Vertiv MPUIQ-VMCHS Manuel utilisateur

MPUIQ-VMCHS ModUle

Quick Installation Guide

590-1543-501A 1

The MPUIQ-VMCHS module is

designed to drastically reduce

cable bulk. Use your MPUIQ-

VMCHS module to convert

keyboard, monitor and mouse

signals from a server through a

single user-supplied CAT5 cable

(4-pair, up to 150 ft/45 m) to your

switch.

The MPUIQ-VMCHS module draws

its power from the server and has

Keep Alive functionality that will

keep your server working properly

with or without connectivity to the

Avocent® MergePoint Unity™

switch.

Troubleshooting tip

Make sure your server is turned

on before operating your Merge-

Point Unity™ switching system.

If a server is unavailable through

the MergePoint Unity™ local port

user interface, then double-check

your module connection or test

another MPUIQ-VMCHS module in

its place.

1. Connecting the MPUIQ-

VMCHS module to your

unit

Choose an available port on the

rear of your switch. Plug one

end of a user-supplied CAT5

cable into a numbered port and

the other end into the RJ45

connector of the MPUIQ-

VMCHS module.

2. Connecting a server to

the MPUIQ-VMCHS

module

Plug the MPUIQ-VMCHS

module, VGA monitor and USB

connectors into the appropriate

server ports. Repeat this step

for all servers that are to be

connected to the MergePoint

Unity™switch.

3. Turning on your system

Turn on your servers and

MergePoint Unity™switch.

Ensure that your switch is

properly configured and begin

operation of your system.

Avocent® MergePoint Unity™ 8032 Switch Shown

MPUIQ-VMCHS module

Server

To contact Vertiv Technical Support: visit VertivCo.com

or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and

disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.

MPUIQ-VMCHS ModUle

Quick Installation Guide

2590-1543-501A

USA Notification

Warning: Changes or

modifications to this unit not

expressly approved by the party

responsible for compliance could

void the user’s authority to operate

the equipment.

nOTE: This equipment has been

tested and found to comply with

the limits for a Class A digital

device, pursuant to Part 15 of the

FCC Rules. These limits are

designed to provide reasonable

protection against harmful

interference when the equipment

is operated in a commercial

environment. This equipment

generates, uses and can radiate

radio frequency energy and, if not

installed and used in accordance

with the instruction manual, may

cause harmful interference to radio

communications. Operation of this

equipment in a residential area is

likely to cause harmful interference

in which case the user will be

required to correct the interference

at his own expense.

Canadian Notification

This Class A digital apparatus

complies with the Canadian

ICES-003.

Cet appareil numérique de la classe

A est conforme à la norme

NMB-003 du Canada.

Japanese Notification

Korean Notification

European Union

Warning: This is a class A

product. In a domestic environment

this product may cause radio

interference in which case the user

may be required to take adequate

measures.

Safety, EMC and

Environmental Approvals

and Markings

Safety certifications and EMC

certifications for this product are

obtained under one or more of the

following designations: CMN

(Certification Model Number), MPN

(Manufacturer’s Part Number) or

Sales Level Model designation.

Designations that are referenced in

the EMC and/or safety reports and

certificates are printed on the label

applied to this product.

For use with Listed Information

Technology Equipment (I.T.E.).

KCC-REM-AVO-CMN1005-014

AVOCENT CORP.

RIP/CMN:1005-014

Table des matières

Autres manuels Vertiv Unité de contrôle

Vertiv

Vertiv LIEBERT MPX PEM Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

Vertiv

Vertiv Liebert MBSM Manuel utilisateur

Vertiv

Vertiv R48-500 Manuel utilisateur

Vertiv

Vertiv NetSure Series Manuel utilisateur

Vertiv

Vertiv eSure R48-2000e3 Manuel utilisateur

Vertiv

Vertiv Liebert SmartAisle2 Manuel utilisateur

Vertiv

Vertiv Geist Manuel de la liste des pièces

Vertiv

Vertiv Liebert iCOM Instructions d'installation et d'entretien

Vertiv

Vertiv eSure S48-2000e3 Manuel utilisateur

Vertiv

Vertiv eSure R48-1000e3 Manuel utilisateur

Vertiv

Vertiv Liebert NXL Manuel utilisateur

Vertiv

Vertiv NetSure7100 Series Manuel utilisateur

Vertiv

Vertiv Liebert CW Instructions d'installation et d'entretien

Vertiv

Vertiv NetSure R48-2000 Manuel utilisateur

Vertiv

Vertiv eSure R48-3500e3 Manuel utilisateur

Vertiv

Vertiv LIEBERT RPC2 Manuel d'utilisation

Vertiv

Vertiv LIEBERT RPC2 Manuel utilisateur

Vertiv

Vertiv Net Sure SM-DU+ Manuel utilisateur

Vertiv

Vertiv NetSure M831A Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

Vertiv

Vertiv Liebert iCOM Instructions d'installation et d'entretien

Vertiv

Vertiv NetSure R24-3000 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur