Versitron FVT1000 Series Manuel utilisateur

VersiVision

FVT1000/FVR1000 Series

Fiber Optic Video Modems

Technical Manual

Also covers FVR1000M modules

VERSITRO , Inc.

83 Albe Drive / Suite C

ewark, DE 19702

www.versitron.com

PROPRIETARY DATA

All data in this manual is proprietary and may not be disclosed,

used or duplicated, for procurement or manufacturing purposes,

without prior written permission by

VERSITRO , Inc.

WARRA TY

All VER ITRON products are warranted against defects in materials and workmanship for one

year from date of delivery. We will repair or, at our option, replace parts, which during normal

usage prove to be defective during the warranty period provided that:

1. You call VER ITRON at (302) 894-0699 or (800) 537-2296 and obtain a Return Maintenance

Authorization (RMA) Number. Please reference your RMA number on the outside of the shipping

box.

2. hipping charges are pre-paid.

No other warranty is expressed or implied and we are not liable for consequential damages. For

repairs outside of the warranty period, the same procedure must be followed.

TABLE OF CO TE TS

SECTIO 1: GE ERAL DESCRIPTIO

INTRODUCTION…………………………………………………………………..4

DE CRIPTION OF EQUIPMENT…………………………………………………4

Functional Characteristics…………………………………………4

Physical Characteristics...................................................................5

PECIFICATION ………………………………………………………………5-6

SECTIO 2: I STALLATIO I STRUCTIO S

IN TALLATION PROCEDURE………………………………………………….7

SECTIO 3: TROUBLESHOOTI G

TROUBLE HOOTING…………………………………………………………8

LISTS A D ILLUSTRATIO S

FIGURE 1: FVT1003 and FVR1003……………………………………………5

FIGURE 2: P ACV1 Power upply……………………………………………7

FIGURE 3: FVT100x Connection Layout……………….……………………9

SECTIO 1

DESCRIPTIO OF EQUIPME T

I TRODUCTIO

This manual provides information on the installation and operation of the VersiVision

FVT1000/FVR1000 eries Fiber Optic Video Modems. ection 1 contains a general description of the

equipment. ection 2 contains installation instructions. ection 3 contains maintenance and

troubleshooting information.

Model

umber Description

FVT1003 Transmitter; 1-channel simplex video; Multimode; T; 3km standalone

FVT1004 Transmitter; 1-channel simplex video; Multimode; C; 3km standalone

FVT1005 Transmitter; 1-channel simplex video; inglemode; C; 30km standalone

FVR1003 Receiver; 1-channel simplex video; Multimode; T; 3km standalone

FVR1004 Receiver; 1-channel simplex video; Multimode; C; 3km standalone

FVR1005 Receiver; 1-channel simplex video; inglemode; C; 30km standalone

FVR1003M Receiver module; 1-channel simplex video;

Multimode; T; 3km; installed in Model FVC14 chassis

FVR1004M Receiver module; 1-channel simplex video;

inglemode; C; 3km; installed in Model FVC14 chassis

FVR1005M Receiver module; 1-channel simplex video;

inglemode; C; 30km; installed in Model FVC14 chassis

DESCRIPTIO OF EQUIPME T

Functional Characteristics

The VersiVision FVT1000/FVR1000 eries products are fiber optic video links designed to

extend a frequency modulation (FM) video signal over a single fiber optic cable. These modems provide

high quality transmission of one channel simplex video at distances to 3km using multimode fiber and

distances to 30km using singlemode fiber. A BNC connector provides the copper interface for the video

input/output. T and C optical connectors are standard for the fiber optic interface. The FVT1000 and

FVR1000 modems are completely compatible with the NT C, PAL, or ECAM video standards.

VER ITRON FVT1000 and FVR1000 eries Fiber Optic Video Modems utilize APC circuitry

while maintaining stable optical power output. The fiber optic link established between the transmitter

and receiver devices insures immunity from EMI, RFI, and ground loops. AD, Pelco, Phillips, and

Vicon communication protocols are supported. The modems’ plug and play design requires no user

adjustments. LED status indicators include video sync present (VIDEO) and power on (POWER).

Physical Characteristics

The VersiVision FVT1000 transmitter and FVR1000 receiver modems are available as standalone

devices for easy plug and play installation. In addition, the FVR1000 receiver modems can be ordered as

circuit card modules ( ee Chart Above) for installation in the Model FVC14 rack-mount chassis. The

14-slot chassis fits in a standard 19” rack and is offered with either 110VAC or 220VAC power

supplies. The dimensions of the FVT1000 and FVR1000 standalone devices are 7.5in (L) x 6.3in (W) x

1.2in (H).

FIGURE 1: FVT1003 and FVR1003

SPECIFICATIO S

VIDEO

Video Input: 1 volt pk-pk (75 ohms)

Bandwidth: 5 Hz – 8 MHz

Differential Gain: <3 %

Differential Phase: <3˚

Tilt: <2 %

ignal-to-Noise Ratio: 60dB

WAVELE GTH 1310nm inglemode

1310nm Multimode

UMBER OF FIBERS 1

CO ECTORS

Optical: T, C

Video: BNC

E VIRO ME TAL

MTBF >100,000 hours

Operating Temp: -30˚C to +50˚C

torage Temp: -40˚C to +85˚C

Relative Humidity: 0% to 95% (non condensing)

ize: 19 x 16 x 3.2 cm

7.5 x 6.3 x 1.2 in.

hipping Weight: <4.4kg

Construction: Aluminum

Finish: Black Paint

I DICATOR

Module

Green Video ync Present

Red Power On

OPTICAL POWER BUDGET

Transmitter Receiver

Fiber Wavelength

Model (s) Output Model ensitivity

Optical

Power

Budget

Max Distance

Multimode 1310nm FVT1003

FVT1004

-10dBm FVR1003

FVR1004

-30dBm 20dB 3km

inglemode 1310nm FVT1005 -10dBm FVR1005 -35dBm 25dB 30km

*Optical transmission distance is limited to optical loss of the fiber and additional loss caused by

connectors, splices, and patch panels.

CAUTIO !

The transmitter unit contains a light-emitting diode located in the optical connector. This device emits

invisible infrared electromagnetic radiation that can be harmful to human eyes. The radiation from this

optical connector, if viewed closely without any protection, may cause instantaneous damage to the retina

of the eye. Direct viewing of this LED should be avoided at all times.

SECTIO 2

I STALLATIO I STRUCTIO S

I STALLATIO PROCEDURE

The VersiVision FVT1000 eries transmitters and receivers are preset for immediate use. There are indicator

LEDs on the units for monitoring the real-time status of video, and power. The following instructions describe

the typical installation procedure and the function of the LED indicators located on each unit.

1. Connect the video source (camera) to the video input BNC connector on the FVT1000 transmitter unit

using coaxial cable.

2. Connect the video output BNC connector on the FVR1000 receiver unit to the video monitor using

coaxial cable.

3. Connect the fiber optic cable between the transmitter and receiver devices.

4. Apply power to both the transmitter and receiver using the P ACV1 power supplies provided.

Note: If using any of the FVR1000M modules, power is provided from the integral power supply of the

FVC14 chassis.

5. When the power is applied, the red POWER LED will light, indicating the presence of operating power.

The green VIDEO LED will give an indication as stated in the following page.

6. The link should now be operational.

FIGURE 2: PSACV1 Power Supply

I DICATOR LEDs

The stand-alone units have integral LEDs that are used to monitor the state of the unit. There are two video

LEDs and two power LEDs on the units.

TRA SMITTER and RECEIVER

Power: ON: (Red) indicates that correct power has been applied.

Transmitter:

Video: OFF: Indicates no video detected on input BNC connector

(No Video present on input BNC)

ON: Indicates video detected on input BNC connector

(Video present on input BNC connector)

Receiver:

Video: OFF: Indicates no video detected on output BNC connector

(No video present on output BNC)

ON: Indicates video detected on output BNC connector

(Video present on input BNC)

SECTIO 3

TROUBLESHOOTI G

OPTICAL FIBER

The VersiVision FVT1000 and FVR1000 eries fiber optic video modems are available for applications using

multimode or singlemode optical fibers. Please be certain that the correct size and type of fiber is being used for

the particular mode transmitter/receiver combination.

Also be certain that the attenuation and bandwidth of the fiber optic cable being used is within the range of the

system’s loss budget specifications.

GE ERAL

Any dirt or dust may easily pollute or block the fiber from accepting or radiating light. Therefore, please try to

keep the optical connector clear and always use the dust caps whenever the connector is exposed to air. It is

suggested that the tip of the optical connector should be carefully cleaned with a lint-free cloth moistened with

alcohol from time to time.

The status of any of the VIDEO LED should provide the first clue as to the origin of any operational failure. If

the VIDEO LED or the receiver unit is off, it usually means that the fiber is broken or has too much attenuation.

Next, be certain to check all connections and assure that inputs and outputs are not intermixed and transmitter

and receiver are not connected incorrectly.

Note: If the system is still not working after examining the above possibilities, please contact our Customer

ervice Department for further assistance.

FIGURE 3:

VersiVision FVT100x/FVR100x

Connection Layout

Ce manuel convient aux modèles suivants

Autres manuels Versitron Modem

Versitron

Versitron VersiVision FVR1000M Series Manuel utilisateur

Versitron

Versitron F2238 Manuel utilisateur

Versitron

Versitron F270XA Manuel utilisateur

Versitron

Versitron F242x Manuel utilisateur

Versitron

Versitron F270XAD Manuel utilisateur

Versitron

Versitron F282x Manuel utilisateur

Versitron

Versitron F2702 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur