Vaultek VT20i Manuel utilisateur
CLICK HERE FOR ACCESS
Table of Contents
Introduction / Warnings 01 / 02
Battery Installation 03
Charging the Battery 04
Battery Maintenance 05
Master Code Programming 06
Product Registration 07
Biometrics / Programming 08 / 11
Helpful Programming Tips 08
Programming 1st and 2nd Fingerprints 09
Programming Additional Fingerprints 10
Deleting Fingerprints 11
Hot Keys 11 / 12
Tamper Detection 11
Stealth Mode 11
Travel Mode 11
View Battery Status 12
Delete Fingerprints 12
Toggle Interior Light ON/OFF 12
Vaultek™ App 13 / 14
Securing Your Safe 15
Customer Support / Warranty 16
FAQ 17 / 18
Box Contents
VT20i Vaultek™ Safe
18650 Rechargeable Lithium-ion Battery
AC Power Adapter and Micro-USB Charging Cable
High Strength Steel Security Cable
Hardware Mounting Kit
Owner's Manual / Quick Start Guide
Backup Keys (2)
Phillips Head Screwdriver
Installing Your Battery
How to Register Your Safe
Change Your Master Pin Code
How to Program Your Fingerprint
Overview of the Bluetooth App
How to Anchor Your Safe
Hot Keys Available
More videos online.
Vaultek™ App!
The Vaultek™ app is available for Android and iOS devices. The app allows you to remotely unlock safe, check
battery level, toggle sound ON/OFF, adjust the interior light, name ngerprint IDs, plus much more. See pages 13
to 14 for more information.
How-To-Videos
HOW-TO-VIDEOS AVAILABLE CLICK HERE FOR ACCESS
Introduction
The Vaultek™ VT20i is a biometric, PIN access / Bluetooth access safe. Its solid structure and penetration resistant
design makes it ideal for storing valuables such as rearms, jewelry, cash and other personal items. Powered by a
rechargeable lithium-ion battery, the VT20i combines high security with complete access control.
Secure Access: How to open your Vaultek™ Safe.
Biometric Scanner: Personalized access for up to 20 unique ngerprints. See pages 08 to 11 for more
information.
Keypad: The numeric keypad responds quickly for rapid access and has a built-in proximity sensor that lights up
when your hand brushes against the safe. See page 06 for more information.
Vaultek App: Open the safe with the Bluetooth app. See pages 13 and 14 for more information.
Key: Two keys are provided for manual access to the safe in the event the battery dies.
Secure Defense: How your Vaultek™ Safes keeps people out.
Anti-Impact Latches: Built to withstand forceful impacts and heavy slams.
Unibody Construction: Our unibody design is extremely strong without welds or weak points.
No External Access Points: A combination of interior mounted hinges and anti-pry reinforcement bars help
prevent unwanted tools from attempting to break the safe open.
Security Sleep Mode: Activates when six (6) consecutive incorrect keypad entries are entered and does not
accept any entries for two minutes. If a button is pressed during this mode, all of the numbers will ash RED and
the alarm beeps. A backup key or programmed ngerprint may be used to open the safe.
ALWAYS check to make sure door has latched when closing; lid requires a rm press.
DO NOT get the ngerprint sensor area wet.
HOW-TO-VIDEOS AVAILABLE CLICK HERE FOR ACCESS
Battery Installation
To get started, insert one of your backup keys into the keyhole at the front of the safe (see Figure A). Push key in
and rotate the key 90 degrees clockwise to open the safe.
Remove crate foam insert. Locate the battery compartment door on the inside of the safe directly behind the '1'
key on the keypad (see Figure B).
Using the Phillips screwdriver provided open the battery cover by removing the single screw in the top center of
the battery cover.
Insert the 18650 rechargeable lithium-ion battery (included in box) into the battery compartment. Note that your
Vaultek™ safe automatically detects the polarity of the battery and can be installed in either direction.
When the battery is inserted you will hear a short welcome tone and the keypad will light up.
Once you hear the tone and see the keypad lights up, replace the battery cover and screw. You are now ready to
program your safe. See page 06.
4
5
6
Charging the Battery
Your Vaultek™ safe is powered by a rechargeable lithium-ion battery and comes with a charging kit which
includes an AC power adapter (suitable for 120 volt power outlets) and a micro-USB cable. Safe and
micro-USB cable can be used with all international power adapters.
Under normal usage, the battery can last at least 4 months. To recharge the safe, plug the micro-USB cable into
the micro-USB receiving jack located on the lower right side of the safe (Figure C) and connect to a standard USB
port or wall outlet using the AC power adapter. Approximate recharge time is 2.5 hours. During recharging, the
white LEDs above the micro-USB jack (Figure C) indicate the battery capacity as below:
4 lights glow: Fully recharged
3 lights glow, 1 light blinks: 80%~100%
2 lights glow, 1 light blinks: 60%~80%
1 light glows, 1 light blinks: 40%~60%
1 light blinks, less than 20%
The charging kit can also function as an external power
supply, which means you can open your safe even when
the battery is depleted.
IMPORTANT
After installing the battery, use the charging kit provided to charge the unit 100%.
HOW-TO-VIDEOS AVAILABLE CLICK HERE FOR ACCESS
05 Vaultek™ VT20i
Battery Maintenance
Testing the Battery Power
To check the battery level, press and hold the '5' button on the keypad (3 seconds). The button from '1' to '4' will
glow GREEN or RED to indicate the battery level:
Remaining Battery Capacity Level
If 4 digits glow green: 80%-100%
If 3 digits glow green: 60%-80%
If 2 digits glow green: 40%-60%
If 1 digit glows green: 20%-40%
If 1 digit glows red: 2%-20%
If 1 blinks red: less than 2%
Low Battery
If '1' button on the keypad blinks 5 times and you hear a beep when opening the safe, your battery level is
critically low and your safe needs to be charged immediately.
IMPORTANT
Replace the battery with a 18650 rechargeable lithium-ion battery when one or more of the following occurs:
A) all four of the white lights above the micro-USB jack are blinking or B) it takes more than 4 hours to recharge
the battery. (Refer to the "Battery Installation" section for instructions).
The adapter used to charge the battery should output 5V/1000mA or above the using micro-USB.
Press and hold the "PROGRAM" button again (3
seconds) until all keys (1-5) light up RED and let go.
Enter your NEW master code a second time.
Press and hold the "PROGRAM" button a third time
(3 seconds) until the safe beeps and let go. This tone
conrms that the password has been reset.
If you make a mistake and the new code will not work,
simply start over with step 2.
Master Code Programming
First time users should change the default code as soon as possible to prevent unauthorized access to your safe.
You will also use this master code in the Vaultek™ app on your smartphone, so it should be kept condential.
TIP: Code Requirements
Your code can be a minimum of 4 and a maximum of 8 keypad entries.
Two keys cannot be pressed simultaneously.
Programming a new code will overwrite your previous code.
Enter default code 1-2-3-4-5 on the keypad to open the safe.
With the safe open, press and hold the "PROGRAM" button (3 seconds) (Figure D) until all keys (1-5) light up RED
and let go.
Enter your NEW master code.
06 Vaultek™ VT20i
•
•
•
PROGRAM
HOW-TO-VIDEOS AVAILABLE CLICK HERE FOR ACCESS
Table des matières
Autres manuels Vaultek Autre
