Vasco DIGIPASS DP 260 Manuel utilisateur
DIGIPASS DP 260
USER MANUAL
Contents
1. What is DIGIPASS?
2. How to activate the DIGIPASS and how to enter
3. How to use DIGIPASS?
EN DIGIPASS DP 260
1. What is DIGIPASS?
DIGIPASS DP 260 is password-protected customer personal
-
ments for remote banking services. DIGIPASS represents an elec-
tronic device, which generates unique test-key (substitution to
Access to all functional capabilities of DIGIPASS DP 260 is pro-
vided after entering of 5 - digit PIN-code. At handing over of DI-
GIPASS device, the Bank provides the customer with initial PIN
– code, which must be changed to customer personal PIN – code
by the customer him/herself.
are unpredictable, non- reproducible, time - dependant and
unique device - based codes. The value of the code, after its con-
trol at the Bank is not subject to repeated use.
Symbols used in the device
_ _ _ _ _ NEW PIN enter new PIN-code
_ _ _ _ _ PIN CONF
_ _ _ _ _ NEWPINCONF
_ _ _ _ _ PIN enter PIN-code
APPLI _ choose the function
FAIL failure
LOCK PIN DIGIPASS has been blocked
EN DIGIPASS DP 260
2. How to activate DIGIPASS
device and how to enter and to
change the PIN-code?
At handing over of DIGIPASS device to the customer, the Bank
has assigned to it an initial PIN-code, which should be changed
1. Switch-on the device by pressing the button .
2. _ _ _ _ _ PIN will appear on the screen.
Enter the initial PIN-code, provided by the Bank.
3. _ _ _ _ _ NEW PIN will appear on the screen.
Enter the new PIN-code.
4. _ _ _ _ _ PIN CONF will appear on the screen.
choice.
5. _ _ _ _ _ NEW PIN CONF and APPLI_ will appear on the
thus enabling you to choose any of the DIGIPASS functions.
If the new PIN-code will be entered incorrectly, FAIL will appear
the PIN-code.
3. How to use DIGIPASS?
Activation of the device
1. Press .
2. Enter your PIN-code after _ _ _ _ _ PIN will appear on the
screen. Wrongly entered input of data may be corrected by
deleting the last digit by pressing , as well as switching
3.
APPLI_ on the screen. Then you may choose any of the
necessary functions.
By pressing“1”, the 8 – digit Access code will be generated, to al-
low you to open access to the internet-bank Multinet. This func-
-
cation with the Bank’s employee. You simply name the 8-digit
Access code is valid for 30 minutes from the moment of its gen-
eration.
By pressing“2”, the Authentication code will be provided to con-
By pressing “2”, you will receive prompt “1______” on the
by the system on signing of the order. After that you will receive
prompt“2______” on the screen. Enter the second generated
6-digit code. Then DIGIPASS will provide you with 8-digits code
for entering into the system.
EN DIGIPASS DP 260
AUD
360 000
JPY
392 000
BYR
112 000
CAD
124 000
CHF
756 000
NOK
578 000
CZK
203 000
PLN
985 000
DKK
280 000
RUB
643 000
EUR
978 000
SEK
752 000
UAH
980 000
GBP
826 000
USD
840 000
000 000
(Australian dollar)
(Byelorussian
ruble)
(Canadian d
ollar)
(Swiss franc)
(Czech koruna)
(Danish krone)
(Euro)
(English pound)
(Japanese y
en)
(Norwegian krona)
(Polish zloty)
(Russian ruble)
(Swedish krona)
(Ukrainian grivna)
(USA dollar)
Other currencies
By pressing “3”, you will be able to receive Authentication code,
necessary for the submission of the documents by fax.
Generation of the signature for Fax documents
1. Switch on the device.
2. Enter the PIN-code.
3. Press the button “3”. “1_ _ _ _ _ _”will appear on the screen.
r
oundups). If amount v
alue is less than 6 digits, nec
essary to input
rest values as zero (0). Example: payment amount is 777.12.
Necessary to input in Digipass 777000 value.
5. Press and hold until “2_ _ _ _ _ _” will appear on the screen.
6. Enter the currency code (see the table).
7. Enter and hold until “3_ _ _ _ _ _” will appear on the screen.
note). The device will generate 8-digit Authentication code.
9. Make sure, that you have determined time, when the Authenti-
The time has to be Riga local time.
EN DIGIPASS DP 260
Note
•If the account number does not contain more than 6
digits and no other symbols, the whole account number
should be entered. Press and hold until the 8-digit
Authentication code will appear on the screen.
•If the account number contains more than 6 digits, only the
last 6 of them should be entered.
Example, 123456789112233445 should be changed to
233445.
•
digit symbols, only 6 digits should be entered (last 6, if there
are more than 6 digits).
Example, 12A3B4567890C123 should be changed to 890123.
Change of the PIN-code
1. When the device is switched-on and APPLI_ is on the screen,
press and hold as long as _ _ _ _ _ NEW PIN will appear
on the screen.
2. Enter the new PIN-code. After _ _ _ _ _ PIN will appear on
the screen, re-enter the same PIN-code.
_ _ _ _ _ NEW PIN CONF
of the PIN-code.
The device may be switched of by pressing . The device will
switch of automatically if no actions will be taken during 25-30
Provide safety of your DIGIPASS device and do not allow
anybody to have access to your PIN-code.
It is forbidden to disassemble DIGIPASS device on physical
In cases of week battery, you will not be able to manage
your account, if no alternative means of authentication
(for instance code card) are at your disposal.
If you have lost your DIGIPASS or it has been stolen, inform
the Bank immediately. In order to receive new DIPIASS
device, you have to visit the Bank or its representative
seconds.
Table des matières
Autres manuels Vasco Terminal tactile
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
