USAVision UA-XVR1620 Manuel utilisateur
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual forfuture use. UVSUAAI-QG-A
Quick Start Guide
UA-XVR1620
© 2022 USAVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without
the written consent of USAVision.
Every effort has been made to ensure that the information in this manual is accurate.
USAVision makes no expressed or implied warranty of any kind and assumes no
responsibility for errors or omissions. No liability is assumed for incidental or
consequential damages arising from the use of the information or products contained
herein. Features and specifications are subject to change without notice.
USA Vision Systems Inc.
9301 Irvine Blvd,
Irvine, CA 92618, USA
Tel: +1-949-421-5910
Fax: +1-949-583-152
https://www.geovision.com.tw/us/
September 2022
Scan the following QR codes for product warranty and technical support policy:
[Warranty] [Technical Support Policy]
Contents
1. Introduction.........................................................................................................1
1.1 Packing List............................................................................................................1
1.2 Overview ................................................................................................................2
1.2.1 Rear View ................................................................................................................. 2
1.2.2 Rear View ................................................................................................................. 3
2. Installation...........................................................................................................4
2.1 HDD Installation......................................................................................................4
2.2 Connection Diagram...............................................................................................5
2.3 Power Supply Connection.......................................................................................5
3. Getting Started....................................................................................................6
3.1 Start Wizard............................................................................................................6
3.1.1 Start Wizard .............................................................................................................. 6
3.1.2 Connecting IP Cameras............................................................................................ 6
3.2 Live View Overview ................................................................................................8
3.2.1 Main Window ............................................................................................................ 8
3.2.2 Task Menu Bar........................................................................................................10
3.2.3 Camera Quick Toolbar............................................................................................ 10
4. Remote Access via Web Client........................................................................12
4.1 Basic System Requirements.................................................................................12
4.2 Looking Up the Dynamic IPAddress.....................................................................13
4.3 Web Client Manager Live Interface.......................................................................14
5. Upgrading Firmware.........................................................................................20
1
1. Introduction
Welcome to the UA-XVR1620 Quick Start Guide. In the following sections, you will learn
about the basic installations and configurations. For more details, see UA-XVR1620 User’s
Manual.
1.1Packing List
UA-XVR1620
Audio Cable
3.5”HDD screw kit x 2
USB Mouse
2.5”HDD screw kit x 2
Power Adapter (DC 12V, 5, 60W)
Rack Mount x 2
Power Cord
Screw for Rack Mount x 2
Download Guide
2
1.2Overview
1.2.1 Rear View
Item
Description
Power LED
Show constant green when power is supplied.
HDD LED
Blink red when the HDD is writing or reading data.
No LED when no HDD is installed.
USB port
Connect the supplied mouse or USB flash memory.
3
1.2.2 Rear View
Item
Description
e-SATA
Connect to e-SATA HDD for recording & backup.
Audio Input (1-4)
Connect with audio input signals, RCA port.
Audio Input (5-16)
Connect to the input ports with supplied connector.
CVBS
Connect to your TV or monitor, BNC port.
Audio Output
Audio signal output, RCA port.
Video Input
Connect with video input devices, BNC port.
VGA
Connect to your TV or a monitor with VGAinput.
RS-485
Connect to PTZ devices.
Sensor & Alarm
Optional. Connect to external sensor & alarm devices.
HDMI
Connect to your digital TV or monitor with HDMI input.
LAN
Connect to your home network.
USB port
Connect the supplied mouse or USB flash memory.
Power
Connect to the supplied power adaptor.
Reset
Load default settings of the DVR.
Note: The Reset button is below the USB port. Poke the Reset button
to load default settings.
Power Switch
Turn on / off power supply.
4
2. Installation
2.1 HDD Installation
Follow the instructions below to install the HDD in the DVR for video data storage.
Caution: DO NOT install or remove the hard drive while the power is turned ON.
Note:
1.
The DVR supports 3.5” and 2.5” SATA HDD of up to 10 TB only.
2. The following procedures are for reference only. The practical operation may be
different depending on the model you purchased.
HDD Installation:
(1) Cut power firstly. Unscrew both sides and rearpanel to open the upper cover.
(2) Connect the data and power cables to the HDD and place the HDD on the DVR case.
Carefully flip the DVR case and secure the HDD to the DVR with screws.
5
2.2 Connection Diagram
2.3Power Supply Connection
Caution: Use only the supplied power adapter of the DVR.
Connect one end of the power adapter to the power connector on the back of the DVR. Plug the
other end of the power adapter into the wall outlet.
For specific models, press the Power Switch to turn on the power.
Speaker
6
3. Getting Started
3.1 Start Wizard
3.1.1 Start Wizard
Click Start Wizard to proceed to the next step.
3.1.2 Connecting IP Cameras
After finishing setting Network Configuration and Date and Time, this page appears.
7
Click Search to search IP cameras in the same network. Choose the IP camera(s) you want
to add, and then click icon to add to the DVR. Or, click button to manually add
individual IP camera to a single channel.
◼IP Address/Domain: IP address or domain name of the IP camera.
◼Alias: Name of the IP camera.
◼Port: Port of the IP camera.
◼Protocol: Choose the protocol of the IP camera from the dropdown menu.
◼User Name: User Name of the IP camera.
◼Password: Password of the IP camera.
Note:
1. The system fills in the ID and password using admin/admin by default. Make sure to
enter the correct ID and password of the IP cameras when adding them to the DVR.
2. The default password is 123456 for the following IP camera models: UA-B20004F /
UA-B40004F / UA-B4000VF-S / UA-D20002F / UA-D40002F / UA-D4000VF-S /
UA-R40002F-SA. To modify the password on the camera’s Web interface, refer to
Network Cameras User Manual for details.
Table des matières
Autres manuels USAVision Matériel réseau
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
