Unitron UMic Manuel utilisateur

Unitron

uMic™

guide

Thank you

Thank you for choosing the Unitron uMic™.

At Unitron, we care deeply about people with

hearing loss. We work closely with hearing

healthcare professionals to make advanced,

purpose-driven solutions available to everyone.

Because hearing matters.

Your uMic

Hearing healthcare professional: ________________

____________________________________________

Telephone: __________________________________

Serial number of uMic: _________________________

Warranty: ___________________________________

Date of purchase: _____________________________

Table of contentsQuick reference

Your uMic at a glance ......................................................................2

Getting started ................................................................................4

Charging the uMic ............................................................................5

Turning the uMic on and off .............................................................7

Pairing the uMic with uDirect 2 ........................................................8

Preparing the uDirect 2 .................................................................12

Connecting the uMic and uDirect 2 ................................................13

Functional test of uMic ................................................................... 14

Setting the uMic volume ................................................................15

Wearing the uMic correctly ............................................................ 16

uMic pause and resume .................................................................17

Switching the uMic off.................................................................... 18

Special use cases ...........................................................................19

Troubleshooting guide ...................................................................24

Warnings ........................................................................................29

Compliance information .................................................................33

Information and explanation of symbols .......................................35

on off

Charging uMic

Bluetooth pairing

On/Off

power

audio

Wearing uMic

Indicator

Switching ON Green 2 seconds

Switching OFF Red 2 seconds

Charging Solid red

Low battery

warning

Additional red short blink

as well as the main light

Streaming Solid blue

Streaming paused Short blink blue

Pairing mode Rapid blink blue

up to 20 m

(60 ft)

Other optional accessories

Unitron mini-USB power supply

12V car charger adapter

In addition to your Unitron wireless hearing

aids, a compatible streamer solution is required.

Within this user guide the uDirect™ 2 is shown

as an example. As the uMic transmitter is based

on Bluetooth® technology, other Bluetooth

receivers may be compatible. However, the

uMic is optimized and tested only for Unitron

uDirect 2.

Your uMic at a glance

1 Volume up ( )

2 Volume down ( )

3 Power switch ( )

4 Charging input (mini-USB)

5 Microphone opening

6 Status indicator light

7 Eyelet for lanyard

8 Retaining clip

Accessories

(Contents may vary depending on country)

Dual mini-USB splitter (1 in / 2 out)

Lanyard

Protective pouch

5 6 7

® Bluetooth is a registered trademark of Bluetooth SIG Inc.

Charging the uMic

Your uMic has a built-in, non-removable

rechargeable battery. When the battery is low,

the indicator light will blink red.

To charge:

1. Insert the Unitron

power supply

provided with the

uDirect 2 into the

uMic mini-USB

socket.

2. Plug the power supply into a power outlet.

Typical charging time is 2 hours. Charging is

complete when the indicator light turns solid

green.

When charging your uMic for the ﬁrst time, let it

charge for at least three hours, even if the battery

indicator is not lit or turns green earlier.

Getting started

The system consists of three main elements:

• uMic

• Unitron hearing aids

• Unitron uDirect 2

The uMic transmits the speaker’s voice

wirelessly to your hearing aids via the uDirect 2

streamer.

The hearing aid microphone level will

automatically be adjusted while the uMic signal

is received. The level of adjustment is set by

your hearing healthcare professional.

power

audio

hearing aid speaker

uMic

up to 20 meters

(60 )

uDirect 2

Using one power supply for 2 devices:

Insert the dual mini-USB splitter between the

power supply and the devices as shown below.

With uDirect 2:

Both devices can be

charged at the same time.

With uTV 2:

The uMic can be charged

while uTV™ 2 is being

used.

It is safe to leave the uMic connected to the

charger overnight.

Turning the uMic on and off

Slide the power switch ( ) as shown to turn

the uMic on or off.

Slide the power switch in

direction of the charging

input to turn the uMic on.

Sleep mode

If after 30 minutes no streamer device, such as

uDirect 2, is found the uMic will power down to

save battery even if the power switch is in the on

position.

To recover from sleep mode, switch the uMic off

and turn it on again.

on off

Put uMic into pairing mode:

If the uMic has never been paired before,

pairing mode will be automatically activated

after turning it on.

To manually start pairing mode:

1. Switch the uMic off.

2. Press and hold the volume up

button ( ).

3. Turn the uMic on while still

pushing the ( ) button.

4. Release the ( ) button after

2 seconds when the indicator light rapidly

blinks blue.

5. Make sure the uDirect 2 and uMic are within

1 m (3 ft) range of each other.

The uMic will remain in pairing mode for two

minutes or until the pairing is completed.

Pairing the uMic with uDirect 2

Before using the uMic with a streamer for the

ﬁrst time, the devices must be paired with each

other.

If you are not using uDirect 2 but another

streamer, please follow the Bluetooth pairing

procedure of that device.

Put uDirect 2 into pairing mode:

1. Switch on the uDirect 2 ().

2. Press and hold the connect ( ) and volume

( ) buttons simultaneously for 2 seconds

until the audio indicator starts to rapidly

blink blue. The uDirect 2 will remain in pairing

mode for two minutes or until the pairing is

complete.

2 sec

1110

Information about power and battery:

Switching ON Green 2 seconds

Switching OFF Red 2 seconds

Charging Solid red

Charged and full battery Solid green

Low battery warning Additional red short

blink as well as the

main light

uMic sleep mode or off Indicator is unlit

Switch the uMic off and on again to turn the

device on from sleep mode.

If the red “low battery” blinks:

Battery level is <20%

Less than 1.5 hours are left for streaming

Consider charging the uMic

The uMic can also be charged during operation.

Completion of pairing:

Wait until both indicator lights turn solid blue.

This can take up to 2 minutes but typically is done

within a few seconds.

The uMic can be paired to a maximum of 4 devices.

A ﬁfth pairing will replace the ﬁrst paired device.

Two devices need to be paired only once.

They remain paired after switching off and will

automatically connect after being turned on again.

Understanding the status light

Information during operation:

uMic

uDirect 2

Switching ON Green 2 seconds

Streaming Solid blue Solid blue

Streaming

paused

Short blue blink Short blue blink

Pairing mode

Rapid blue blink Rapid blue blink

poweraudio

1312

Connecting the uMic and uDirect 2

Every time the devices are turned on, they will

connect with each other automatically.

1. Make sure the uDirect 2 and uMic are within

2 meters (6ft) range of each other.

2. Turn the uMic on.

3. The indicator light will turn green

ﬁrst.

4. Wait until the indicator lights of

both devices turn solid blue. This

may take up to 30 seconds but

usually occurs within 5 seconds.

The uDirect 2 will conﬁrm the connection via

spoken notiﬁcations or beeps in your hearing

aids, depending on the uDirect 2 conﬁguration.

If the status light is rapidly blinking blue after

turning on the uMic or if the status light does

not turn solid blue within two minutes, repeat

the pairing.

Preparing the uDirect 2

1. Turn the uDirect 2 on.

2. Always wear the uDirect 2 around the neck.

3. Make sure both plugs are well connected in

the neckloop sockets.

For a more detailed explanation of the uDirect 2,

please refer to the uDirect 2 user guide.

green

blue

1514

Setting the uMic volume

To change the uMic volume:

1. Speak into the uMic from a 20 cm (8”)

distance.

2. Use the volume ( ) buttons

to set the uMic volume to a

comfortable volume level.

If your hearing aids pick up too much ambient

noise, use the following 2 steps to give the uMic

more focus:

1. Reduce the hearing aid volume by

pressing the uDirect 2 ( ) button.

2. Then increase the uMic volume by

pressing the uMic ( ) button.

The uMic volume setting will be

stored even when switching off the uMic.

Your hearing healthcare professional can

change the level of the hearing aid microphones

while using the uMic to adjust the volume of

sounds around you.

Functional test of uMic

Before using the system, perform

a quick functional test by gently

tapping on the microphone

opening.

You should clearly hear the tapping noise in

your hearing aids.

Line of sight between the uMic and the streamer

is usually not required. If the audio transmission

ends abruptly, refer to the troubleshooting

guide.

Autres manuels pour uMic

Table des matières

Autres manuels Unitron Prothèse auditive

Unitron

Unitron N Moxi Dura Pro Manuel utilisateur

Unitron

Unitron uDirect 3 Manuel utilisateur

Unitron

Unitron Shine Rev Manuel utilisateur

Unitron

Unitron Shine Moda II Manuel utilisateur

Unitron

Unitron Stride P Pro Manuel utilisateur

Unitron

Unitron Moxi B-R Series Manuel utilisateur

Unitron

Unitron uDirect 2 Manuel utilisateur

Unitron

Unitron uTV 2 Manuel utilisateur

Unitron

Unitron T Moxi All 800 Manuel utilisateur

Unitron

Unitron BTE Next Manuel utilisateur

Unitron

Unitron T Insera Pro Manuel utilisateur

Unitron

Unitron Quantum Slim Tube HE Manuel utilisateur

Unitron

Unitron Quantum Pro ITE Manuel utilisateur

Unitron

Unitron Latitude Moxi 13 Instructions de montage

Unitron

Unitron iCube II Manuel

Unitron

Unitron Passport Fuse Manuel utilisateur

Unitron

Unitron uTV Manuel utilisateur

Unitron

Unitron Quantum2 HP Manuel utilisateur

Unitron

Unitron uDirect Manuel utilisateur

Unitron

Unitron Breeze Manuel utilisateur

Unitron

Unitron uMic Manuel utilisateur

Unitron

Unitron uDirect 3 Manuel utilisateur

Unitron

Unitron T Max series Manuel utilisateur

Unitron

Unitron Quantum micro CIC Instructions de montage

Manuels Prothèse auditive populaires d'autres marques

Sonic

Sonic Bliss miniBTE Manuel utilisateur

Lexie

Lexie B1 Manuel de la liste des pièces

Widex

Widex FM+DEX Manuel utilisateur

Siemens

Siemens Triano Manuel utilisateur

Camplicomms

Camplicomms HC-200 Manuel utilisateur

Widex

Widex SUPER 220 S2-VSD Manuel utilisateur

Phonak

Phonak Q90 Manuel utilisateur

Williams Sound

Williams Sound SoundPlus WIR 237 Mode d’emploi

Oticon Medical

Oticon Medical Ponto SoundConnector Manuel utilisateur

Siemens

Siemens Life micon Manuel utilisateur

Starkey

Starkey Destiny Manuel utilisateur

Audicus

Audicus The Icon Manuel utilisateur

Advanced Bionics

Advanced Bionics Slim HP Standard Manuel utilisateur

Widex

Widex DREAM440 THE DREAM SERIES Manuel utilisateur

Phonak

Phonak myPilot Manuel utilisateur

NIKEN

NIKEN NK-401 Manuel utilisateur

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur

Sonetik

Sonetik GOHEAR Manuel utilisateur