Velleman DTO2234 Manuel utilisateur

DTO2234 Digital Photo Tachometer

User Manuel

Gebruikershandleiding

Manuel d’Utilisation

DTO2234 GB1

1.FEATURES

•Measuring RPM is safe & accurate without attachment to object.

•Wide measuring range & high resolution

•Digital display gives exact RPM with no guessing or errors.

•Uses the exclusive MICRO-COMPUTER LSI-circuit and crystal time base to

offer high accuracy measurement & fast measuring time.

•The last value / max. value / min. value will be automatically stored in memory

and can be obtained by pressing MEMORY CALL BUTTON.

•The use of durable, long-lasting components, including a strong, light-weight

ABSplastic housing assures maintenance free performance for many years. The

housing has been carefully shaped to fit comfortably in either hand.

2. SPECIFICATIONS

Display : 5 digits, 10mm (0.4") LCD (Liquid Crystal Display) with

function annunciation

Test Range : 5 to 100000 RPM

Resolution : 0.1 RPM (0.5 to 999.9 RPM)

1 RPM (over 1000 RPM)

Accuracy : ±(0.05% + 1 digit)

Sampling Time : 1 sec. (over 60 RPM)

Test Range Select : Automatic

Memory : Last value, Max. value, Min. value

Detecting Distance : 50 to 150mm (2" to 6"), typical max. 300mm (12"),

depending upon ambient light

Time Base : Quartz crystal

Circuit : Exclusive one-chip of microcomputer LSI circuit.

Batteries : 4 x 1.5V AA (UM-3) batteries

Power consumption : Approx. 150mA (operation)

Operation Temp. : 0 to 50°C (32 to 122°F)

Size : 191 x 72 x 38mm (7.5" x 2.8" x 1.5")

Weight : 250g (0.55 lb) (including batteries)

Accessories : Carrying case : 1 pc

Reflection tape marks (600mm) : 1pc

Operation manual : 1pc

DTO2234 GB2

3. FRONT PANEL DESCRIPTIONS

4. MEASURING PROCEDURE

Apply a reflective mark to the object being measured. Depress the MEASURE

BUTTON (5) and align the visible light beam (2) with the applied target. Verify

that the MONITOR INDICATOR (3) lights up when the measuring stabilises

(about 1 to 2 seconds).

1. Reflective mark

2. Signal light beam

3. Monitor indicator

4. Display

5. Measure button

6. Memory call button

7. Battery compartment / cover

DTO2234 GB3

5. MEASURING CONSIDERATION

5.1 REFLECTIVE MARK

Cut and peel the adhesive tape provided into approx. 12mm (0.5") squares and

apply one square to each rotation shaft.

a. The non-reflective area must always be larger than the reflective area.

b. If the shaft is normally reflective, it must be covered with black tape or paint

before attaching reflective tape.

c. The shaft surface must be clean and smooth before applying reflective tape.

5.2 VERY LOW RPM MEASUREMENT

It is easy to get high resolutions and a fast sampling time. If you want to measure

very low RPM values, we suggest you to attach more "REFLECTIVE MARKS"

dividing the area equally. Then divide the reading shown by the number of

"REFLECTIVE MARKS" to get the real RPM.

5.3 REMOVE BATTERIES

If the instrument will not be used for an extended period, remove the batteries.

6. MEMORY CALL BUTTON OPERATION

6.1 A readout (the last value, max. value, min. value) obtained immediately before

turning off the MEASURING BUTTON is automatically memorised. For

example, please refer to figure 2 below.

Measuring Time

Max Value

Min Value

Last Value

Display

Reading

DTO2234 GB4

6.2 The memorised value will be displayed on the indicator when :

A. First push - To display the last value :

"LAST" and "the last value" will be displayed by turn.

B. Second push - To display the maximum value :

"MAX" and "the max. value" will be displayed by turn.

C. Third push - To display the minimum value :

"MIN" and "the min. value" will be displayed by turn.

7. REPLACING BATTERIES

1. When it is necessary to replace the batteries (battery voltage less than approx.

4.5V), "LO" will appear on the display.

2. Slide the battery cover (7) away from the instrument and remove the batteries.

3. Install the batteries (4 x 1.5V AA/UM-3) correctly into the case. Permanent

damage to the circuit may result from incorrect installation.

Table des matières

Autres manuels Velleman Instrument de mesure

Velleman

Velleman ED610D1 Manuel utilisateur

Velleman

Velleman PCSU1000 Instructions de montage

Velleman

Velleman CTC1000DS Manuel utilisateur

Velleman

Velleman DEM301 Manuel utilisateur

Velleman

Velleman DVM123 Manuel utilisateur

Velleman

Velleman AVM52ERT Manuel utilisateur

Velleman

Velleman TA21 Manuel utilisateur

Velleman

Velleman WS8461 Manuel utilisateur

Velleman

Velleman DCM140 Manuel utilisateur

Velleman

Velleman DEM202 Manuel utilisateur

Velleman

Velleman EMDIN03 Manuel utilisateur

Velleman

Velleman INDC003 Manuel utilisateur

Velleman

Velleman DEM900 Manuel utilisateur

Velleman

Velleman Personal Scope HPS10 Manuel utilisateur

Velleman

Velleman DVM 68 Manuel utilisateur

Velleman

Velleman DCM267 Manuel utilisateur

Velleman

Velleman NETBPEM2 Manuel utilisateur

Velleman

Velleman DTO6234N Manuel utilisateur

Velleman

Velleman DVM830L Manuel utilisateur

Velleman

Velleman EMDIN01 Manuel utilisateur

Velleman

Velleman PEREL E305DO2-GN Manuel utilisateur

Velleman

Velleman DCM267N Manuel utilisateur

Velleman

Velleman DVR4H3 Manuel utilisateur

Velleman

Velleman AVM2050 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur