US Robotics 9108 Manuel utilisateur
1
Wireless MAXg ADSL Gateway
Quick Installation Guide
Guide d'installation rapide
Installationsanleitung
Guida all'installazione rapida
Guía breve de instalación
Beknopte installatiegids
Kurulum Kõlavuzu
Οδηγός γρήγορης εγκατάστασης
Pokyny k instalaci naleznete v uživatelské prírucce na instalacním disku CD-ROM.
A telepítési utasításokat lásd a telepíto CD-ROM Felhasználói kézikönyvében.
Instrukcja instalacji jest dostepna w podreczniku uzytkownika na dysku instalacyjnym
CD-ROM.
Para obter instruções de instalação, consulte o Manual do Utilizador no CD-ROM de Instalação.
Инструкции по установке см. вруководстве пользователя на установочном компакт-
диске.
Installationsanvisningar finns i användarhandboken på installationsskivan.
R24.0705.00
rev 1.8 03/07
Wireless MAXg ADSL Gateway Installation ..............................3
Installation de la passerelle Wireless MAXg ADSL Gateway ...19
Installation des Wireless MAXg ADSL Gateways ......................35
Installazione di Wireless MAXg ADSL Gateway ........................51
Instalación de Wireless MAXg ADSL Gateway ..........................67
Installatie van de Wireless MAXg ADSL Gateway .....................83
Wireless MAXg ADSL Gateway Kurulumu ..........................99
Εγκατάσταση Wireless MAXg ADSL Gateway ....................115
Cesky
Pokyny k instalaci naleznete v uživatelské prírucce na instalacním disku CD-ROM.
Magyarország
A telepítési utasításokat lásd a telepíto CD-ROM Felhasználói kézikönyvében.
Polska
Instrukcja instalacji jest dostepna w podreczniku uzytkownika na dysku instalacyjnym CD-ROM.
Português
Para obter instruções de instalação, consulte o Manual do Utilizador no CD-ROM de Instalação.
Русский
Инструкции по установке см. вруководстве пользователя на установочном компакт-
диске.
Svenska
Installationsanvisningar finns i användarhandboken på installationsskivan.
3
Wireless MAXg ADSL Gateway Installation
Thank you for purchasing the USRobotics Wireless MAXg ADSL Gateway.
For current product support and contact information, go to the following Web site:
http://www.usr.com/support
NOTE: It is important that you have your serial number written down for future
reference. If you ever need to call our technical support department, you will
need this number to receive assistance. You can find your 12-character serial
number on a bar code sticker located on the bottom of the gateway and also on
the box. You will also need your model number. It is noted below.
Write your serial number in the space provided below.
What You Need Before You Begin
You will need active ADSL and Internet service from your local telephone company or
Internet Service Provider (ISP) before you try to go on the Internet. You may also need the
following from your ISP:
• VPI/VCI values
• ADSL standard (modulation)
• Encapsulation mode
• Authentication (PAP or CHAP) for PPP connections
• Your user name and password, if they were assigned by your ISP.
Gateway Installation
Step 1. Connect Microfilter (if included or required by your ISP)
A microfilter removes interference between voice and DSL signals. Your ISP will determine
if a microfilter is necessary. If a microfilter was not included with the gateway, you may
want to ask your ISP if you need to purchase one or more.
To install a microfilter, plug each device (phone, fax machine, or other telephony device)
into the microfilter, and then plug the microfilter into the telephone wall jack. Do not install
9108
Serial Number Model Number
4
a microfilter on the cable that connects your ADSL gateway to the telephone jack unless
your microfilter has a connection for both the gateway and the phone.
Step 2. Connect the Antenna and Cables
To configure the gateway, you will initially use the supplied yellow Ethernet cable to
connect it to the computer. You can set up a wireless connection later in the installation
process, once the gateway is communicating with the Internet.
This diagram shows you how the devices will be connected when the installation is
complete:
To make the needed connections, follow these steps:
A. Attach the antenna to the back of the gateway.
B. Connect one end of the grey telephone cable to the telephone port on the back of
your gateway (labelled ADSL). Connect the other end to the telephone wall jack.
C. Connect the yellow Ethernet cable. Although you can connect up to four systems this
way, you should connect additional devices only after the initial setup is complete.
Insert one end of the Ethernet cable into one of the ports on the back of the gateway
(labelled 1, 2, 3, and 4). Connect the other end to the Ethernet port on your
computer’s network interface card.
5
D. Plug the AC power adapter into the 9VDC jack on the back of your gateway. Then
plug the AC power adapter into a standard wall outlet. If the LED on the front
panel is not lighted, press the Power switch on the back of the gateway.
NOTEThis product is intended to be supplied by a UL Listed Direct Plug-in
Power Unit marked Class 2 and rated 9V DC, 1200 mA.
The gateway starts up after you turn on the power. This may take one to two
minutes.
E. See if the and any of the indicator LEDs are lighted. If they are not, see the
troubleshooting section later in this guide.
Step 3. Install EasyConfigurator
1. Insert the USRobotics installation CD-ROM into your computer’s CD-ROM drive. The
installation should start automatically. This process may take a few moments.
If the installation does not start automatically, you can start it manually.
Windows Vista users: Click Windows Start >Computer. Double-click the CD drive.
Windows users: Click Start and then Run, then type D:\setup.exe in the dialogue box
and click OK. (If your CD drive uses a different letter, type that letter in place of D.)
Macintosh users: Open the CD-ROM and double click on either MacOS X Install or
MacOS Classic Install (depending on which operating system your computer uses).
Linux users: Open the CD-ROM, browse to \platforms\linux, and double-click on
install.bin.
2. Select your preferred language and click OK.
3. If you are using Windows, the installer runs a qualification test to verify that your
system meets the minimum requirements for installation. When done, a Results
screen displays green flags next to system components that meet requirements and
red flags next to any that do not. If your system passes the qualification, click Next. If
any of your system components do not meet the requirements, click View Report to
identify them.
Setup now installs the EasyConfigurator.
6
Step 4. Configure the Gateway with EasyConfigurator
1. This is the EasyConfigurator login window:
If EasyConfigurator does not start up automatically, you can open it yourself.
Windows Vista users: Click Start and select All Programs and U.S. Robotics
EasyConfigurator.
Windows users: Click Start and select Programs and U.S. Robotics
EasyConfigurator.
Macintosh and Linux users: Double-click on the EasyConfigurator icon on the
desktop.
The user name and password are already entered for you. Click Log In and wait a
few moments.
7
2. This window appears after you log in:
Select your country and your Internet Service Provider (ISP) from the drop-down
lists. If your country or ISP does not appear in the list, select Other and manually
enter the settings provided by your ISP.
You may need to enter your ISP-supplied user name and password after making your
selections. Click Apply to continue.
3. EasyConfigurator now configures your gateway based on your ISP selection or
manually-entered settings.
8
At this point, the system attempts to access the Internet. This may take a few
minutes, until the following status page appears.
If the status is CONNECTED TO THE INTERNET, you have successfully configured
your Internet connection. If it does not say CONNECTED TO THE INTERNET, go to the
Troubleshooting section of this installation guide.
Step 5. Set Up the Wireless Configuration
In wireless communications, devices communicate with each other via radio waves rather
than cables. The gateway can communicate wirelessly with any device that has a wireless
network adapter that meets wireless networking standards.
To set up wireless communications, click Status at the top of the screen (if it is not already
open). Then click Configure Wireless. This opens your Web browser to a page for setting
Autres manuels pour 9108
1
Table des matières
Langues :
Autres manuels US Robotics Porte
US Robotics
US Robotics 9108 Manuel utilisateur
US Robotics
US Robotics USR9108 - U.S. Robotics Wireless MAXg Manuel utilisateur
US Robotics
US Robotics USR9108 - U.S. Robotics Wireless MAXg Manuel utilisateur
US Robotics
US Robotics USR9108 - U.S. Robotics Wireless MAXg Manuel utilisateur
US Robotics
US Robotics Wireless Ndx ADSL2+ Gateway Manuel utilisateur
US Robotics
US Robotics sureconnect Manuel utilisateur
US Robotics
US Robotics USR3520 Manuel utilisateur
US Robotics
US Robotics USR3520 Manuel utilisateur
Manuels Porte populaires d'autres marques
LST
LST M500RFE-AS Manuel utilisateur
Kinnex
Kinnex Media Gateway Manuel utilisateur
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur
Telsey
Telsey CPVA 500 - SIP Manuel utilisateur
