Uplus Lighting IP-L360 Manuel utilisateur

User manual

IP-L360

Please read the instructions carefully before use

TABLE OF CONTENTS

1. Safety Instructions………………………………………………………………………………3

Technical Specifications…………………………………………………………………………4-5

Installation…………………………………………………………………………………………5-7

Control Menu ………………………………………………………………………………………7

DMX Channels ……………………………………………………………………………………8-9

Dimension…………………………………………………………………………………………10

Trouble Shooting…………………………………………………………………………………11

Fixture Cleaning………………………………………………………… ………………………11

STATEMENT

The product has well capability and intact packing when leave factory. All of the user should

comply with warning item and manual, any misuse cause of the damages are not included in our

guarantee, and also can not be responsible for any malfunction & problem owing to ignore the

manual.

1.Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction booklet.

•Unpack and check carefully there is no transportation damage before using the unit.

•Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

•It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

•The unit is for indoor use only. Use only in a dry location.

•The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces. Be sure that no ventilation slots are blocked.

•Disconnect main power before replacement or servicing.

•Make sure there are no flammable materials close to the unit while operating as it is fire hazard.

•Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always

by taking its base.

•Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher

than this Unit surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand

during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before

replacing or serving.

•the event of serious operating problem, stop using the unit immediately.Never try to repair the unit

by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center. Always use the same type spare parts.

•DO NOT touch any wire during operation as high voltage might be causing electric shock.

Warning:

•To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

•The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Caution:

•There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any

repairs yourself. In the unlikely event your unit may require service, please contact your nearest

dealer.

Installation:

•The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly

fixed to avoid vibration and slipping while operating. And make sure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also

always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.

•The equipment must be fixed by professionals. And it must be fixed at a place where is out of the

touch of people.

2.Technical Specifications

Light Source:

Power supply: 100-240V - 50/60Hz

Power consumption: 400W

LED power: 360W

LED source: Ultra-bright 90x3W 7000K, 180x0.5W RGB

Optic: High efficiency optic system

Sections: 20 individual sections control (5xRGBW)

Luminous flux: Strobe 45000lm, Static >15000lm

Field angle: 90°

Dimmer mode: 8&16 Bit

Dimmer curve: Linear, curve

DMX mode: 13/20CH

Control mode: DMX, Auto, Master-slave

Protocol: DMX, RDM

Effect: Multi-layer, dynamic patterns, color mixing

Structure

IP rating: IP65

Body: Die-cast aluminum

Free light CON: Yes

Stand CON: 2 Max.

Hang drop CON: 4 Max.

Rotation 360: Yes

Working Condition: -30°~ 70°C

Connection

Power: True1 in & out

DMX: 3pin DMX in & out

Power cable: CCC 2.5mm2, 8 power link Max

Power and DMX cable type: Customized

Box Info

- Quick lock omega brackets

- Safety cable

- Floor stand

- Power & DMX cables

Carton: 2 in 1,

fly Case: 4 in 1 or 8 in 1

Fixture: L1004 x W96 x H130（Bracket H178) mm

Carton size(2in1): 1330x290x200mm

NW: 10KG (Gross 2in1 23.5KG)

Optional Accessories

- PMMA froster

- PMMA cover

- Barndoor

- Infinite rotation engine

- Clamp

- Flight case

3. Installation

Your IP24X15 BAR can be installed in every kind of following positions.

Please see the explanations and rely to the instructions for a safe operation and secure handling.

Structural Connection

The IP24X15 BAR can be connected using the included quick-release pins. Place the devices next

to each other.

(Insert both Pins to connect the devices)

For the first uses this may be a little hard. Move the devices a little until the Bolts can be inserted

completely. For vertical installation do not exceed the amount of 4 pieces. (caution, provisional

specification) In case of hanging installation, each device needs to be saved individually! Using the

quick-release pins for horizontal installation is not recommended. Each device should individually

be installed with the given installation options below.

Horizontal Installation on the floor

You could place the IP24X15 BAR on the floor by 2 stands. Please make sure the surface is plane

and the reliability of the floor is sufficient.

Horizontal hanging with tilt bracket

You can attach the IP24X15 BAR to a Truss or Pipe. Notice that the

tilt bracket(106mm) should face down from the hanging structure. Use the centered holes in the Tilt

Bracket. You can use the additional fix Omega Brackets to hang the device horizontal.

Hanging Vertically “dropped”

Use the vertical Adapter set (including Omega Bracket, optional accessory) to “drop” the IP24X15

BAR from a rigging structure.Notice that we will release a

detailed rigging manual for the different options shortly.

Vertical Installation on the floor

Use the vertical Adapter (optional accessory) in combination with a base plate (optional accessory)

. Use the Small standing plate (optional accessory) if

you only wish to install one IP24X15 BAR. If you want to install more than one

device, screw the Small standing plate to a normal truss base plate. We have two kinds of standing

plate, fixed and infinite rotating, for your options.

Notice that we will release a detailed rigging manual for the different options

shortly.

Safety attachment

In any case of rigging the device attach the Safety rope to any of the dedicated eyelets integrated i

nto the sliding brackets.

(Length of Omega & Safety cable position)

4.Control Menu

Display:

MENU To select the programming functions

DOWN To go backward in the selected functions

UP To go forward in the selected functions

ENTER To confirm the selected functions (unlock screen)

Operations:

Press "MENU" to unlock screen, then press “Menu” to select 7 different functions, Press the "UP or

DOWN"keys to increase or decrease the value,Press "ENTER" to save and Exit.

No.

Display

Description

DMX_CH11

Addr=001

Address

001-512

DMX

1-512

Current ctrl mode

Current DMX address

Ctrl Mode

DMX_CH

13/20

2CH Mode 13/20

Auto1

000-255

Built-in effect Auto1

Auto2

000-255

Built-in effect Auto2

Auto3

000-255

Built-in effect Auto3

Adjust

Red

000-255

Red Manual Dimmer

Green

000-255

Green Manual Dimmer

Blue

000-255

Blue Manual Dimmer

White

000-255

White Manual Dimmer

CURVE

000-255

Dimmer speed,

Display board menu has 1-5 kinds of dimming speed can be

selected

TEMP

000-255

Current temp

5.DMX Channels

12 Channel Mode

Channel

Function

DMX Value

Description

CH1

RGB Dimmer

OFF

1-255

Dimmer

CH2

Red

OFF

1-255

Dimmer

CH3

Green

OFF

1-255

Dimmer

CH4

Blue

OFF

1-255

Dimmer

CH5

White

OFF

1-255

Dimmer

CH6

Strobe Mode

0-5

No Function

6-42

Strobe mode 1

43-85

Strobe mode 2

86-128

Strobe mode 3

129-171

Strobe mode 4

172-214

Strobe mode 5

215-255

Strobe mode 6

CH7

Master Strobe Macro

0-15

16-57

Macro 1

58-99

Macro 2

100-141

Macro 3

142-183

Macro 4

184-225

Macro 5

226-255

Macro 6

CH8

Effects strobe

0-9

No Function

10-255

Strobe from slow to fast

CH9

Effect Macro

0-4

5-9

Macro 1

10-14

Macro 2

15-19

Macro 3

……

250-254

Macro 50

255

Macro 51

CH10

Effect Color Macro Speed

0-255

Speed from slow to fast

CH11

RGB Dimmer speed

0-255

Backlight Dimming speed from fast to slow

CH12

Effect Color Macro

0-255

Effect Color Macro

20 Channel Mode

Channel

Function

DMX Value

Description

CH1

Red 1

OFF

1-255

Dimmer

CH2

Green 1

OFF

1-255

Dimmer

CH3

Blue 1

OFF

1-255

Dimmer

CH4

White 1

OFF

1-255

Dimmer

CH5

Red 2

OFF

1-255

Dimmer

CH6

Green 2

OFF

1-255

Dimmer

CH7

Blue 2

OFF

1-255

Dimmer

CH8

White 2

OFF

1-255

Dimmer

CH9

Red 3

OFF

1-255

Dimmer

CH10

Green 3

OFF

1-255

Dimmer

CH11

Blue 3

OFF

1-255

Dimmer

CH12

White 3

OFF

1-255

Dimmer

CH13

Red 4

OFF

1-255

Dimmer

CH14

Green 4

OFF

1-255

Dimmer

CH15

Blue 4

OFF

1-255

Dimmer

CH16

White 4

OFF

1-255

Dimmer

CH17

Red 5

OFF

1-255

Dimmer

CH18

Green 5

OFF

1-255

Dimmer

CH19

Blue 5

OFF

1-255

Dimmer

CH20

White 5

OFF

1-255

Dimmer

6.Dimension

Table des matières

Autres manuels Uplus Lighting Équipement d'éclairage

Uplus Lighting

Uplus Lighting MINI740 Manuel utilisateur

Uplus Lighting

Uplus Lighting 200 LED BSW Manuel utilisateur

Uplus Lighting

Uplus Lighting 20 MINI SPOT Manuel utilisateur

Uplus Lighting

Uplus Lighting MH12X40 PIXEL BAR Manuel utilisateur

Uplus Lighting

Uplus Lighting 3010 IP PAR Manuel utilisateur

Uplus Lighting

Uplus Lighting 300 MZ-SPOT PR Manuel utilisateur

Uplus Lighting

Uplus Lighting 400 IP BLINDER Manuel utilisateur

Uplus Lighting

Uplus Lighting 6 EYE RETRO BAR Manuel utilisateur

Uplus Lighting

Uplus Lighting PIXEL IP20X15 BAR Manuel utilisateur

Uplus Lighting

Uplus Lighting DUAD540 STROBE Manuel utilisateur

Uplus Lighting

Uplus Lighting 230 BEAM Manuel utilisateur

Uplus Lighting

Uplus Lighting LED PROFILE FIX Manuel utilisateur

Uplus Lighting

Uplus Lighting MIX560 Manuel utilisateur

Uplus Lighting

Uplus Lighting 750 BSWF Manuel utilisateur

Uplus Lighting

Uplus Lighting IP1000 Strobe Manuel utilisateur

Uplus Lighting

Uplus Lighting IP MATRIX 5 Manuel utilisateur

Uplus Lighting

Uplus Lighting LED PROFILE MZ Manuel utilisateur

Uplus Lighting

Uplus Lighting W3725 Manuel utilisateur

Uplus Lighting

Uplus Lighting IR 1210 PAR Manuel utilisateur

Uplus Lighting

Uplus Lighting W1925 Manuel utilisateur

Uplus Lighting

Uplus Lighting 19X15Z WASH Manuel utilisateur

Uplus Lighting

Uplus Lighting IP 300Z SPOT-WW Manuel utilisateur

Uplus Lighting

Uplus Lighting RETRO 360 Manuel utilisateur

Uplus Lighting

Uplus Lighting IP-Z740 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur