Velleman CCTVPROM5 Manuel utilisateur

CCTVPROM5

ALL-ROUND SECURITY SET

MULTIFUNCTIONELE BEVEILIGINGSSET

ENSEMBLE VIDÉOSURVEILLANCE MULTIFONCTIONNEL

JUEGO DE VIDEOVIGILANCIA MULTIFUNCIÓN

UNIVERSELLER ÜBERWACHUNGSSATZ

QUICK INSTALLATION GUIDE 4

BEKNOPTE INSTALLATIEHANDLEIDING 10

GUIDE D’INSTALLATION RAPIDE 16

GUÍA RÁPIDA 22

SCHNELLEINSTIEG 28

CCTVPROM5

16/09/2009 ©Velleman nv

1 DC 12V input terminal

2 Video output connector

1 DC 12V ingangsaansluiting

2 Video-uitgangsaansluiting

1 Connexion d’entrée CC 12V

2 Connexion de sortie vidéo

1 DC 12V-Eingangsanschluss

2 Video-Ausgangsanschluss

1 Conexión de entrada CC 12V

2 Conexión de salida de vídeo

*HDD not included - *Harde schijf niet meegeleverd -

*Disque dur non inclus - *Disco duro no incluido -

*Festplatte nicht mitgeliefert

A B (SATA)

power supply

data bus

voeding

databus

alimentation

bus de données

alimentación

bus de datos

Stromversorgung

Datenbus

CCTVPROM5

16/09/2009 ©Velleman nv

CCTVPROM5

16/09/2009 ©Velleman nv

Quick installation guide

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its

lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted

municipal waste; it should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling service. Respect the local

environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into

service. If the device was damaged in transit, do not install or use it and contact your dealer. Damage

caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

NOTICE:

This document is a Quick installation guide. For more details, refer to the full user manual which

can be found on the included CD-ROM.

Package content:

•1 x DVR with built-in SATA connection (DVR4L4)

•4 x IR colour cameras (CAMCOLBUL5H3)

•4 x 20m camera cables

•1 x high-efficiency DC-DC converter for DVR and 4 cameras

•1x power adaptor 100-240VAC 50/60Hz to 19VDC 2.21A + power cable

•1x mounting bracket for HDD + screws

•1x CD-ROM containing the full user manual (DVR4L4)

2. Safety Instructions

Keep the device away from children and unauthorised users.

Risk of electroshock when opening the cover. Touching live wires can

cause life-threatening electroshocks.

Always disconnect mains power when the device is not in use or when

servicing or maintenance activities are performed. Handle the power

cord by the plug only.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Indoor use only

Keep this device away form rain, moisture, splashing and dripping liquids.

Never put object filled with liquid on top.

Keep this device away from dust.

Keep this device away from extreme heat. Make sure the ventilation

openings are clear at all times. For sufficient air circulation, leave at least

1” (±2.5 cm) in front of the openings.

Protect this device from shocks and abuse. Avoid brute force when

operating the device.

•Familiarise yourself with the functions of the device before actually using it.

•All modifications of the device are forbidden for safety reasons.

•Only use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

•Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and

the dealer will not accept responsibility for any ensuing defects or problems.

•Do not use this product to violate privacy laws or perform other illegal activities.

CCTVPROM5

16/09/2009 ©Velleman nv

4. Features

DVR4L4

•H.264 video compression technology

ohighly improves video quality for live viewing and recording

orecording file size is minimized for longest recording time

•multiplex: allows live display, recording, playback, and backup at the same time

•backup function: supports USB 2.0 flash drive backup

•intelligent motion trigger recording

oadvanced motion detection

oscheduled motion detection recording (with 1 adjustable parameter)

oquick search function

•multi-language OSD: English, French, Dutch, German, Italian, Portuguese, Spanish, Czech,

Hungarian and Greek

•full user manual: English, French, German, Spanish

•supports SATA HDD

•supports daylight-saving function

•supports manual / timer / motion / network recording functions

•system auto recovery after power reconnected

•hard disks in option: 500GB (HD500GB/S) or 750GB (HD750GB/S) (not included)

•network backup

•A/V support: supports 1 audio input and 1 audio output for sound recording

•supports TCP/IP, PPPoE, DHCP and DDNS network connection

•VGA interface built-in with output resolution up to 1600 x 1200

CAMCOLBUL5H3

•Weatherproof

•with B/W night vision (IR LEDs)

•automatic triggering of IR function in case of insufficient ambient light (-> switch to B/W view)

•automatic deactivation of IR function in case of normal ambient light

5. Overview

Refer to the illustrations on page 2of this manual.

Front panel

LED

indications

POWER DVR power is on

HDD reading or recording activities on the hard disk

TIMER timed recording is enabled

PLAY the DVR is in playing mode

MENU Press to enter the main menu.

ENTER Press to confirm settings

LIST

MANUAL List the information of the manual-recorded files. A separate file is

created for each manual recording.

MOTION List the information of the motion-trigger-recorded files.

SYSTEM List the information of the system-recorded files. The DVR system will

save one recorded file every one hour.

TIMER List the information of the timer-recorded files.

PLAY Press to play the recorded video.

SLOW In playback mode, press to play the recorded file slowly.

ZOOM In live or playback mode, press to enlarge the image of the selected channel.

SEQ Press to activate the call monitor function, and press again to quit.

4CH: Press to show the 4 channel display mode.

1 ~4 Press a button to select the corresponding channel.

POWER Press and holt to switch off the DVR.

NAVIGATE

Press one of the four positions on the navigate button to move the

cursor up ( ), down ( ), left ( ) or right ( ).

In play-back mode, press the buttons to play/pause ( ), stop

(), fast rewind ( ) or fast forward ( ) the play-back file.

In setting mode, press the up ( ) or down ( ) button to change

CCTVPROM5

16/09/2009 ©Velleman nv

the setting in the menu.

AUDIO = SLOW + ZOOM

Press SLOW and ZOOM simultaneous to select live or play-back sounds

KEY LOCK

= MENU + ENTER

Press MENU and ENTER simultaneously to lock the front panel keys. Press any key

followed by the DVR password to unlock the keys.

USB port

To quickly backup or upgrade firmware/OSD, connect a compatible USB flash drive

to this USB port.

Note: prior to using the USB flash drive, make sure it is formatted in “FAT32”

format.

back panel

19V DC Power supply input.

VIDEO IN 4 video input channels to connect 4 external video sources e.g. cameras.

VIDEO OUT 1 video output channel to connect the DVR to the main monitor.

AUDIO IN 1 audio input to connect an external audio source e.g. from a camera with audio.

AUDIO OUT 1 audio output to connect to an audio device, e.g. a speaker.

LAN port Connect the DVR to a local network by plugging a network cable into this port.

VGA connector for VGA monitor

6. Hardware setup

Installing the Hard Disk Drive (HDD)

Refer to the illustrations on page 2of this manual.

•Obtain a suitable HDD (not included), type SATA (Serial Advanced Technology Attachment).

•Make sure to unplug the device from the mains before servicing and do not touch any electronic

circuitry to avoid electrostatic discharge.

•Unscrew the 6 screws (1 on either side and 4 on the back) that hold the cover in place.

•Lift the cover (back first).

•Screw the mounting brackets on the HDD (screws included).

Note: the PCB must be facing upwards when mounting the HDD into the DVR.

•Connect the SATA data cable and power supply to the HDD.

•Screw the HDD on the bottom of the DVR housing PCB facing upwards using the included screws.

•Close the cover (front first) and secure it with the 6 screws.

Connecting a VGA monitor

•Obtain a suitable monitor (not included) and connect it to the BNC or VGA video output port on the

back of the DVR.

Connecting the power supply

•Plug the DC output connector of the included power adaptor into the 19VDC power input of the

included DC-DC convertor.

WARNING: only use the included adaptor.

•Plug the 19VDC output connector of the DC-DC convertor into the 19VDC power input at the back

of the DVR.

•Plug the included power cable into the adaptor input connector and plug the other end into the

mains. Do not switch the DVR on yet.

Connecting a camera

•Connect the camera’s video terminal (VIDEO) with the video input terminal of the video monitor

using the included cable. The number next to the input connectors represents the channel number.

•Connect the power terminal of the camera with a 13.5VDC output on the DC-DC convertor.

Connecting audio

•The DVR supports one audio input. Connect the audio output of an audio source to the audio input

(lower connector) of the DVR. Connector type is BNC.

•There is also an audio output connector. Connect an audio device e.g. a speaker to this connector

when desired. Connector type is BNC.

Connecting Local Area Network (LAN)

•Connect the DVR to a local network by plugging a network cable into the LAN port at the back of

the DVR. Connector type is 8P8C (RJ45). Setup is done through the OSD.

CCTVPROM5

16/09/2009 ©Velleman nv

7. Preliminary settings

•Make sure the connected cameras are on and press the POWER button to switch on the DVR. It

takes about 10 to 15 seconds to start up.

Setting date and time

•Before using the DVR the time and date should be set to get a valid time stamp.

•Press the MENU button and enter the password to go into the menu list.

Note: default admin password is “0000” (4 times zero).

•Use the NAVIGATION button to move to the DATE menu item. Select it to set date, time and

daylight savings option.

Note: once recording started, do not change date or time as this will make it very difficult to

find back the recorded files.

Note: when using the DVR for the first time and the correct time is set, leave it on for at

least 48 hours.

Password setting

•Press the MENU button and enter the password to go into the menu list.

•Select the ADVANCED menu item.

•Go to SYSTEM (or SYSTEM INFO depending on DVR type). Select PASSWORD and press the ENTER

button to set the password. Press the cursor up ( ) or down ( ) button to select the value of

the first number and press enter to save and go to the next character. Repeat this for all four

password numbers.

Note: default admin password is “0000” (4 times zero).

Record settings

•Press the MENU button and enter the password to go into the menu list.

•Select the RECORD menu item using the NAVIGATION button.

•Set the image size, image quality and images per second for recording.

•Refer to the full user manual on the included CD-ROM for more details.

8. Operation

Display

The following image shows the screen layout.

A system date and time

B general system status

C available HDD capacity

D channel status

control panel locked/unlocked timed recording

HDD overwrite motion detected

Zoom mode / actual size recording

live audio channel enabled /

disabled

CCTVPROM5

16/09/2009 ©Velleman nv

Note that actual screen icons might differ slightly from the ones shown above. Recording

•Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.

•When the auto-recording and pre-alarm functions are enabled, the device will start recording

images.

Note: the device will overwrite the oldest 8GB of data.

•Default the recording icon ( ) is shown.

•In case the motion detection is activated and a motion is detected, the motion icon ( ) is shown.

•When timed recording is enabled, the timed recording icon ( ) is showed and the timed recording

LED is on.

Play-back

•Make sure the control panel is not locked and press the PLAY button on the control panel.

Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the

recording must be at least 273 seconds long).

•The fast forward ( ) and fast rewind ( ) buttons will increase resp. decrease the play-back

speed. Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).

•Press the pause button ( ) to temporary suspend video play-back.

•Press the stop button ( ) to return to live monitoring.

•Press the SLOW button once to set play-back speed to 1/4th and twice for 1/8th.

•There are two ways to search recorded files: by list or by time.

Note: the recorded files can also be searched via the included Video Viewer software.

•To search by list, press the LIST button on the front panel (make sure the control panel is not

locked). An overview of the recorded file types (ALARM, MANUAL, MOTION and SYSTEM) is shown.

Select the desired list and press ENTER to start play-back.

•To search by time press the MENU button and navigate to “EVENT LOG”. Go to “QUICK SEARCH”

and press “ENTER”. Search for any event that happened at a specific time.

Firmware/OSD upgrade

•This is done using a USB flash drive (not included).

Note: the DVR can also be upgraded via the included Video Viewer software.

•Format the USB memory device to FAT32 format.

•Get the update file from the distributor and copy it to the USB device. Do not rename the file.

•Insert the USB device into the USB port and wait until it is detected.

•Go to MENU, ADVANCE CONFIG, SYSTEM INFO.

•Select UPGRADE, START and press ENTER.

•Select YES and press ENTER to confirm. Do not switch off the DVR until the upgrade is finished.

9. Technical specifications

DVR4L4

video system PAL

video compression H.264 (CIF)

video input 4 channels, composite video signal 1Vpp / 75 ohms BNC

video output composite video signal 1Vpp / 75 ohms BNC

VGA – max. 1600 x 1200 pixels

maximum recording rate (PAL) 352 × 288 pixels with 100 IPS

image quality setting best - high - normal - basic

hard disk storage built-in SATA type, support 1x HDD, support HDD capacity up to

1TB (HDD not incl)

recording mode manual / timer / motion / network controlled

refresh rate 100 IPS for PAL

motion detection area 16 x 12 grids per channel

motion detection sensitivity 1 parameter with 4 sensitivity levels (high, normal, low, off)

pre-alarm recording 8MB

backup device USB 2.0 flash drive (for backup and firmware updates)

digital zoom 2x (live & playback)

CCTVPROM5

16/09/2009 ©Velleman nv

key lock yes

video loss detection yes

camera title up to 6 characters

video adjustments hue / colour / contrast / brightness

date display format YY/MM/DD, DD/MM/YY, MM/DD/YY, and off

power source 19VDC

power consumption < 42W

operating temperature 10°C ~ 40°C (50°F ~ 104°F)

system recovery system auto recovery after power reconnected

dimensions 343 x 223 x 59mm

audio I/O 1x audio in, 1x audio out (mono)

web transmitting / compression

format

H.264

Ethernet 10/100 Base-T, supports network control and LiveView via Ethernet

web interface supports licensed software AP and IE browser

network connection supports TCP/IP, PPPoE, DHCP and DDNS function

CAMCOLBUL5H3

pick-up element 1/3" HR colour CCD image sensor

number of pixels 753(H) x 582(V) - PAL -

Resolution 500 TV lines

min. Illumination 0.6 Lux (F2.0) ; 0 Lux (15m IR on)

S/N ratio > 48dB (AGC off)

electronic shutter 1/50 to 1/100000 sec.

gamma correction 0.45

white balance automatic

AGC yes

standard board lens f3.6mm / F2.0

lens angle 79°

video output 1.0Vpp composite, 75 ohm

power supply DC 12V ± 10% (regulated)

current consumption 90mA (IR off), 240mA (IR on)

water-resistance IP67

IR LEDs 24

range (IR light) > 15m

Dimensions 103 x 63 x 55mm

Weight 380g (including bracket)

operating temperature 0°C - 45°C

Use this device with original accessories only. Velleman nv cannot be held responsible in

the event of damage or injury resulted from (incorrect) use of this device. For more info

concerning this product, please visit our website www.velleman.eu. The information in

this manual is subject to change without prior notice.

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.

No part of this manual or may be copied, reproduced, translated or reduced to any electronic

medium or otherwise without the prior written consent of the copyright holder.

CCTVPROM5

16/09/2009 ©Velleman nv

Beknopte installatiehandleiding

1. Inleiding

Aan alle ingezetenen van de Europese Unie

Belangrijke milieu-informatie betreffende dit product

Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus

wordt weggeworpen, dit toestel schade kan toebrengen aan het milieu. Gooi dit toestel (en

eventuele batterijen) niet bij het gewone huishoudelijke afval; het moet bij een

gespecialiseerd bedrijf terechtkomen voor recyclage. U moet dit toestel naar uw verdeler of

naar een lokaal recyclagepunt brengen. Respecteer de plaatselijke milieuwetgeving.

Hebt u vragen, contacteer dan de plaatselijke autoriteiten betreffende de verwijdering.

Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Werd

het toestel beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.

OPMERKING:

Dit document is een beknopte installatiehandleiding. Raadpleeg de volledige handleiding op de

cd-rom voor meer informatie (enkel beschikbaar in het Engels, Frans, Duits en Spaans).

Inhoud:

•1 x DVR met ingebouwde SATA-aansluiting (DVR4L4)

•4 x kleurencamera's met infrarood (CAMCOLBUL5H3)

•4 x camerakabels van 20m

•1 x high-efficiency DC-DC converter voor de DVR en de 4 camera's

•1x voedingsadapter 100-240 VAC~50/60 Hz naar 19 VDC 2,21 A + voedingskabel

•1x montagebeugel voor harde schijf + schroeven

•1x cd-rom met volledige handleiding (DVR4L4)

2. Veiligheidsinstructies

Houd buiten het bereik van kinderen en onbevoegden.

Elektrocutiegevaar bij het openen van het toestel. Raak geen kabels

aan die onder stroom staan om dodelijke elektroshocks te vermijden.

Trek de stekker uit het stopcontact (trek niet aan de kabel!) voordat u

het toestel reinigt en als u het niet gebruikt.

3. Algemene richtlijnen

Raadpleeg de Velleman® service- en kwaliteitsgarantie achteraan de handleiding.

Enkel voor gebruik binnenshuis.

Bescherm dit toestel tegen regen, vochtigheid en opspattende

vloeistoffen. Plaats geen object gevuld met vloeistof op het toestel.

Bescherm tegen stof.

Bescherm tegen extreme hitte. Zorg dat de verluchtingsopeningen niet

verstopt geraken. Voorzie een ruimte van minstens 2,5 cm tussen het

toestel en elk ander object.

Bescherm tegen schokken. Vermijd brute kracht tijdens de bediening.

•Leer eerst de functies van het toestel kennen voor u het gaat gebruiken.

•Om veiligheidsredenen mag u geen wijzigingen aanbrengen.

•Gebruik het toestel enkel waarvoor het gemaakt is. Bij onoordeelkundig gebruik vervalt de

garantie.

•De garantie geldt niet voor schade door het negeren van bepaalde richtlijnen in deze handleiding

en uw dealer zal de verantwoordelijkheid afwijzen voor defecten of problemen die hier

rechtstreeks verband mee houden.

•Leef bij gebruik van dit toestel de wetgeving betreffende de privacy na.

Table des matières

Langues :

Autres manuels Velleman Système de sécurité

Velleman

Velleman PEM7DW Manuel utilisateur

Velleman

Velleman CCTVPROM15 Manuel utilisateur

Velleman

Velleman HAM06WS Manuel utilisateur

Velleman

Velleman CAMSETW2 Manuel utilisateur

Velleman

Velleman HAM202 Manuel utilisateur

Velleman

Velleman MA620B Manuel utilisateur

Velleman

Velleman CCTVPROM18 Manuel utilisateur

Velleman

Velleman CAMSET31 Manuel utilisateur

Velleman

Velleman AVMOD16N1 Manuel utilisateur

Velleman

Velleman HAM2828 Manuel utilisateur

Velleman

Velleman CCTVPROM8 Manuel utilisateur

Velleman

Velleman CAMSET2C Manuel utilisateur

Velleman

Velleman CCTVPROM13 Manuel utilisateur

Velleman

Velleman CCTVPROM16 Manuel utilisateur

Velleman

Velleman DWH G955 Manuel de service

Velleman

Velleman ISPROM1 Manuel utilisateur

Velleman

Velleman CAMSET13 Manuel utilisateur

Velleman

Velleman Camcolbul12 Manuel utilisateur

Velleman

Velleman HAMPAG Manuel utilisateur

Velleman

Velleman K8093 Manuel utilisateur

Velleman

Velleman PEM7D Manuel utilisateur

Velleman

Velleman CAMZWEXT3N Manuel utilisateur

Velleman

Velleman CCTVPROM12 Manuel utilisateur

Velleman

Velleman DWH Series Manuel de service

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur