Vents VUT R 400 EH EC A17 Manuel utilisateur

USER’S MANUAL

• VUT R 400 EH EC A17

• VUT R 700 EH EC A17

• VUT R 900 EH EC A17

• VUT R 1200 EH EC A17

• VUT R 1500 EH EC A17

• VUT R 2000 EH EC A17

• VUT R 400 EH EC A18

• VUT R 700 EH EC A18

• VUT R 900 EH EC A18

• VUT R 1200 EH EC A18

• VUT R 1500 EH EC A18

• VUT R 2000 EH EC A18

Heat recovery air handling unit

equipped with an electric heater

www.ventilation-system.com

Safety requirements ............................................................................................... 3

Purpose ....................................................................................................................... 5

Delivery set ................................................................................................................ 5

Designation key ....................................................................................................... 5

Technical data ........................................................................................................... 6

Unit design and operating logic ........................................................................ 7

Mounting and set-up ............................................................................................. 8

Connection to power mains ................................................................................ 13

Unit control ............................................................................................................... 14

Technical maintenance ......................................................................................... 15

Fault handling .......................................................................................................... 17

Storage and transportation regulations ......................................................... 17

Manufacturer's warranty ...................................................................................... 18

Acceptance certicate ........................................................................................... 19

Seller information ................................................................................................... 19

Installation certicate ............................................................................................ 19

Warranty card ........................................................................................................... 19

CONTENTS

RECYCLE AT THE END OF THE SERVICE LIFE.

DO NOT DISPOSE THE PRODUCT WITH UNSORTED MUNICIPAL TRASH.

www.ventilation-system.com

• Read the user’s manual carefully prior to installing and operating the unit.

• Full the user’s manual requirements as well as the provisions of all the applicable local and national construction, electrical and

technical norms and standards.

• The warnings contained in the user’s manual must be considered most seriously since they contain vital personal safety information.

• Failure to follow the rules and safety precautions noted in this user’s manual may result in an injury or unit damage.

• After a careful reading of the manual, keep it for the entire service life of the unit.

• While transferring the unit control the user’s manual must be turned over to the receiving operator.

Symbol legend:

WARNING!

DO NOT!

SAFETY REQUIREMENTS

This user’s manual consisting of the technical details, operating instructions and technical specication covers the installation and mounting

of the VUT R EH EC heat recovery air handling unit (hereinafter referred to as «the unit»).

UNIT MOUNTING AND OPERATION SAFETY PRECAUTIONS

• Disconnect the unit from power mains prior

to any installation operations. • The unit must be grounded!

• Do not lay the power cable of the unit in

close proximity to heating equipment.

• While installing the unit follow the safety

regulations specic to the use of electric

tools.

• Do not change the power cable length at

your own discretion.

• Do not bend the power cable.

• Avoid damaging the power cable.

• Do not put any foreign objects on the power

cable.

• Unpack the unit with care.

• Do not use damaged equipment or cables

when connecting the unit to power mains.

• Do not operate the unit outside the

temperature range stated in the user’s

manual.

• Do not operate the unit in aggressive or

explosive environments.

• Do not touch the unit controls with wet

hands.

• Do not carry out the installation and

maintenance operations with wet hands.

• Do not wash the unit with water.

• Protect the electric parts of the unit against

ingress of water.

www.ventilation-system.com

UNIT MOUNTING AND OPERATION SAFETY PRECAUTIONS

• Do not allow children to operate the unit. • Disconnect the unit from power mains prior to

any technical maintenance.

• Do not store any explosive or highly ammable

substances in close proximity to the unit.

• When the unit generates unusual sounds,

odour or emits smoke disconnect it from

power supply and contact the Seller.

• Do not open the unit during operation. • Do not direct the air ow produced by the unit

towards open ame or ignition sources.

• Do not block the air duct when the unit is

switched on.

• In case of continuous operation of the unit

periodically check the security of mounting.

• Do not sit on the unit and avoid placing

foreign objects on it. • Use the unit only for its intended purpose.

www.ventilation-system.com

The unit is designed to ensure continuous mechanical air exchange in houses, oces, hotels, cafés, conference halls, and other utility and

public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the ltered stream of supply air.

The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses, summer gardens, and other spaces with high

humidity.

Due to the ability to save heating energy by means of energy recovery, the unit is an important element of energy-ecient premises.

The unit is a component part and is not designed for stand-alone operation.

It is rated for continuous operation.

Transported air must not contain any ammable or explosive mixtures, evaporation of chemicals, sticky substances, brous materials,

coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, pathogenic

germs).

Relative humidity of transported air must not exceed 80 % at an ambient temperature of +20 °C.

PURPOSE

Name Quantity

Air handling unit 1 item

Control panel 1 item

User's manual 1 item

Packing box 1 item

DELIVERY SET

Motor type

EC - electronically commutated motors

Control

A17 - th-Tune control panel with an LCD display

A18 - pGD1 control panel with an LCD display

Spigot orientation

H - horizontal

Heater type

E - electrical heater

Air capacity

[m3/h]

Heat exchanger type

R - rotary

Unit type

VUT - ventilation with heat recovery

VUT R XXX EH EC XXX

DESIGNATION KEY

THE UNIT MAY NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL OR

SENSORY CAPACITIES, OR LACKING THE APPROPRIATE TRAINING.

THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED PERSONNEL AFTER THE

APPROPRIATE BRIEFING.

THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED ACCESS BY UNATTENDED

CHILDREN.

www.ventilation-system.com

The unit is designed for indoor application with the ambient temperature ranging from +1 °C up to +40 °C and relative humidity up to 80 %.

In order to prevent condensation on the internal walls of the units, it is necessary that the surface temperature of the casing is 2-3 °C higher

than the dew point temperature of the transported air.

Hazardous parts access and water ingress protection rating:

IP 44 for the unit motors

IP 22 for the assembled unit connected to the air ducts.

The unit design is constantly being improved, so some models can slightly dier from those ones described in this manual.

TECHNICAL DATA

VUT R 400 EH EC

VUT R 700 EH EC

VUT R 900 EH EC

VUT R 1200 EH EC

VUT R 1500 EH EC

VUT R 2000 EH EC

Voltage [V / Hz] 1~ 220-240 / 50-60 3~ 400 / 50-60

Maximum fan power [W] 2 items x 100 2 items x 105 2 items x 135 2 items x 208 2 items x 222 2 items x 448

Electric heater power [kW] 2,0 3,3 4,5 6,0 9,0 12,0

Total unit power [W] 2290 3615 4940 6570 9750 13070

Total unit current [A] 9,9 15,8 7,2 9,5 14,1 22,4

Maximum air capacity [m3/h] 400 700 900 1200 1500 2250

RPM up to 3100 up to 2600 up to 2600 up to 1930 up to 2000 up to 3000

Sound pressure level at 3 m distance [dB(A)] 45 52 58 60 62 64

Maximum transported air temperature [°C] -25…+60

Casing material aluzinc

Insulation 20 mm mineral wool 25 mm mineral wool

Filter:

extract G4

intake G4

Connected air duct diameter [mm] Ø160 Ø250 Ø250 Ø315 Ø315 500x300

Weight [kg] 112 128 130 165 175 198

Heat recovery eciency [%] up to 85

Heat exchanger type rotary

Heat exchanger material aluminium

www.ventilation-system.com

ØD

VUT R 400 EH EC / VUT R 700 EH EC / VUT R 900 EH EC

VUT R 1200 EH EC / VUT R 1500 EH EC

VUT R 2000 EH EC

Unit model Dimensions [mm]

øD A A1 E F G L L1 H J X Y

VUT R 400 EH EC 159 1050 1167 225 167 333 648 200 670 440 - -

VUT R 700 EH EC 249 1210 1326 243 180 340 745 260 700 580 - -

VUT R 900 EH EC 249 1210 1326 243 180 340 745 260 700 580 - -

VUT R 1200 EH EC 314 1335 1450 373 220 438 745 - 880 460 - -

VUT R 1500 EH EC 314 1430 1535 427 275 460 855 - 1010 560 - -

VUT R 2000 EH EC - 1485 1754 - 275 480 875 - 1010 630 500 300

www.ventilation-system.com

The unit has the following operating logic:

Warm stale extract air from the room ows to the unit, where it is ltered by the extract lter. Then the air is moved through the rotary

heat exchanger and is exhausted outside with the exhaust fan. Clean cold air from outside is moved to the intake lter. Then ltered air ows

through the rotary heat exchanger and the electric heater where it is warmed up to the pre-set temperature value and is moved to the room

with the supply fan.

Heat energy of warm extract air is transferred to clean intake fresh air from outside and warms it up in the rotary heat exchanger. Heat

recovery minimizes thermal energy losses and space heating expenses in cold seasons.

The unit is a framework construction that includes a frame made of rigidly xed sandwich panels. The three-layer sandwich panels are made

of aluminium and galvanized sheets, internally lled with heat- and sound-insulated mineral wool.

The air handling unit is equipped with quick-detachable service panels for scheduled repair and maintenance operations.

Route a power and a ground cable through the screwed cable glands to connect those to the terminal block located in the control unit.

Thewiring diagram is shown on the inner side of the control unit cover.

UNIT DESIGN AND OPERATING LOGIC

INTAKE AIR

EXHAUST AIR

SUPPLY AIR

EXTRACT AIR

Exhaust fan

Rotary heat exchanger

Extract lter

Control unit

Supply fan

Electric heater

Intake lter

UNIT OPERATION LOGIC

SERVICE SIDE VIEW

www.ventilation-system.com

60 mm

SUSPENDED MOUNTING UNIT MOUNTING ON A HORIZONTAL PLANE

Model A, mm

VUT R 400 EH EC 800 mm

VUT R 700 EH EC

900 mmVUT R 900 EH EC

VUT R 1200 EH EC

VUT R 1500 EH EC 1000 mm

VUT R 2000 EH EC

MOUNTING AND SETUP

While mounting the unit provide enough access for maintenance or repair work. The minimum recommended clearances between the unit

and the adjoining walls are given in the gure below.

Before starting the unit make sure that the rotary heat exchanger cells are clean and free from damage. Check the belt tension. The tension

force is regulated by the spring on the motor suspension mount.

The unit may be suspended on a threaded rod that is xed inside a dowel or may be rigidly xed on a horizontal plane.

To attain the optimal performance of the unit and to minimise turbulence-induced air pressure losses connect a straight air duct section on

both sides of the unit while mounting.

Minimum straight air duct length:

• equal to 1 air duct diameter on intake side

• equal to 3 air duct diameters on outlet side

If the air ducts are not connected or the connected air ducts are too short, protect the unit parts from ingress of foreign objects by covering

the spigots with a protecting grille or other protecting device with mesh width not more than 12.5 mm to protect internal parts of the unit

against penetration of foreign objects.

SAFETY PRECAUTIONS

The unit must be mounted to a rigid and stable structure.

The unit must be suspended using anchor bolts. Make sure that the base structure is capable of sustaining the unit weight. Otherwise reinforce

the mounting location with beams or similar elements.

If the bolts used for the unit mounting are too short the unit can generate abnormal

noise and resonate with the ceiling. Use bolts of sucient length to prevent resonance.

If the abnormal noise is generated at the spiral air duct joint replace the spiral air duct

with a exible one to prevent resonance. Flexible anti-vibration connectors are another

alternative for dealing with resonance.

UNIT MOUNTING

Install M8 anchor bolts before proceeding with the installation. Insert the anchor

bolt into the suspended mounting opening and secure it with nuts and washers. The

unit mounting example is shown in the illustration on the right.

Threaded rod

Nut

Nut and lock nut

L-shaped bracket

Washer

Vibration

absorbing rubber

www.ventilation-system.com

THTUNE CONTROL PANEL INSTALLATION

To install the rear part of the control panel use a suitable mounting box (minimum diameter 65 mm and minimum depth 31 mm).

1. 1. Use a screwdriver to pull the front and the rear sides of the

control panel apart.

2. Disconnect the 4-pin socket from the front part of the control

panel.

3. Complete the electrical connections according to the external wiring diagram (Page 12).

4. Secure the rear part of the control panel in the mounting box using the screws supplied.

5. Reattach the 4-pin connector.

6. Lay all the cables and install the control panel starting from the bottom. Make sure that none of the internal wires prevent closing with a click.

Outline dimensions of the control panel

rear part, mm

The outline drawing of the control panel rear part is on the left.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Vents Unité de traitement de l'air

Vents

Vents VUE2 150 P EC Comfo A6 Manuel utilisateur

Vents

Vents DVUT 300 PB EC Manuel utilisateur

Vents

Vents VUT 230 V5 Manuel utilisateur

Vents

Vents VUT 160 V EC Manuel utilisateur

Vents

Vents VUE 100 P3 Manuel utilisateur

Vents

Vents Micra 150 E Manuel utilisateur

Vents

Vents VUE 270 V5B EC Manuel utilisateur

Vents

Vents VUT 350 EH Manuel utilisateur

Vents

Vents VUT R 400 TN H EC A17 Manuel utilisateur

Vents

Vents VUT 160 PB EC Manuel utilisateur

Vents

Vents VUT 100 P mini Manuel utilisateur

Vents

Vents DVUT 1000 PB EC Manuel utilisateur

Vents

Vents VUT 100 P mini Instructions de montage

Vents

Vents Micra 100 E Wi-Fi Manuel utilisateur

Vents

Vents DVUT 300 PB EC Manuel utilisateur

Vents

Vents VUT 300 EVK mini EC Manuel utilisateur

Vents

Vents VUT 2000 PBE EC Manuel utilisateur

Vents

Vents KP 80 Manuel utilisateur

Vents

Vents VUTR 280 V EC Manuel utilisateur

Vents

Vents VUT 2000 PBW EC Manuel utilisateur

Vents

Vents VUTR 250 P EC Manuel utilisateur

Vents

Vents DVUT 300 HB Manuel utilisateur

Vents

Vents VUT 550 PBW EC Manuel utilisateur

Vents

Vents Micra 200 ERV WiFi Manuel utilisateur

Manuels Unité de traitement de l'air populaires d'autres marques

Klimor

Klimor EVO-S Manuel utilisateur

Salda

Salda SMARTY XP Mode d’emploi

BLAUBERG

BLAUBERG KOMFORT Roto EC S400 Manuel utilisateur

Trenton

Trenton TPLP Series Manuel utilisateur

Kemper

Kemper CleanAirTower Manuel utilisateur

Daikin

Daikin DV PTC 14 Series Manuel utilisateur

Haier

Haier HB2400VA1M20 Manuel utilisateur

Webasto

Webasto BlueCool A-Series Manuel utilisateur

RDZ

RDZ DA 701 Document technique

Carrier

Carrier 39T Dimensions et guide d'installation

Armstrong Air

Armstrong Air BCE5V Series Manuel utilisateur

ActronAir

ActronAir CAY500T Manuel utilisateur

Carrier

Carrier 40MBDAQ Manuel utilisateur

Allied

Allied A93UH1E Manuel utilisateur

Nortek

Nortek B6VMAI Manuel utilisateur

TemperZone

TemperZone Econex Pro OPA 1410RLTM4FPQD Guide de maintenance et de service

RDZ

RDZ WHR 200 Document technique

AAON

AAON H3 Series Manuel du propriétaire