Vertiv Liebert GXTRT-1000IRT2UXL Manuel utilisateur

LIEBERT® GXT RT+ UPS

I, 230V, 1,000 - 3,000 VA

Quick Installation Guide

SL-28301_REV0_11-19 1

I M P O R TA N T: Before installing,

connecting to supply or operating

your Liebert GXT RT+ UPS, please

review the Safety and Regulatory

Statements sheet. For detailed

installation, operating, maintenance

and troubleshooting information

refer to the GXT RT+ User Guide for

your model available at

www.Vertiv.com.

Thank you for your recent purchase of a Vertiv UPS! We appreciate your

business and are condent that your new product will provide many years

of uninterruptible power to your connected equipment. With this

purchase, you may also want to consider Vertiv’s complete line-up of

Racks, PDU’s, Thermal Solutions, KVM Switches, and Serial Consoles.

Vertiv also oers a broad array of Services and Extended Warranties. If

you require any support, please don’t hesitate to reach out to Vertiv or

one of our Resellers or Local Rep Firms. We stand ready to support you.

We sincerely hope that you’ll continue to select Vertiv for all of your future

infrastructure needs!

The Vertiv Team

MODEL DESIGN CONFIGURATIONS

GXT RT+ UPS

#Description

1AC Input

2Input circuit breaker

3USB communication port

4RS-232 communication port

5SNMP intelligent slot (option)

6External battery connection

7Output receptacles

GXTRT-1000IRT2UXL GXTRT-1500IRT2UXL

GXTRT-2000IRT2UXL

GXTRT-3000IRT2UXL

LIEBERT® GXT RT+ UPS 230V 1,000 - 3,000 VA

Quick Installation Guide

2 SL-28301_REV0_11-19

INSTALLATION

1. Inspecting the UPS

Inspect the UPS for any signs of

obvious damage. If damage is

visible, do not proceed and call

our warranty support line for

assistance at 0080011554499

(Toll free), +39 02 98250222

(Toll), or email at eoc@vertiv.

com

2. Choosing a location

Install the UPS in a temperature-

controlled environment that is

free of corrosive and conductive

contaminants. Avoid locations

near heat or water sources and

exposed to direct sunlight.

For proper ventilation, leave 100

mm clearance on all sides of

the

UPS.

The input outlet should be

nearby and easily accessible.

3. Installing the UPS

The UPS and optional External

Battery Cabinets may be installed

in either a tower or rack

conguration.

• For tower installation, assemble

and attach the tower support

stands and spacers.

• For rack installation:

1. Attach the handles to the

UPS.

2. Install the rail kit in the rack.

NOTE: Align shelf of rack kit

with rack U number for proper

alignment.

3. Install the UPS in the rack.

4. Secure the handles to the

rack.

• After UPS installation, install

internal batteries shipped in

separate box.

CONNECTIONS

4. Connecting External

Battery Cabinet (Optional)

External Battery Cabinets (EBC)

provide longer battery run-time

for connected devices. Refer to

GXT RT+ User Guide to select

the appropriate model and

quantity for your GXT RT+ model

and applications.

• Verify that the EBC breaker is

in the “O” position.

• Connect one end of the

supplied EBC cable to the UPS

and one end to the battery

cabinet. If connecting more

than one external battery,

connect one end of the

external battery cable to the

second connector on the

battery cabinet, then connect

the other end to the next

battery cabinet.

• Verify that the EBC breaker is

in the “On” position.

5. Connecting AC Input

The UPS is cord and plug

connected using an IEC 60320-1

input plug. Perform all wiring in

accordance to all local and

national electrical codes.

The UPS is equipped with output

receptacles. Connect the

equipment to be protected to

the output receptacles.

NOTE: Allow the batteries to charge

at-least 5 hours before rst start-up

to ensure adequate back-up time.

The batteries charge when the UPS

is connected to AC input regardless

of the o/on status of the UPS.

WIRING

Model Recommended External Breaker

GXTRT-1000IRT2UXL

GXTRT-1500IRT2UXL

GXTRT-2000IRT2UXL

10 A

GXTRT-3000IRT2UXL 20 A

LIEBERT® GXT RT+ UPS 230V 1,000 - 3,000 VA

Quick Installation Guide

SL-28301_REV0_11-19 3

Operation and Display Panel

POWERING THE UPS

NOTE: Do not start the UPS until

the installation is nished, the

system is commissioned by an

authorized engineer, and the

external input circuit breakers are

closed.

1. Make sure the breaker supplying

power to the UPS is closed, and

close the input breaker on the

rear of the UPS.

2. If necessary, use the LCD display

to make any required settings.

(Refer to the User Guide for

conguration set up.)

3. Close all output breakers on the

rear of the UPS (or in an external

panel board, if used).

4. If external battery cabinets are

included, close the breakers on

the rear of each cabinet.

5. Power-on the UPS using the

Operation and Display Panel by

pressing and holding the power

button.

NOTE:During operation, the UPS

may sound an alarm as the output

receptacles are powered. You may

press the power/mute button for 5

seconds to silence the audible alarm.

To contact Vertiv Technical Support: visit www.Vertiv.com

trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness here, Vertiv Group Corp.

assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specications, rebates and other promotional

oers are subject to change at Vertiv’s sole discretion upon notice.

4 SL-28301_REV0_11-19

Ce manuel convient aux modèles suivants

Autres manuels Vertiv UPS

Vertiv

Vertiv 10H92873 Manuel utilisateur

Vertiv

Vertiv Liebert PSI XR 1000 Manuel utilisateur

Vertiv

Vertiv Liebert GXT5-750IRT2UXL Instructions d'installation et d'entretien

Vertiv

Vertiv LIEBERT NXC 60KVA Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert EXM Manuel utilisateur

Vertiv

Vertiv NetSure +24V Battery Tray Kit Manuel utilisateur

Vertiv

Vertiv Liebert GXT5 Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert GXT5 Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert EXL Manuel utilisateur

Vertiv

Vertiv Liebert GXT5-500LVRT2UXLN Instructions d'installation et d'entretien

Vertiv

Vertiv Liebert ITA2 Manuel utilisateur

Vertiv

Vertiv Liebert EXM Manuel utilisateur

Vertiv

Vertiv Liebert NX 225 kVA Manuel utilisateur

Vertiv

Vertiv Liebert GXT5 Manuel utilisateur

Vertiv

Vertiv Liebert ITA2 1-3kVA Manuel utilisateur

Vertiv

Vertiv Liebert GXT MT+ EX 1-3 kVA Manuel utilisateur

Vertiv

Vertiv LIEBERT EXS 208/220-V 30 KVA Manuel utilisateur

Vertiv

Vertiv Liebert APM 300 Manuel utilisateur

Vertiv

Vertiv Liebert EXS 0030kTH16FN01000 Manuel utilisateur

Vertiv

Vertiv LIEBERT PSI5 Series Manuel utilisateur

Vertiv

Vertiv Liebert GXT5 Manuel utilisateur

Vertiv

Vertiv Liebert NXL 500kVA Manuel utilisateur

Vertiv

Vertiv Liebert PST5 Series Manuel utilisateur

Vertiv

Vertiv NetSure 48 Series Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur