Vaxcel T0449 Manuel d'instructions

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

.stnemeriuqergnidnuorgdnagniriwrofsedoclacirtcelelacoltlusnoc,gnillatsnierofeB.1:SETON

2. READ AND SAVE THESE INSTRUCTIONS.

T0449

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

181017

Hex Nut (F)

Washer (G) Rubber Pad (H)

End Cap (I)

Fitter Screw (A) Wire Connector (B)

Hardware Package (inculded):

Turn off the power at fuse or circuit box.

Installation Steps

Bulb Type B MAX 60W

(not included)

Handle

Roundhead Screw

Flathead Screw

Fixture body

Socket Tube

Cover Assembly

Fitter Screw (A)

Grounding Wire

Wire Connector (B)

Post

1. Unscrew the roundhead screws and

flathead screws to remove the handle from

the cover assembly and to remove the

cover assembly from the fixture body.

2. Place the socket tubes onto the sockets

to cover the sockets completly.

3. Install bulbs (not included). See relamping

label at socket area or packaging for

maximum allowed wattage.

4. Restore the handle and cover assembly

to the fixture body by the roundhead screws

and flathead screws.

5. Unscrew the fitter screws (A) to remove the

fixture body away from the fitter.

6. Pull out the wires and grounding wire from the post.

Make wire connections using the wire connectors (B):

---The black wire from the fixture to the black

wire from the post.

---The white wire from the fixture to the white wire

from the post.

---The grounding wire from the fixture to the

grounding wire from the post.

Carefully put the wires back into the post.

IMPORTANT:

The sensor has an excellent photocell

function to enable the light to turn on

at dusk and off at dawn automatically.

181017

1. Attach the nipple (D) to the mounting strip (A), then secure it with a washer (G) and hex nut (F).

2. Attach the mounting strip (A) to the outlet box by using two mounting screws (B).

3. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using the wire

connectors (F):

---The black wire from the fixture to the black wire from the power source.

---The white wire from the fixture to the white wire from the power source.

---Attach the fixture grounding wire to the mounting strip (A) with the green grounding screw (E). Then connect it to

the house grounding wire with a wire connector (F).

Carefully put the wires back into the outlet box.

4. Attach the fixture to the mounting strip (A) by inserting the nipple (D), then secure it with the rubber pad (H) and end

cap (I).

CAUTION: With silicone caulking compound, caulk completely around where the back plate meets

with the wall surface to prevent water from seeping into the outlet box.

5. Install a bulb (not included). See relamping label on socket area or packaging for maximum allowed wattage.

Turn on the power at fuse or circuit box.

1. Turn off the power at fuse or circuit box before starting installation.

2. Unscrew the three set screws to remove the plate from the fitter.

3. Loosen the wire connectors connected with the wires from photocell. (See Fig.1)

Note: Do not move the photocell to prevent water from seeping into the post.

4. Take a white pigtail and black pigtail and make wire connections using wire connectors (B): (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the post.

5. Restore the plate to the fitter by using three set screws.

Photocell

White Wires From

Photocell

Wire Connector

Black Wire From

Fixture

Wires From Fixture

Wires From

Main Power

Wire Connector (B)

White Pigtail

Pigtail

Red Wires From

Photocell

Black Wires From

Photocell

Operation the Unit Without Photocell

Fig.1 Fig.2

White Wire From

Fixture

Plate

Set Screw

The following parts are available for re-order if damaged or missing.

Fitter Screw (A) Wire Connector (B)

Socket Tube

1089C

Mounting Hardware

6012MM(1 SET)

Spare Parts List:

A: 10"

B: 25"

7. Place the fitter on the top of the post, and then secure it with fitter screws (A).

CAUTION: With silicone caulking compound, caulk completely around where the fitter meets with the post

surface to prevent water from seeping into the post.

Autres manuels Vaxcel Éclairage extérieur

Vaxcel

Vaxcel Chatham Manuel d'instructions

Vaxcel

Vaxcel T0112 Manuel utilisateur

Vaxcel

Vaxcel T0620 Manuel d'instructions

Vaxcel

Vaxcel T0572 Manuel d'instructions

Vaxcel

Vaxcel T0637 Manuel d'instructions

Vaxcel

Vaxcel T0085 Manuel d'instructions

Vaxcel

Vaxcel T0321 Manuel d'instructions

Vaxcel

Vaxcel T0702 Manuel d'instructions

Vaxcel

Vaxcel T0062 Manuel d'instructions

Vaxcel

Vaxcel T0496 Manuel d'instructions

Vaxcel

Vaxcel T0696 Manuel d'instructions

Vaxcel

Vaxcel T0461 Manuel d'instructions

Vaxcel

Vaxcel T0099 Manuel d'instructions

Vaxcel

Vaxcel T0258 Manuel d'instructions

Vaxcel

Vaxcel T0717 Manuel d'instructions

Vaxcel

Vaxcel Proline T0429 Manuel d'instructions

Vaxcel

Vaxcel T0649 Manuel d'instructions

Vaxcel

Vaxcel T0692 Manuel d'instructions

Vaxcel

Vaxcel T0165 Manuel d'instructions

Vaxcel

Vaxcel T0575 Manuel d'instructions

Vaxcel

Vaxcel T0479 Manuel d'instructions

Vaxcel

Vaxcel T0435 Manuel d'instructions

Vaxcel

Vaxcel T0594 Manuel d'instructions

Vaxcel

Vaxcel T0700 Manuel d'instructions

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur