VIA Technologies PT-TVBT Manuel utilisateur

PT-TVBT

PT-TVBT2

VIA 693 SOCKET 370

AT MAINBOARD

USER’S MANUAL

V 1.X

DOC NUMBER: UM-TVBT-E2 ...............................................................PRINTED IN TAIWAN

VIA 693 Socket 370 AT Mainboard TABLE OF CONTENTS

TABLE OF CONTENTS

Chapter & Section Page

1. INTRODUCTION ...............................................................................1-1

1.1 OVERVIEW............................................................................................... 1-1

1.2 MAINBOARD LAYOUT ........................................................................ 1-2

1.3 SPECIFICATIONS ................................................................................... 1-3

2. INSTALLATION ................................................................................2-1

2.1 UNPACKING............................................................................................. 2-1

2.2 HOW TO POWER ON THE PC SYSTEM............................................ 2-1

2.3 POWER OFF THE PC SYSTEM........................................................... 2-3

3. HARDWARE SETUP.........................................................................3-1

3.1 INSTALLATION OF CPU....................................................................... 3-1

3.2 INSTALL THE DRAM MODULES ....................................................... 3-2

3.3 CONNECTORS ......................................................................................... 3-3

3.4 JUMPERS .................................................................................................. 3-16

3.5 INSTALLATION OF DEVICE DRIVER .............................................. 3-21

4. AWARD BIOS SETUP ......................................................................4-1

4.1 GETTING STARTED............................................................................... 4-1

4.2 MAIN MENU............................................................................................. 4-2

4.3 CONTROL KEYS ..................................................................................... 4-2

4.4 STANDARD CMOS SETUP .................................................................... 4-3

4.5 BIOS FEATURES SETUP ....................................................................... 4-3

4.6 CHIPSET FEATURES SETUP ............................................................... 4-7

4.7 POWER MANAGEMENT SETUP......................................................... 4-11

4.8 PNP/PCI CONFIGURATION ................................................................. 4-15

4.9 INTEGRATED PERIPHERALS............................................................. 4-18

4.10 LOAD SETUP DEFAULTS ................................................................. 4-20

4.11 SUPERVISOR PASSWORD / USER PASSWORD .......................... 4-21

4.12 IDE HDD AUTO DETECTION .......................................................... 4-23

4.13 SAVE & EXIT SETUP / EXIT WITHOUT SAVING....................... 4-24

VIA 693 Socket 370 AT Mainboard

SOMETHING IMPORTANT !

¶TRADEMARKS

All trademarks used in this manual are the property of their respective owners.

¶LOAD SETUP DEFAULTS

“LOAD SETUP DEFAULTS” is the function which will have the BIOS default

settings loaded into the CMOS memory, these default settings are the best-case

values that should optimize system performance and increase system stability .This

function will be necessitated when you receive this mainboard, or when the system

CMOS data is corrupted. Please refer to the Section 4-10 for the details.

¶DISCHARAGE CMOS DATA

Whenever you want to discharge the CMOS data or open the system chassis, Make

sure to disconnect the AC power first because there is always the 5V standby voltage

connected to this mainboard when using an ATX switching power supply. Without

disconnecting the AC power connector from the PC system, the mainboard may be

damaged by any improper action.

¶WAKE ON LAN

In order to support the Wake On LAN feature, the system requires a ATX type SPS

(switching power supply), Such power supply must be able to provide at least 800

mA of driving capability on the “5V standby” voltage.

¶WARNING !

The "Static Electricity" may cause damage to the components on the mainboard, In

order to avoid the damage to the mainboard accidentally, please discharge all static

electricity from your body before touching this mainboard.

¶NOTICE

Information presented in this manual has been carefully checked for reliability;

however, no responsibility is assumed for inaccuracies. The information contained in

this manual is subject to change without notice.

VIA 693 Socket 370 AT Mainboard INTRODUCTION

1-1

1. INTRODUCTION

1.1 OVERVIEW

This Mainboard is a high performance personal computer mainboard. It is the AT

form-factor with Socket 370 on the board for socket type Celeron™ Processors.

VIA 693 and 596 chipsets are chosen as the system core logic to give the most

outstanding performance and reliability. It is designed for 300, 333, 350, 366, 400,

433, 450, 466, 500, 550MHz and higher speed socket type Celeron™ processors.

The chipset installed on this mainboard will be either VIA 693 with 596A or VIA

693 with 596B chipsets. The difference between these two chipset are shown in

the following table:

CHIPSET ULTRA DMA MODE

VIA 693 with 596A chipset Ultra DMA33

VIA 693 with 596B chipset Ultra DMA66

This mainboard has two channels of “PIO” and “Ultra DMA33 ( or Ultra DMA66)

Bus Master” mode PCI IDE ports built on the mainboard to support the most

updated IDE devices. One Floppy Disk controller interface, two high speed Serial

ports (UARTs), one multi-mode Parallel port, one PS/2™ mouse port, one IR

interface and two USB ports are designed on the board for wide variety of

peripheral connection.

The ESS Solo-1 (ES1938S) PCI sound chip is designed on board (ESS sound chip

is optional on the board). 3-D stereo effects processor, 16-bit stereo wave ADC

and DAC, 16-bit stereo music DAC, MPV-401 UART mode serial port dual game

port and ESFMämusic synthesizer is built in the ES1938S audio chipset. When

you find the ES1938S sound interface (CN18) installed on the mainboard, you

don't have to purchase another sound card because there is the 3D audio interface

on your mainboard.

The Celeron™ are the 32-bit processors with RISC technology, which offers

several key features such as built-in L2 cache, 12-stage super-pipeline

architecture, out of order execution … etc. In order to optimize of its capabilities

and performances, the 32-bit Operating System (such as Windows® and OS/2™)

and 32-bit applications are recommended.

VIA 693 Socket 370 AT Mainboard INTRODUCTION

1-2

1.2 MAINBOARD LAYOUT

CPU

CN1

AT K/B

CN5 LPT

COM2COM1

CN14 AT POWER

CN18 GAME/AUDIO

SYS. BIOS

CN8 FDC

CN9 IDE 1

CN10 IDE 2

PCI 3

PCI 2

PCI 1

AGP

ISA SLOT

DIMM 2

DIMM 1

CN15 ATX POWER

BAT1

CN21 CD-IN

CN6 USB1

CN7 USB2

CN16 WOL

CN2

SPK

PWR-LED S

CN22 AUDIO IN

CN12 IR

JP6

CN13

FAN 2

ISA SLOT

JP5

JP3

ES1938S

Solo 1

NS PC87309

JP4

CN17

FAN 1

VIA 693 Socket 370 AT Mainboard INTRODUCTION

1-3

1.3 SPECIFICATIONS

¥CPU

Intel® Celeron™ 300, 333. 350, 366, 400, 433, 450, 466, 500MHz and higher

speed Socket 370 processors

¥CPU VCC

Three sets Voltage Regulator circuits on board, supports +1.30V DC through

+2.05V DC CPU Core Voltage and all lower-voltage components.

Note : The CPU Core Voltage will be Detected and adjusted automatically by the

VID-pin on the CPU, so there is no manual-adjustment required to select the CPU

voltage. Simply plug in the CPU and start immediately.

¥WORD SIZE

Data Path : 8-bit, 16-bit, 32-bit, 64-bit

Address Path : 32-bit

¥PC SYSTEM CHIPSET

VIA693 with 596A chipset or VIA 693 with 596B chipset.

¥SUPER I/O CHIPSET

NS PC87309 I/O chip

¥FRONT SIDE BUS FREQUENCY

66 MHz and 100MHz selectable.

¥MEMORY

Two 168-pin DIMM sockets onboard, Maximum memory size can be up to 512

MB with ECC checking. Supports 3.3V SDRAM DIMM module,

Cache memory: 128KB pipelined burst SRAM in Celeron™ processor.

¥BIOS

AWARD Plug & Play System BIOS, supports ACPI, DMI and Green functions.

VIA 693 Socket 370 AT Mainboard INTRODUCTION

1-4

¥EXPANSION SLOTS

AGP Slots : 32-bit x 1 (Supports 1x or 2x AGP graphics cards)

PCI Slots : 32-bit x 3 (All master / Slave, PCI 2.1 compliant)

ISA Slots : 16-bit x 2 (One of the slot is PCI/ISA shared)

¥WOL PORTS (active only with ATX power supply)

One WOL connector supports Wake-On-LAN (WOL up-designed)

¥USB PORTS

Two Universal Serial Bus (USB) ports.

¥IDE PORTS

Two channels of Ultra UDMA/33 or Ultra DMA/66 Bus Master IDE ports. It will

support up to 4 IDE devices like IDE hard disk, ATAPI CD-ROM and LS-120/ZIP-

100 devices. The IDE ports can be programmed to support PIO Mode 4, DMA

mode 2 and Ultra DMA/33 or Ultra DMA/66

¥SUPER I/O PORTS

1. Two high speed NS16C550 compatible serial ports (UARTs).

2. One parallel port, supports SPP/EPP/ECP mode.

3. One Floppy Disk Control port.

¥IR PORT

One HPSIR and ASKIR compatible IR transmission connector (5-pin).

¥MOUSE AND KEYBOARD

One PS/2™ mouse connector and one AT type keyboard connector.

¥3D AUDIO INTERFACE ( optional)

ESS Solo-1(ES1938S) PCI sound chip on board, built-in 3D stereo effects

processor, 16-bit stereo wave ADC and DAC, 16-bit stereo music DAC, MPU-401

UART mode serial port, dual game port, ESFMämusic synthesizer.

VIA 693 Socket 370 AT Mainboard INTRODUCTION

1-5

¥HARDWARE MONITORING (optional)

Winbond W83783S (U5) is designed on the board to monitor hardware healthy

status such as system voltage, system temperature, and cooling fans. When the CPU

temperature is too high, the system board to give a series of beeping alarm or

display the warning message on the screen so that you can take proper action to

prevent your system from damage. When you hear the beeping alarm or the warning

message on the screen, be sure to turn the power off and open the chassis

immediately, check on the appropriate component on the mainboard (especially the

CPU cooling fan ) to see whether it is working properly or not. If you don’t know

how to handle it, please ask for the technical support from your dealer.

This mainboard provides the hardware monitoring program so that you can monitor

the healthy status of your PC system. When you find there is the Winbond

W83783S installed on the board, you can run the hardware monitoring program in

the CD (the hardware monitoring program is in the "Driver" sub-directory.) and

then the hardware monitoring feature will inform you the system status all the time.

¥ACPI (Active only with ATX power supply)

Advanced Configuration and Power Interface (ACPI) function is a new feature and

it will let you have many amazing benefits. With the ACPI feature your PC system

will becomes very friendly and convenient. When you have the ATX power supply

connected to the mainboard, you will have the following features:

1. On Now: power on the system by panel-switch, Modem ring-in, and LAN signal.

2. Power off (soft-off) by OS or Panel-switch.

3. Resuming of PC system. (such as Modem ring-in, RTC alarm, .... etc.)

¥DIMENSION

1. Width & Length : 220 mm x 220 mm.

2. Height : 2 1/2 inches with CPU Retention Mechanism.

3. PCB Thickness : 4 layers, 0.05 inches normal.

4. Weight : 18 ounces.

¥ENVIRONMENT LIMIT

1. Operating Temperature : 10to 40. (50to 104)

2. Required Airflow : 50 linear feet per minute across CPU.

3. Storage Temperature : - 40to 70. (- 40to 158)

4. Humidity : 0 to 90% non-condensing.

5. Altitude : 0 to 10,000 feet.

VIA 693 Socket 370 AT Mainboard INSTALLATION

2-1

2. INSTALLATION

2.1 UNPACKING

The mainboard contains the following components in the package. Please inspect the

following contents and confirm that everything is there in the package. If anything is

missing or damaged, call your supplier for instructions before proceeding.

lThis mainboard.

lOne USER‘S MANUAL.

lOne Cable set for IDE and I/O devices.

lOne CD diskette for device drivers and utility programs.

This mainboard contains electrostatic sensitive components and it can be easily

damaged by static electricity. So please leave it sealed in the original packing until

when installing the mainboard in the PC system.

A grounded anti-static mat is recommended when unpacking and installation. Please

also attached an anti static wristband to your wrist and have it grounded to the same

point as the anti-static mat. After the opening of the mainboard carton, please observe

the mainboard carefully to make sure there is no shipping and handling damage before

you can start to install the PC system.

2.2 HOW TO POWER ON THE PC SYSTEM

When this mainboard has been installed successfully and the ATX type power

supply is used to connect to the mainboard, there are several ways to power on the

system. Please read the following description for all the details.

POWER BUTTON (PW SWITCH)

When there is the ATX type power supply connected to the mainboard, the power

button on the front panel can be programmed by the BIOS setup program and it will

have different features. The power button can be used as a power button or suspend

switch according to the selection in the system BIOS. The PW switch can also be

used as suspend switch when the ACPI function is selected when installing

Windows 98. Please refer to page 3-14 for detail function description.

VIA 693 Socket 370 AT Mainboard INSTALLATION

2-2

¨RTC ALARM (optional, active only with ATX type power supply)

PC system can be waked up by the RTC setting in the CMOS. You can set the

alarming date and time in the RTC memory, When RTC alarms, the PC system will

be triggered and wakes up automatically.

Enable the “Resume by Alarm” selection in the BIOS setup utility, and then input

the accurate date and time in following fields. (the “RTC Alarm Resume” is

included in the “POWER MANAGEMENT SETUP”, please refer to Section 4.7),

Having stored the RTC alarm setting, the PC system will be turned on automatically

according to the date and time which is recorded in the CMOS memory.

Same as the above, you have to reboot the PC system and wait for the POST (Power

On Self Test) is completed to enable the RTC alarm.

¨MODEM RING-IN (optional, active only with ATX type power supply)

This mainboard can be triggered by a modem ring-in signal. When you have an

external modem installed, you can use it to power on the PC system. When there is

the incoming message from the external modem, the PC system will be triggered by

the ring-in signal and wake up automatically to receive the message for you.

In order to use the ring-in signal to wake up your PC system, you will have to use

the EXTERNAL MODEM and have it connected to one of the Serial Ports (COM1

or COM2). When the system power is off, this mainboard will continue to detect the

serial port status. When it detects the ring-in signal from the serial port, the system

power will be turned on and start to receive the incoming messages automatically.

To enable the Modem Ring-In feature, you have to run the BIOS setup utility and

enable the “Modem or LAN resume” option (it is in the “POWER MANAGEMENT

SETUP”, please refer to Section 4.7 for the settings). Having completed the BIOS

setup, you have to reboot the PC system so that BIOS can verify the setting. (the

“DMI pool data” will be verified by the BIOS when loading the operating system).

Simply speaking, shut down the PC system and then re-start the system. The modem

ring-in feature will be enabled when the operation system has been loaded.

Note: This function is not available when using the internal MODEM card.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels VIA Technologies Carte mère

VIA Technologies

VIA Technologies EPIA-EN12000EG - VIA Motherboard - Mini ITX Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-EN12000EG - VIA Motherboard - Mini ITX Manuel utilisateur

VIA Technologies

VIA Technologies VX900 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P820 Manuel utilisateur

VIA Technologies

VIA Technologies Board Manuel utilisateur

VIA Technologies

VIA Technologies VIA KT266A ChipsetMotherboard Manuel utilisateur

VIA Technologies

VIA Technologies VAB-950 Manuel utilisateur

VIA Technologies

VIA Technologies VB7007 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P830 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-950 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P900 Manuel utilisateur

VIA Technologies

VIA Technologies Mini-ITX Mainboard EPIA-MII Manuel utilisateur

VIA Technologies

VIA Technologies P4M266A Manuel utilisateur

VIA Technologies

VIA Technologies A7F129 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA SN-Series Manuel utilisateur

VIA Technologies

VIA Technologies NAB-7500 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-820 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M830 Manuel utilisateur

VIA Technologies

VIA Technologies ARTIGO A2000 - VIA ARTiGO Barebone Storage... Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M700 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-800 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-820 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-CL Manuel utilisateur

VIA Technologies

VIA Technologies VT82C694X Pro Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur