Vents KRDP Series Manuel utilisateur

USER’S MANUAL

KRDP

Fire protection pressure control valve

KRDP

www.ventilation-system.com

CONTENTS

This user’s manual is a main operating document intended for technical, maintenance, and operating staﬀ.

The manual contains information about purpose, technical details, operating principle, design, and installation of the KRDP unit and all

its modiﬁcations.

Technical and maintenance staﬀ must have theoretical and practical training in the ﬁeld of ventilation systems and should be able to

work in accordance with workplace safety rules as well as construction norms and standards applicable in the territory of the country.

Safety requirements..................................................................................................................................................................... 2

Purpose................................................................................................................................................................................................ 3

Delivery set........................................................................................................................................................................................ 3

Designation key.............................................................................................................................................................................. 3

Technical data.................................................................................................................................................................................. 3

Unit design and operating principle................................................................................................................................. 5

Installation and set-up................................................................................................................................................................ 5

Technical maintenance.............................................................................................................................................................. 5

Storage and transportation regulations.......................................................................................................................... 5

Manufacturer’s warranty........................................................................................................................................................... 6

Certiﬁcate of acceptance.......................................................................................................................................................... 7

Seller information.......................................................................................................................................................................... 7

Installation certiﬁcate.................................................................................................................................................................. 7

Warranty card................................................................................................................................................................................... 7

SAFETY REQUIREMENTS

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS

SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED DOMESTIC WASTE

Follow general and special safety regulations during preparation for operation and operation of the valve.

Only persons who have studied the device and have been instructed in safety regulations are allowed to install and operate the valve.

www.ventilation-system.com

PURPOSE

DELIVERY SET

The valve is intended for use in ventilation and air conditioning systems in public and industrial buildings, in emergency smoke ventilation

systems to ensure evacuation of people from premises at the initial stage of a ﬁre.

The valve automatically opens at the required pressure diﬀerence (design pressure diﬀerence) to allow air to ﬂow freely from the space

where the air is pressurised (e.g. stairwell or elevator shaft) to the space where the pressure is lower (e.g. hall, room).

In case of a ﬁre, the dual action of the design features makes the valve a ﬁre protection valve with a ﬁre resistance rating of EIS 120.

NAME NUMBER

Valve 1 pc.

User’s manual 1 pc.

Packing box 1 pc.

DESIGNATION KEY

TECHNICAL DATA

Pressure control range [Pa] 20–150

Minimum air ﬂow rate [m/s] not less than 2

Operating temperature [˚C] –5...+40

Valve actuation temperature +72 ± 2

Designation example: KRDP  400x400 / 120  F2

Series

Fire protection pressure control valve

Width

200; 250; 300; 350; 400; 450; 500; 550; 600; 650; 700; 750; 800; 850; 900;

950; 1000; 1050; 1100; 1000

Height

200; 250; 300; 350; 400; 450; 500; 550; 600; 650; 700; 750; 800; 850; 900;

950; 1000; 1050; 1100; 1000

Fire resistance rating EI

120

Valve connection type (number of anges)

F1 – one ﬂange (wall type)

F2 – two ﬂanges (air duct type)

KRDP

www.ventilation-system.com

Cross-sectional area [m2]

А200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000

200 0,034 0,044 0,054 0,064 0,074 0,078 0,088 0,098 0,108 0,118 0,128 0,138 0,148 0,152 0,162 0,172 0,182

250 0,0425 0,055 0,0675 0,08 0,0925 0,0975 0,11 0,1225 0,135 0,1475 0,16 0,1725 0,185 0,19 0,2025 0,215 0,2275

300 0,051 0,066 0,081 0,096 0,111 0,117 0,132 0,147 0,162 0,177 0,192 0,207 0,222 0,228 0,243 0,258 0,273

350 0,0595 0,077 0,0945 0,112 0,1295 0,1365 0,154 0,1715 0,189 0,2065 0,224 0,2415 0,259 0,266 0,2835 0,301 0,3185

400 0,068 0,088 0,108 0,128 0,148 0,156 0,176 0,196 0,216 0,236 0,256 0,276 0,296 0,304 0,324 0,344 0,364

450 0,0765 0,099 0,1215 0,144 0,1665 0,1755 0,198 0,2205 0,243 0,2655 0,288 0,3105 0,333 0,342 0,3645 0,387 0,4095

500 0,085 0,11 0,135 0,16 0,185 0,195 0,22 0,245 0,27 0,295 0,32 0,345 0,37 0,38 0,405 0,43 0,455

550 0,0935 0,121 0,1485 0,176 0,2035 0,2145 0,242 0,2695 0,297 0,3245 0,352 0,3795 0,407 0,418 0,4455 0,473 0,5005

600 0,102 0,132 0,162 0,192 0,222 0,234 0,264 0,294 0,324 0,354 0,384 0,414 0,444 0,456 0,486 0,516 0,546

650 0,1105 0,143 0,1755 0,208 0,2405 0,2535 0,286 0,3185 0,351 0,3835 0,416 0,4485 0,481 0,494 0,5265 0,559 0,5915

700 0,119 0,154 0,189 0,224 0,259 0,273 0,308 0,343 0,378 0,413 0,448 0,483 0,518 0,532 0,567 0,602 0,637

750 0,1275 0,165 0,2025 0,24 0,2775 0,2925 0,33 0,3675 0,405 0,4425 0,48 0,5175 0,555 0,57 0,6075 0,645 0,6825

800 0,136 0,176 0,216 0,256 0,296 0,312 0,352 0,392 0,432 0,472 0,512 0,552 0,592 0,608 0,648 0,688 0,728

850 0,1445 0,187 0,2295 0,272 0,3145 0,3315 0,374 0,4165 0,459 0,5015 0,544 0,5865 0,629 0,646 0,6885 0,731 0,7735

900 0,153 0,198 0,243 0,288 0,333 0,351 0,396 0,441 0,486 0,531 0,576 0,621 0,666 0,684 0,729 0,774 0,819

950 0,1615 0,209 0,2565 0,304 0,3515 0,3705 0,418 0,4655 0,513 0,5605 0,608 0,6555 0,703 0,722 0,7695 0,817 0,8645

1000 0,17 0,22 0,27 0,32 0,37 0,39 0,44 0,49 0,54 0,59 0,64 0,69 0,74 0,76 0,81 0,86 0,91

L1 = H/n – 150 — blade overhang size beyond the body dimension (mm), where:

H – height of the valve [mm];

n – number of blades.

Valves with dimensions that are not included in the table can be manufactured on request.

KRDP 120 F1 KRDP 120 F2

200 ≤ H ≤ 500

H + 40

H + 20

A + 40

A + 20

Ø9 200

L1 200

H + 40

H + 20

A + 40

A + 20

Ø 9

500 ≤ H ≤ 1000

A + 60

A + 30

H + 60

H + 30

200

A + 60

A + 30

H + 60

H + 30

A + 60

A + 30

H + 60

H + 30

200

200 ≤ H = 400 – 1 blade;

400 < H = 800 – 2 blades;

800 < H – 3 blades.

www.ventilation-system.com

TECHNICAL MAINTENANCE

Maintenance of the valve involves checking its serviceability: free (without jamming) rotation of the ﬂaps; reliability of installation. The

valve maintenance intervals should correspond to the established maintenance periods for the ﬁre protection equipment complex of

the operated facility.

The fusible link triggering mechanism is restored by replacing the fusible link (in the absence of ﬁre impact).

STORAGE AND TRANSPORTATION REGULATIONS

• Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.

• Follow the handling requirements applicable for the particular type of cargo.

• The unit can be carried in the original packaging by any mode of transport provided proper protection against precipitation and

mechanical damage. Avoid sharp blows, scratches, or rough handling during loading and unloading.

INSTALLATION AND SETUP

The valve is installed in ventilation ducts or in intersections of enclosing structures and closes in the event of a ﬁre.

Valve’s position in the valve space is vertical (air ﬂow is horizontal).

Visually inspect the valve before installing it.

Repair any damage or dents caused by improper transportation or storage.

The valves should be conﬁgured to the required working pressure after their installation during the adjustment (commissioning) of the

pressure generation ventilation system.

UNIT DESIGN AND OPERATING PRINCIPLE

The valve consists of a rectangular galvanized steel mounting casing (1). Inside the casing there is one or more ﬂaps made of heat-

resistant material (2) of rotary type, a spring mechanism (3) for adjusting the valve opening start. The adjustment is performed during

commissioning.

In case of a ﬁre, the valve design ensures that the blade is automatically locked at the stops by melting the fusible link (4). The valve’s

tightness in case of ﬁre is ensured by a tape that is ﬁxed around the perimeter of the blade and expands at high temperatures.

KRDP

www.ventilation-system.com

FOLLOWING THE REGULATIONS STIPULATED HEREIN WILL ENSURE A LONG AND

TROUBLEFREE OPERATION OF THE UNIT

USER’S WARRANTY CLAIMS SHALL BE SUBJECT TO REVIEW ONLY UPON PRESENTATION

OF THE UNIT, THE PAYMENT DOCUMENT AND THE USER’S MANUAL WITH THE

PURCHASE DATE STAMP

MANUFACTURER’S WARRANTY

The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby

declare that the product complies with the provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/EU of the European

Parliament and of the Council, Low Voltage Directive (LVD) 2014/35/EU of the European Parliament and of the Council and CE-marking

Council Directive 93/68/EEC. This certiﬁcate is issued following test carried out on samples of the product referred to above.

The manufacturer hereby warrants normal operation of the unit for 24 months after the retail sale date provided the user's observance

of the transportation, storage, installation, and operation regulations. Should any malfunctions occur in the course of the unit operation

through the Manufacturer's fault during the guaranteed period of operation, the user is entitled to get all the faults eliminated by the

manufacturer by means of warranty repair at the factory free of charge. The warranty repair includes work speciﬁc to elimination of faults

in the unit operation to ensure its intended use by the user within the guaranteed period of operation. The faults are eliminated by means

of replacement or repair of the unit components or a speciﬁc part of such unit component.

The warranty repair does not include:

• routine technical maintenance

• unit installation/dismantling

• unit setup

To beneﬁt from warranty repair, the user must provide the unit, the user's manual with the purchase date stamp, and the payment

paperwork certifying the purchase. The unit model must comply with the one stated in the user’s manual. Contact the Seller for warranty

service.

The manufacturer’s warranty does not apply to the following cases:

• User’s failure to submit the unit with the entire delivery package as stated in the user’s manual including submission with missing

component parts previously dismounted by the user.

• Mismatch of the unit model and the brand name with the information stated on the unit packaging and in the user's manual.

• User’s failure to ensure timely technical maintenance of the unit.

• External damage to the unit casing (excluding external modiﬁcations as required for installation) and internal components caused

by the user.

• Redesign or engineering changes to the unit.

• Replacement and use of any assemblies, parts and components not approved by the manufacturer.

• Unit misuse.

• Violation of the unit installation regulations by the user.

• Violation of the unit control regulations by the user.

• Unit connection to power mains with a voltage diﬀerent from the one stated in the user's manual.

• Unit breakdown due to voltage surges in power mains.

• Discretionary repair of the unit by the user.

• Unit repair by any persons without the manufacturer’s authorization.

• Expiration of the unit warranty period.

• Violation of the unit transportation regulations by the user.

• Violation of the unit storage regulations by the user.

• Wrongful actions against the unit committed by third parties.

• Unit breakdown due to circumstances of insuperable force (ﬂood, earthquake, war, hostilities of any kind, blockades).

• Missing seals if provided by the user’s manual.

• Failure to submit the user’s manual with the unit purchase date stamp.

• Missing payment paperwork certifying the unit purchase.

www.ventilation-system.com

CERTIFICATE OF ACCEPTANCE

Unit Type Fire protection pressure control valve

Model

Serial Number

Manufacture Date

Quality Inspector’s

Stamp

SELLER INFORMATION

Seller

Seller’s Stamp

Address

Phone Number

E-mail

Purchase Date

This is to certify acceptance of the complete unit delivery with the user’s manual. The warranty terms are

acknowledged and accepted.

Customer’s Signature

INSTALLATION CERTIFICATE

The _____________________________________ unit is installed pursuant to the requirements stated

in the present user's manual.

Installation Stamp

Company name

Address

Phone Number

Installation

Technician’s Full Name

Installation Date: Signature:

The unit has been installed in accordance with the provisions of all the applicable local and national construction,

electrical and technical codes and standards. The unit operates normally as intended by the manufacturer.

Signature:

WARRANTY CARD

Unit Type Fire protection pressure control valve

Seller’s Stamp

Model

Serial Number

Manufacture Date

Purchase Date

Warranty Period

Seller

V243-1EN-01

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Vents Unité de contrôle

Vents

Vents BU-1-60 TF Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur