SWKI, VKF and EKAS guideline

1942: LPG, part 2

If you smell gas

Danger

Escaping gas can lead to explo-

sions which may result in serious

injury.

■ Do not smoke. Prevent naked

flames and sparks. Do not

switch lights or electrical appli-

ances on or off.

■ Close the gas shut-off valve.

■ Open windows and doors.

■ Evacuate any people from the

danger zone.

■ Notify your gas or electricity

supplier and your local heating

contractor from outside the

building.

■ Shut off the electricity supply to

the building from a safe place

(outside the building).

Safety instructions

5585 174 GB

If you smell flue gas

Danger

Flue gas can lead to life threat-

ening poisoning.

■ Shut down the heating system.

■ Ventilate the installation site.

■ Close all doors in the living

space.

Flue systems and combustion air

Ensure that flue systems are clear and

cannot be sealed, for instance due to

accumulation of condensate or other

causes. Ensure a sufficient supply of

combustion air.

Instruct system users that subsequent

modifications to the building characteris-

tics are not permissible (e.g. cable/pipe-

work routing, cladding or partitions).

Danger

Leaking or blocked flue systems,

or an insufficient supply of com-

bustion air can cause life threat-

ening poisoning from carbon

monoxide in the flue gas.

Ensure the flue system is in

proper working order. Apertures

for supplying combustion air

must be non-closable.

Extractors

Operating appliances that extract air to

the outside (cooker hoods, extractors, air

conditioning units, etc.) can create neg-

ative pressure. If the boiler is operated at

the same time, this can lead to reverse

flow of the flue gas.

Danger

The simultaneous operation of

the boiler and appliances that

extract air to the outside can

result in life threatening poison-

ing due to reverse flow of the flue

gas.

Fit an interlock circuit or take suit-

able steps to ensure a sufficient

supply of combustion air.

Working on the system

■ Where gas is used as the fuel, close

the main gas shut-off valve and safe-

guard it against unintentional reopen-

ing.

■ Isolate the system from the power sup-

ply (e.g. by removing the separate fuse

or by means of a mains isolator) and

check that it is no longer 'live'.

■ Safeguard the system against recon-

nection.

Danger

Hot surfaces can cause burns.

■ Before maintenance or service

work, switch OFF the appli-

ance and let it cool down.

■ Never touch hot surfaces on

the boiler, burner, flue system

or pipework.

!Please note

Electronic assemblies can be

damaged by electrostatic dis-

charge.

Before beginning work, touch

earthed objects, such as heating

or water pipes, to discharge static

loads.

Safety instructions

Safety instructions (cont.)

5585 174 GB

Repair work

!Please note

Repairing components that fulfil a

safety function can compromise

the safe operation of the sys-

tem.

Faulty components must be

replaced with original Viessmann

spare parts.

Auxiliary components, spare and

wearing parts

!Please note

Spare and wearing parts that

have not been tested together

with the system can compromise

its function. Installing non-author-

ised components and making

non-approved modifications or

conversions can compromise

safety and may invalidate the

warranty.

For replacements, use only orig-

inal spare parts supplied or

approved by Viessmann.

Safety instructions

Safety instructions (cont.)

5585 174 GB

Service instructions

Product information

Intended use......................................................................................................... 7

Product information.............................................................................................. 7

Installation instructions

Preparing for installation................................................................................... 8

Installation sequence

Mounting the boiler and making connections....................................................... 10

Connection on the heating water side.................................................................. 12

Flue gas connection............................................................................................. 12

Condensate connection........................................................................................ 13

Gas connection.................................................................................................... 14

Opening the control unit enclosure....................................................................... 14

Electrical connections........................................................................................... 16

Closing the control unit enclosure and inserting the programming unit............... 26

Service instructions

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance.......................................... 28

Further details regarding the individual steps....................................................... 30

Code 1

Calling up coding level 1...................................................................................... 65

General/group "1"................................................................................................. 66

Boiler/group "2".................................................................................................... 69

DHW/group "3"..................................................................................................... 69

Solar/group "4"..................................................................................................... 70

Heating circuit 1, heating circuit 2, heating circuit 3/group "5"............................. 72

Code 2

Calling up coding level 2...................................................................................... 79

General/group "1"................................................................................................. 80

Boiler/group "2".................................................................................................... 89

DHW/group "3"..................................................................................................... 91

Solar/group "4"..................................................................................................... 93

Heating circuit 1, heating circuit 2, heating circuit 3/group "5"............................. 97

Diagnosis and service scans

Service level......................................................................................................... 106

Diagnosis.............................................................................................................. 107

Index

5585 174 GB

Checking outputs (relay test)................................................................................ 113

Troubleshooting

Fault display......................................................................................................... 115

Fault codes........................................................................................................... 117

Maintenance......................................................................................................... 135

Function description

Constant temperature control unit........................................................................ 143

Weather-compensated control unit...................................................................... 144

Internal extensions (accessories)......................................................................... 145

External extensions (accessories)........................................................................ 148

Control functions.................................................................................................. 152

Assigning heating circuits to the remote control................................................... 160

Electronic combustion control unit........................................................................ 160

Designs

Connection and wiring diagram – internal connections ....................................... 162

Connection and wiring diagram – external connections....................................... 164

Parts lists

Ordering parts...................................................................................................... 166

Overview of the assemblies................................................................................. 167

Casing assembly.................................................................................................. 168

Heat cell assembly............................................................................................... 170

Burner assembly.................................................................................................. 172

Hydraulic assembly.............................................................................................. 174

Control unit assembly........................................................................................... 176

Miscellaneous assembly...................................................................................... 178

Commissioning/service reports

............................................................................................................................. 179

Specification....................................................................................................... 180

Certificates

Declaration of conformity...................................................................................... 181

Manufacturer's certificate according to the 1st BImSchV [Germany]................... 181

Keyword index.................................................................................................... 182

Index

Index (cont.)

5585 174 GB

The appliance is only intended to be

installed and operated in sealed unven-

ted heating systems that comply with

EN 12828, with due attention paid to the

associated installation, service and

operating instructions. It is only designed

for the heating of water that is of potable

water quality.

Intended usage presupposes that a fixed

installation in conjunction with permissi-

ble, system-specific components has

been carried out.

Commercial or industrial usage for a pur-

pose other than heating the building or

DHW does not comply with regulations.

Any usage beyond this must be

approved by the manufacturer for the

individual case.

Incorrect usage or operation of the appli-

ance (e.g. the appliance being opened

by the system user) is prohibited and

results in an exclusion of liability. Incor-

rect usage also occurs if the components

in the heating system are modified from

their intended function (e.g. if the flue

gas and ventilation air paths are

sealed).

Product information

Vitodens 200-W, type B2HA

Preset for operation with natural gas E

and natural gas LL.

For conversion to LPG P (without con-

version kit), see the service instruc-

tions.

In principle the Vitodens 200-W may

only be delivered to countries listed on

the type plate. For deliveries to alterna-

tive countries, approved contractors

must arrange individual approval on their

own initiative and in accordance with the

law of the country in question.

Multi boiler system

For the installation of a multi boiler sys-

tem observe the installation instructions

for the multi boiler system accessories.

Product information

Intended use

5585 174 GB

Service

!Please note

To prevent appliance damage,

connect all pipework free of load

and torque stress.

100160 160

752

1975

1690

850

380

480

875

1166

160

CB D F

200

AExpansion vessel G1

BSafety valve

CHeating flow G1½

DCylinder flow G1½

EGas connection R ¾

FCylinder return G1½

GHeating return G1½

HCable entry area at the back

KAccessories (connection sets)

Preparing for installation

5585 174 GB

LWithout connection sets (accesso-

ries)

MWith connection sets (accessories)

NRecommended dimension (single

boiler system)

ORecommended dimension (multi

boiler system)

PCondensate drain

Note

This boiler (IP rating: IP X4 D) is

approved for installation in wet rooms

inside safety zone 1 in accordance with

DIN VDE 0100, providing the occurrence

of hosed water can be ruled out.

Observe the requirements of

DIN VDE 0100.

1. Prepare the water connections. Thor-

oughly flush the heating system.

2. Prepare the gas connection accord-

ing to TRGI or TRF [or local regula-

tions].

3. Prepare the electrical connections.

■Power cable: NYM-J 3 x 1.5 mm2,

max. fuse rating 16 A, 230 V~.

■ Accessory cables: NYM with the

required number of cores for exter-

nal connections.

■Allow all cables in area "H" to pro-

trude 1200 mm from the wall.

Preparing for installation

Preparing for installation (cont.)

5585 174 GB

Installation

Fitting the wall mounting bracket

Note

The enclosed screws and rawl plugs are

only suitable for concrete. For other con-

struction materials, use fixing materials

that are suitable for 100 kg loads.

422

480

1975

Ø 10

AReference point: boiler top edge

BInstallation template (included with

the boiler)

CTop edge finished floor

DRecommendation

Installation sequence

Mounting the boiler and making connections

5585 174 GB

Autres manuels pour Vitodens 200-W System

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Viessmann Chaudière

Viessmann

Viessmann VITOCELL 300B Manuel utilisateur

Viessmann

Viessmann VITOLIGNO 300-P Mode d'emploi

Viessmann

Viessmann VITOPEND 222 WHSA Manuel utilisateur

Viessmann

Viessmann VITODENS 050-W Manuel utilisateur

Viessmann

Viessmann Vitodens 100 Series Guide rapide

Viessmann

Viessmann Vitopend 100-W Guide rapide

Viessmann

Viessmann Vitorond 200 VD2 320 Mode d'emploi

Viessmann

Viessmann VITROND 200 Manuel utilisateur

Viessmann

Viessmann Vitoligno 300-H Mode d'emploi

Viessmann

Viessmann VITOGAS 050 Manuel d'instructions

Viessmann

Viessmann Vitodens 222-F B2TA series Guide rapide

Viessmann

Viessmann Vitorond 100 Guide rapide

Viessmann

Viessmann VITOCROSSAL 200 Manuel utilisateur

Viessmann

Viessmann Vitotronic 300 KW3 Manuel utilisateur

Viessmann

Viessmann VR2 Series Manuel utilisateur

Viessmann

Viessmann B2HAH13 Manuel utilisateur

Viessmann

Viessmann VITODENS Guide de démarrage rapide

Viessmann

Viessmann Vitocrossal 100 Manuel utilisateur

Viessmann

Viessmann Vitoflex 300-RF 150 Guide d'installation et d'utilisation

Viessmann

Viessmann VITOGAS 100 Manuel d'instructions

Viessmann

Viessmann VITOROND 200 VD2A-125 Manuel utilisateur

Viessmann

Viessmann Vitocrossal CRU 800 Mode d'emploi

Viessmann

Viessmann Vitodens 100-W Manuel utilisateur

Viessmann

Viessmann Vitoflex RF 150 Guide rapide

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur

Radiant

Radiant R2K 55 Manuel