Vaporesso Target MINI II Kit Manuel utilisateur

User Manual

Target MINI II Kit

1English

Thank you for choosing Vaporesso product. Please read this manual

carefully before using to ensure best experience. If you require additional

information or have any question about this product, please contact our

local distributors or contact us through website: www.vaporesso.com

Target MINI II with VM Tank 22.

SPECIFICATION

Target mini II MOD:

• Dimensions: 37.2 *25.7*63.0mm

• Net weight: 112g

• Output wattage: 5~50W

• Resistance: 0.03~5Ω

• Battery: 2000mAh Built-in

• Charging current: 2A/5V

• Display: 0.66" OLED

• Battery Compatibility: 510

VM Tank 22 :

• Dimensions: ø22.2*48.7mm

• Capacity: 2ml

• Coil and Recommended wattage:

EUC CCELL Coil:

1.0 Ω,10~13W(pre-installed)

EUC MESHED Coil :

0.6 Ω,16~22W

Drip Tip

Air adjustment

ring

Fire button

OLED screen

Mode/ conrm

USB port

Up(+) button

Down(-) button

VM Tank

ENGLISH

2 3English English

USE INSTRUCTION:

2) Main screen

3) Lock and unlock buon:

• Continually 5 press of re to turn on and off

• Continually 3 press of re to unlock/lock.

• Continually 3 press of mode to lock/unlock mode

button.

4) Choose your mode

• VW-H /VW-N /VW-S (Variable Wattage mode - high/normal/soft): it will automatically select the adequate

average wattage for your atomizer If you switch between different ohms resistance.

• CCW (Custom Curve of Wattage mode): To use the up and down buttons to customize you own curve of wattage

output line ,move to the next bar with a quick press of the re button,press the mode button to save and exit

when setting is done.

• SP (Super Player mode): In this mode, it will support broader resistance range from 0.03Ω to 5Ω, which is

adaptive to mainstream RDA tanks.

• VV(Variable Voltage mode): You can manualy adjust the voltage to match the resistances of the coil you use, the

higher resistance of the coil you use, the higher voltage it require correspondingly.

• CCV (Custom Curve of Voltage mode): In this mode, you can use the up and down buttons to customize you own

curve of voltage line ,move on to the next bar with a quick press of the re button , press the mode button to save

and exit when all modications are done.

• SS/NI/TI : Variable temperature control mode for Stainless Steel/Nickel/Titanium material (Auto Function

enabled). the device can separately support Nickel 200, Titanium, and Stainless Steel coils smartly , it will

intelligently adjust temperature control parameters based on the heating wire material's resistance value you use,

also it allows you to change the startup wattage.

• M1/M2 (Temperature Coefcient of Resistance) You can choose your own manual setting and set the TCR at

1) Filling the E-juice and install tank.

Uncrew the drip tip directly, then you can ll your favorite

E-juice through the opening.and following below to replace

coil or galss.

Filling E-Juice Replace coil Replace glass

321

battery level Mode

Setting value

Instant Voltage/

wattage

coil

resistance

value

puff counter Last vaping duration

2 3English English

USE INSTRUCTION:

2) Main screen

3) Lock and unlock buon:

• Continually 5 press of re to turn on and off

• Continually 3 press of re to unlock/lock.

• Continually 3 press of mode to lock/unlock mode

button.

4) Choose your mode

• VW-H /VW-N /VW-S (Variable Wattage mode - high/normal/soft): it will automatically select the adequate

average wattage for your atomizer If you switch between different ohms resistance.

• CCW (Custom Curve of Wattage mode): To use the up and down buttons to customize you own curve of wattage

output line ,move to the next bar with a quick press of the re button,press the mode button to save and exit

when setting is done.

• SP (Super Player mode): In this mode, it will support broader resistance range from 0.03Ω to 5Ω, which is

adaptive to mainstream RDA tanks.

• VV(Variable Voltage mode): You can manualy adjust the voltage to match the resistances of the coil you use, the

higher resistance of the coil you use, the higher voltage it require correspondingly.

• CCV (Custom Curve of Voltage mode): In this mode, you can use the up and down buttons to customize you own

curve of voltage line ,move on to the next bar with a quick press of the re button , press the mode button to save

and exit when all modications are done.

• SS/NI/TI : Variable temperature control mode for Stainless Steel/Nickel/Titanium material (Auto Function

enabled). the device can separately support Nickel 200, Titanium, and Stainless Steel coils smartly , it will

intelligently adjust temperature control parameters based on the heating wire material's resistance value you use,

also it allows you to change the startup wattage.

• M1/M2 (Temperature Coefcient of Resistance) You can choose your own manual setting and set the TCR at

1) Filling the E-juice and install tank.

Uncrew the drip tip directly, then you can ll your favorite

E-juice through the opening.and following below to replace

coil or galss.

Filling E-Juice Replace coil Replace glass

321

battery level Mode

Setting value

Instant Voltage/

wattage

coil

resistance

value

puff counter Last vaping duration

4 5English English

CAUTIONS:

• Please turn off the device when it is not in use.

• Do not leave the charging device unattended.

• Do not drop, throw or abuse your device, it may cause damage.

• Please use a standard USB output charger in proper charging Current and Voltage range.

• Keep away from water or any flammable gas, liquid .

• Do not exposure to direct sunlight, dust, moisture or mechanical shock.

• Do not exposure the device to extreme temperature. (Applicable temperature range: -10~60 ℃ /14~140 ℉ while

using, 0~+55℃ /32-131 ℉ while charging, -10~45℃ /14~113 ℉ while storing).

• EEE Recycling: the product should not be treated as household waste, instead it should be handed over to the

applicable collection point for the recycling of electrical and electronic equipment.

• Battery Recycling: the product battery should not be treated as household waste, instead it should be handed over

to the applicable used battery collection point for recycling.

• Only have your device repaired by Vaporesso. Do not attempt to repair it by yourself as damage or personal injury

may occur.

different values within proper range, below show the recommend range of the heating material :

• BP (Bypass mode): Direct output voltage mode depends on battery level, supported coil resistance range: 0.05-5ohm.

• SET: System setting ,including DEFAULT/TIME SET/BRIGHTNESS/ PUFF COUNTER/SMART ON OFF/ AUTO ON. OFF/

SCREEN/ VERSION.

• SMART ON/OFF: It is a advanced Variable Wattage mode, when smart function is enable, it can change intensity

according to the coils resistance levels within a safe limit in VW-H/N/S mode.

• AUTO ON/OFF:The Auto function taking away any operation difculties switching between VW-H and VW-N or

between VT-H and VT-N.