OPERATING INSTRUCTIONS
llawehT.erutxifehtfopotnollecotohpelbatsujdanahtiwdedivorpsithgiLnwaD-ot-ksuDruoY
.ylreporpetarepootllecotohpnwaDotksuDehtrofnoitisopNOehtniniamertsumhctiws
For Dusk to Dawn operation, adjust the photocell knob so that photocell window is fully open (you
will be able to see the photocell circuit through the small opening in the knob). In this mode of
.gninromtxenehtniagaffonrutdnathgintanoemoclliwthgileht,noitarepo
As an alternative to the Dusk to Dawn operation, the light fixture can be operated by a wall switch
as an ON/OFF light fixture. The photocell will need to be adjusted so that the photocell window is
completely covered.
NOTE: semittnereffidtaetavitcathgimdna,emitton,thgiltneibmagnitcetedybkrowsllecotohP
tcaeryamr
ehtohcaeraensthgil,yltnereffidtcaeryamnoitacolynanillecotohphcaE.yadhcae
llecotohprofemitgaltrohsasierehT.semittnereffidtaFFOogroNOemocdnayltnereffid
ehtgnirudtsetoT.gnitsetnehwemitnoitcaersetunimfoelpuocawollaoterusebosnoitavitca
day completely cover photocell with a cloth, cardboard, tape, etc. Photocell operation can be
ehtfoerutxetdnaroloc,egailofybraen,sgnahrevomorfedahs,snosaes,sduolcybdetceffa
.deviecerthgilfotnuomaehtstceffatahtnoitidnocrehtoynaroecafrusgnitnuom
NOTE: This Dusk-to-Dawn Light is provided with a 70-watt metal halide type M98/E bulb. When
turning on it will take several minutes for the bulb to reach full brightness.
Photocell operation.
Bulb Replacement. See installation step 6
WARNING: Your Dusk-to-Dawn Light is designed to operate safely with a 70-watt metal halide
.ylnoblubE/89MepytedilaHlateMttaw-07ahtiwecalpeR.blubE/89Mepyt Installation
of any other bulb type may cause damage to the fixture.
8
erofebxobesufrorekaerbtiucricehttafforewopnruT:REGNAD
replacing bulb.
.rewopffonrutotenolahctiwsllawnoylerTONOD:REGNAD
ON
ON
ON
OFF
ON
ON
ON
ON
FF
O
nepOylluF Fully Closed Fig. 9
Lowes.com
