Urmet domus IPerCom Manuel

IPerCom

Hardware installation guide

www.urmet.co.uk

[email protected]

Contents

IPerCom system schematic Page 1

IPerCom combined with iPassan access control system schematic Page 2

Network installation and configuration requirements Page 3& 4

1717/31 or 1717/33 Max Pro Touchscreen Monitor

Controls Page 5

Connections Page 6& 7

Mounting height Page 8

1717/41 or 1717/43 Max Lite Touchscreen Monitor

Controls Page 9

Connections Page 10 & 11

Mounting height Page 12

1060/3 Hands-free Audio Door Phone

Controls Page 13

Connections Page 14 & 15

Mounting height Page 16

1060/13 Elekta, 1060/18 &1060/19 Elekta Steel Call Modules

Connections overview Page 17

Maglock connection example Page 18

Fail safe and fail secure release connection examples Page 19

Interface to iPassan and third party access control systems Page 20

1060/18 & 1060/19 Mounting height Page 21

1060/13Mounting height Page 22

1060/74 Sinthesi Steel Entry Panel

Connections overview Page 23

Maglock connection example Page 24

Fail safe and fail secure release connection examples Page 25

Interface to iPassan and third party access control systems Page 26

Mounting height Page 27

1060/82 Proximity Key Reader

Connections overview Page 28

Maglock connection example Page 29

Fail safe and fail secure release connection examples Page 30

Mounting height Page 31

1060/84 Relay Module Page 32

1060/41 Switchboard Handset Page 33

Notes Page 34

IPerCom schematic

This schematic shows the IPerCom

video entry system with integrated

IPerCom proximity access control

IP Network

Doorbell push button

Panic alarm input

Extension sounder

1717/31

1717/33

1717/41

1717/43

Core cable

1060/82

Lock power supply

Cat5e

Exit switch

Break glass Maglock

1060/84

Core cable

Input 1 - From third party equipment

Output 1 - To third party equipment

Input 2 - From third party equipment

Output 1 - To third party equipment

Lock power supply

1060/74

Core cable

1060/13

1060/18

1060/19

Lock power supply

Maglock

Exit switch

Break glass

Maglock

Core cable

Core

cable

Core cable

Exit switch

Break glass

Core cable

The installation should be installed, tested and documented as per the following standards –

European Committee for Electrotechnical Standardisation (CENELEC)

EN 50173 Information Technology –Generic Cabling Systems

CENELEC also produce the EN50174 series of standards that are concerned with the way in which cabling

systems are designed and installed –

Another relevant CENELEC standard is –

British Standards Institute (BSI)

BSI adopts all CENELEC standards and prefix them with their authority code, i.e. EN 50174-1:2009 +

A2:2004 becomes BS EN 50174-1:2009 + A2:2004

BSI also produces its own national standards –

BS6701:2010 states: All telecomminications cabling and telecomminications equipment shall meet the

requirements of the BS EN 50174 series of standards. This relates to both owners of premises (Clause 4)

and installers of telecomminications cabling and telecomminications equipment (Clause 5). Note that the

use of the word ‘shall’ is prescriptive and as such, a legal requirement.

Urmet recommends adherence to the BS EN 50173 and BS 50174 series of standards, together with the

relevent parts of BS 6701 and BS 7671 to ensure a fully compliant installation that conforms to

Network installation and configuration requirements

EN 50173-1:2011 General

requirements

EN 50173-2:2007 + A1:2010

Office Premises

EN 50173-3:2007 + A1:2010 Industrial Premises

EN 50173-4:2007 + A1:2010

Residential Premises

EN 50173-5:2007 + A1:2010 Data Centers

EN 50173-6:

Distributed Building Services

EN 50174-1:2009 + A2:2004

Specification and Quality Assurance

EN 50174-2:2009 + A2:2004 Installation planning & practices inside buildings

EN 50174-3:2013 Installation planning & practices outside buildings

EN 50310:2010 Application of equipotential bonding and earthing in buildings

with information technology equipment

BS 6701:2010 Telecommunications equipment and telecomminications cabling.

Specification for installation, operation and maintenance.

BS 7671 Requirements for Electrical Installations. IET Wiring Regulations

(18th Edition).

IPerCom with iPassan schematic

This schematic shows the IPerCom

video entry system with iPassan

proximity access control

IP Network

1717/31

1717/33

1717/41

1717/43

Core cable

Cat5e

Exit switch

Break glass

Maglock

1060/13

1060/18

1060/19

Cat5e

Maglock Maglock

Exit switch

Break glassBreak glass

Exit switch

iPassan

controller

(including

power

supply)

iPassan

controller

(including

power

supply)

iPassan

controller

(including

power

supply)

Cat5e

Core cable

iPassan

reader

iPassan

reader

iPassan

reader

1060/74

Cat5e

The installation should be installed, tested and documented as per the following standards –

European Committee for Electrotechnical Standardisation (CENELEC)

EN 50173 Information Technology –Generic Cabling Systems

EN 50173-1:2011 General requirements

EN 50173-2:2007 + A1:2010 Office Premises

EN 50173-3:2007 + A1:2010 Industrial Premises

EN 50173-4:2007 + A1:2010Residential Premises

EN 50173-5:2007 + A1:2010 Data Centers

EN50173-6: Distributed Building Services

CENELEC also produce the EN50174 series of standards that are concerned with the way in which cabling

systems are designed and installed –

EN 50174-1:2009 + A2:2004 Specification and Quality Assurance

EN 50174-2:2009 + A2:2004 Installation planning & practices inside buildings

EN 50174-3:2013 Installation planning & practices outside buildings

Another relevant CENELEC standard is –

EN 50310:2010 Application of equipotential bonding and earthing in

buildings with information technology equipment

British Standards Institute (BSI)

BSI adopts all CENELEC standards and prefix them with their authority code, i.e. EN 50174-1:2009 +

A2:2004 becomes BS EN 50174-1:2009 + A2:2004

BSI also produces its own national standards –

BS 6701:2010 Telecommunications equipment and telecomminications cabling.

Specification for installation, operation and maintenance.

BS 7671 Requirements for Electrical Installations. IET Wiring

Regulations (18th Edition).

BS6701:2010 states: All telecomminications cabling and telecomminications equipment shall meet the

requirements of the BS EN 50174 series of standards. This relates to both owners of premises (Clause 4)

and installers of telecomminications cabling and telecomminications equipment (Clause 5). Note that the

use of the word ‘shall’ is presctiptive and as such, a legal requirement.

Urmet recommends adherence to the BS EN 50173 and BS 50174 series of standards, together with the

relevent parts of BS 6701 and BS7671 to ensure a fully complient installation that conforms to UK legal

requirements. It is the responsibility of the installer to ensure that their practices are in accordance with

the latest published editions of the relevant standards.

Network installation and configuration requirements

Specific network requirements for IPerCom are as follows –

IGMPv2

IGMPv3 Multicast Service

must be

enabled.

The following ports must be open and not restricted –

TCP ports 2049, 51234, 5060, 50118, 3306, 13451 to 3460, 111, 80, 433, 41365, 22,

918 & 40279.

UDP ports 32768, 2049, 514, 32771, 34956, 917, 34839, 67, 5060, 69, 975, 111, 123.

Multicast must be enabled on 238.0.0.200:55000 and on 239.255.0.200 (all ports).

TCP/UDP ports used for Internet access (if any) TCP:5060,6060 UDP:5060,6060.

Bandwidth per end point (Kbps) 2500 for upload and 10000 for download.

1717/31 or 1717/33 Max Pro Touchscreen Monitor connections

1717/31 or 1717/33 Max Pro Touchscreen Monitor

10 9

17” Touchscreen 6Micro SD card slot

22MP webcam 7Switch NOT USED

3Microphone 812-Way connector for external connections

4Blue backlit Home button 9Secondary LAN connection for Home Area Network

5Speakers 10 LAN connection to IPerCom network

1717/

The

the IPerCom ‘door entry network’ and one for connection to the

Network).

1717/

1 or 1717/

The

1717/31 or 1717/33 Max Pro Touchscreen Monitor

the IPerCom ‘door entry network’ and one for connection to the

Network).

Door entry system

1 or 1717/

1717/31 or 1717/33 Max Pro Touchscreen Monitor

the IPerCom ‘door entry network’ and one for connection to the

Network).

Door entry system

1 or 1717/

3 Max

1717/31 or 1717/33 Max Pro Touchscreen Monitor

the IPerCom ‘door entry network’ and one for connection to the

Maximum PoE power

requirement for Max

Touchscreen is

Door entry system

network

3 Max

Pro

Touchscreen Monitor connections

1717/31 or 1717/33 Max Pro Touchscreen Monitor

the IPerCom ‘door entry network’ and one for connection to the

Maximum PoE power

requirement for Max

Touchscreen is

12W

network

Touchscreen Monitor connections

1717/31 or 1717/33 Max Pro Touchscreen Monitor

the IPerCom ‘door entry network’ and one for connection to the

Maximum PoE power

requirement for Max

12W

Touchscreen Monitor connections

1717/31 or 1717/33 Max Pro Touchscreen Monitor

the IPerCom ‘door entry network’ and one for connection to the

DOORPHONE

POE PORT

Touchscreen Monitor connections

1717/31 or 1717/33 Max Pro Touchscreen Monitor

has two LAN connectors;

the IPerCom ‘door entry network’ and one for connection to the

DOORPHONE

POE PORT

LAN PORT

Touchscreen Monitor connections

has two LAN connectors;

the IPerCom ‘door entry network’ and one for connection to the

local apartment network (Home Area

DOORPHONE

LOCAL

LAN PORT

has two LAN connectors;

local apartment network (Home Area

LOCAL

Note that the subnet of the

DOORPHONE PORT and the

LOCAL LAN PORT must be

different

has two LAN connectors;

one for connection to

local apartment network (Home Area

Note that the subnet of the

DOORPHONE PORT and the

LOCAL LAN PORT must be

different

Apartment

one for connection to

local apartment network (Home Area

Note that the subnet of the

DOORPHONE PORT and the

LOCAL LAN PORT must be

Apartment

network

one for connection to

local apartment network (Home Area

Note that the subnet of the

DOORPHONE PORT and the

LOCAL LAN PORT must be

network

one for connection to

local apartment network (Home Area

Autres manuels pour IPerCom

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels urmet domus Système d'interphone

urmet domus

urmet domus miro 1160/3 Mode d’emploi

urmet domus

urmet domus iPercom VOG 5+ 1761 Manuel d'installation et d'exploitation

urmet domus

urmet domus VOG7 1760/31A Manuel d'installation et d'exploitation

urmet domus

urmet domus 1730 Manuel utilisateur

urmet domus

urmet domus VOG 7 1760 Manuel du système

urmet domus

urmet domus AIKO 1716/1 Manuel utilisateur

urmet domus

urmet domus mini note 1722/85 Manuel du système

urmet domus

urmet domus 1043/550 Manuel utilisateur

urmet domus

urmet domus signo 1140 Manuel utilisateur

urmet domus

urmet domus sinthesi 2VOICE 1083/14 Manuel utilisateur

urmet domus

urmet domus 1761/33 Manuel utilisateur

urmet domus

urmet domus 1722 Guide de l'utilisateur

urmet domus

urmet domus IPerVoice 1039 Manuel utilisateur

urmet domus

urmet domus DUO 752 Manuel utilisateur

urmet domus

urmet domus MATIBUS 1752/20D Manuel utilisateur

urmet domus

urmet domus Alpha 1168 Manuel d'installation et d'exploitation

urmet domus

urmet domus 1043/550A Manuel utilisateur

urmet domus

urmet domus 826 DIGITAL CALL SYSTEM Manuel utilisateur

urmet domus

urmet domus iPer Voice Max 1717 Series Manuel utilisateur

urmet domus

urmet domus IPERCOM 1761 Manuel utilisateur

urmet domus

urmet domus Agora Instructions de montage

urmet domus

urmet domus Alpha 1168 Manuel utilisateur

urmet domus

urmet domus VOG7 1760 Manuel d'installation et d'exploitation

urmet domus

urmet domus 2VOICE ELEKTA Guide rapide

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur

urmet domus IPerCom Manuel

Manuels Système d'interphone populaires d'autres marques