Urban Electric ABBOTT Guide de démarrage rapide

SG-1245

ABBOTT

ASSEMBLY AND MOUNTING INSTRUCTIONS

GENERAL NOTES

COMPONENTS PROVIDED FOR INSTALLATION

• THIS LUMINAIRE IS SUITED FOR DAMP LOCATIONS.

• THIS LUMINAIRE IS UL LISTED. WHEN INSTALLING LUMINAIRE, CONFORM

TO ALL APPLICABLE LOCAL ELECTRICAL CODES, ORDINANCES, AND THE

NATIONAL ELECTRICAL CODE (NEC).

• FOR YOUR SAFETY AND PROPER OPERATION OF LUMINAIRE, READ AND

UNDERSTAND ALL INSTRUCTIONS COMPLETELY BEFORE COMMENCING

INSTALLATION OF THIS LUMINAIRE.

• CAREFULLY UNPACK THE LUMINAIRE AND INSPECT FOR DAMAGE.

• THIS PRODUCT IS RATED ONE 60W MAX, TYPE B BULB(S).

• SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CAUTION

THIS PRODUCT SHOULD BE INSTALLED ONLY BY A LICENSED ELECTRICIAN.

WARNING

THE ELECTRICITY MUST BE TURNED OFF AT THE MAIN FUSE BOX BEFORE

INSTALLING THIS LUMINAIRE. TURNING THE POWER OFF USING THE LIGHT

SWITCH MAY NOT BE SUFFICIENT TO PREVENT ELECTRICAL SHOCK.

WOOD SCREWS SET SCREWS WIRE NUTS EXPANSION ANCHORS

TORPEDO BULB(S) MOUNTING PLATE ALLEN WRENCH

TORPEDO TIP

ABBOTT

ASSEMBLY AND MOUNTING INSTRUCTIONS SG-1245

MOUNTING INSTRUCTIONS

MOUNTING DIAGRAM ELECTRICAL CONFIGURATION TABLE

FROM HOME FROM LUMINAIRE

CONNECT BLACK OR RED (HOT)

HOUSE SUPPLY CIRCUIT WIRE TO:

LUMINAIRE ROUND WIRE (HOT)

CONNECT WHITE (NEUTRAL)

HOUSE SUPPLY CIRCUIT WIRE TO:

LUMINAIRE RIBBED WIRE

(NEUTRAL)

CONNECT GREEN INSULATED OR BARE COPPER (GROUND -) HOUSE

SUPPLY CIRCUIT WIRE AND LUMINAIRE BARE STRANDED WIRE

(GROUND -) TO GREEN GROUND SCREW ON CROSSBAR.

GENERAL NOTE: USE UL LISTED WIRE NUTS FOR THE

WIRING CONNECTIONS IN THIS LUMINAIRE. WRAP WIRE NUT

CONNECTIONS WITH UL LISTED ELECTRICAL TAPE.

FOR QUESTIONS, PLEASE CONTACT CLIENT SERVICES AT:

843.723.8140 OR [email protected]

STEP 1

SHUT OFF THE MAIN ELECTRICAL SUPPLY TO THE JUNCTION

BOX FROM THE FUSE BOX/CIRCUIT BREAKER. TURNING

POWER

OFF AT THE SWITCH IS NOT SUFFICIENT.

STEP 2

REMOVE MOUNTING PLATE FROM THE BACK OF THE FIXTURE

USING THE ALLEN WRENCH PROVIDED AND SET FIXTURE AND

SET SCREWS ASIDE.

STEP 3

LOCATE JUNCTION BOX AND PULL HOUSE SUPPLY CIRCUIT

WIRING THROUGH THE WIRE-WAY HOLE OF THE MOUNTING

PLATE. ATTACH THE MOUNTING PLATE DIRECTLY TO THE

JUNCTION BOX AND/OR DIRECTLY TO THE WALL SURFACE

USING THE MOUNTING SCREWS AND EXPANSION ANCHORS

PROVIDED. IT IS IMPORTANT TO CHECK LEVEL ON THE

MOUNTED WALL PLATE.

STEP 4

USING THE WIRE NUTS PROVIDED, MAKE ELECTRICAL

CONNECTIONS BY FOLLOWING THE ELECTRICAL CONFIGURATION

TABLE BELOW. ENSURE THAT ALL ELECTRICAL CONNECTIONS

ARE WRAPPED WITH UL-LISTED ELECTRICAL TAPE.

STEP 5

ATTACH THE FIXTURE TO THE MOUNTING PLATE BY SLIDING

THE FIXTURE OVER THE TOP OF THE MOUNTING PLATE AND

THEN SECURE THE FIXTURE AT THE BOTTOM WITH THE SET

SCREWS PROVIDED. BE CAREFUL TO AVOID SCRATCHING THE

FINISH ON THE FIXTURE.

STEP 6

INSTALL LIGHT BULB/S IN FIXTURE SOCKET AND RESTORE

POWER TO THE CIRCUIT.

STEP 7

CONFIRM PROPER OPERATION OF THE LIGHT FIXTURE

Autres manuels Urban Electric Éclairage extérieur

Urban Electric

Urban Electric CAY Guide de démarrage rapide

Urban Electric

Urban Electric ADGER’S WHARF Guide de démarrage rapide

Urban Electric

Urban Electric BELMONT WALL MM-3900 Guide de démarrage rapide

Urban Electric

Urban Electric CHARLESTON Guide de démarrage rapide

Urban Electric

Urban Electric GAS VIC Guide de démarrage rapide

Urban Electric

Urban Electric ARCHIBALD Guide de démarrage rapide

Urban Electric

Urban Electric ALLEN Guide de démarrage rapide

Urban Electric

Urban Electric CLIPPER Guide de démarrage rapide

Urban Electric

Urban Electric DUNHILL Guide de démarrage rapide

Urban Electric

Urban Electric MARKHAM Guide de démarrage rapide

Urban Electric

Urban Electric PAM POCKET Guide de démarrage rapide

Urban Electric

Urban Electric BELMONT WALL Guide de démarrage rapide

Urban Electric

Urban Electric HARROGATE Guide de démarrage rapide

Urban Electric

Urban Electric ALTAMONT WET Guide de démarrage rapide

Urban Electric

Urban Electric BALFOUR Guide de démarrage rapide

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur