Unitron uDirect 2 Manuel utilisateur
Unitron
uDirect™ 2
guide
Thank you
Thank you for choosing the Unitron uDirect™ 2.
At Unitron, we care deeply about people with
hearing loss. We work closely with hearing
healthcare professionals to make advanced,
purpose-driven solutions available to everyone.
Because hearing matters.
Your uDirect 2
Hearing healthcare professional: ________________
____________________________________________
Telephone: __________________________________
Serial number of uDirect 2: _____________________
Warranty: ___________________________________
Date of purchase: _____________________________
Table of contentsQuick reference
Your uDirect 2 at a glance ................................................................2
Setting up the power supply ...........................................................4
Charging the uDirect 2 .....................................................................5
Turning the uDirect 2 ON and OFF ....................................................6
Battery status information ...............................................................7
uDirect 2 Bluetooth pairing ............................................................8
Wearing the uDirect 2 correctly ......................................................9
Testing sound via the uDirect 2 ......................................................10
Streaming music via a cable ..........................................................11
Streaming music via Bluetooth .................................................... 12
Watching TV .................................................................................. 14
Adjusting the volume ....................................................................15
Using uDirect 2 for phone calls ...................................................... 16
Advanced phone options ...............................................................23
Using uDirect 2 as a remote control ...............................................27
Using uDirect 2 with FM ................................................................. 31
Wearing the uDirect 2 in different ways .........................................34
Managing multiple audio inputs to the uDirect 2 ..........................35
Resetting your uDirect 2................................................................ 40
Summary of indicator lights ...........................................................41
Introduction to Bluetooth ..............................................................44
Setting up Bluetooth .....................................................................48
Caller identification: spoken caller names .....................................55
Troubleshooting guide ...................................................................58
Warnings ........................................................................................66
Compliance information .................................................................72
OFF ON
Charging uDirect 2
Power indicator
Solid red - charging
Solid green - fully charged
Red blink - low battery
No light - battery drained
Bluetooth pairing
Wearing uDirect 2
On/Off
2 sec Blue blink
32
Accessories
o, p Universal power supply with mini-USB plug
q, r, s, t US, EU, UK, AUS adapter
Other optional accessories
External lapel microphone “MC1”
Short neckloop (51 cm)
Unitron uTV 2 (Bluetooth transmitter for TV use)
Audio cable, 1.5 m / 5 ft.
USB cable, 3 m / 10 ft.
Included country adaptors may vary by country.
Your uDirect 2 at a glance
Buttons
a Access ( )
b Volume or SmartFocus* ( )
c Home ( )
d Connect ( )
e ON/OFF switch ( )
Inputs
f Microphone openings
g Audio input (3.5 mm jack)
h FM input (Europlug)
i Charging input (mini-USB)
Indicators
j Audio indicator
k Power indicator (power)
Neckloop
l Neckloop sockets
m Neckloop (with antenna)
n Neckloop plugs
*Can be configured by your hearing healthcare professional.
f
a
b
c
e
j
k
l
n
d
m
g h i
o
p q r
ts
54
Charging the uDirect 2
Your uDirect 2 has a non-removable rechargeable
battery.
To charge it:
1. Plug the mini-USB plug into the
mini-USB port on the uDirect 2.
2. Plug the power supply into a
power outlet.
Power indicator
Solid red: Charging,
typically 90 minutes.
Solid green: Battery fully charged.
It is safe to leave the uDirect 2
connected to the charger overnight.
When charging your uDirect 2 for the first time,
let it charge for at least three hours, even if the
battery indicator is not lit or turns green earlier.
A new battery’s full performance is achieved only
after two to three complete charge and discharge
cycles.
Setting up the power supply
1. Select the adapter that corresponds to your
country.
US EU UK AUS
2. Insert the round corner of
the adapter to the round
corner of the universal
power supply until it is
completely inserted.
3. Click the tail of the adapter
in to lock it into place. Make sure the adapter
is securely locked.
To remove the power adapter:
a. Pull back the tab on the
universal power supply and
hold.
b. Gently pull the adapter upwards
to remove it from receptacle.
c. Then start over with step 1 (above).
2.
a. b.
3.
76
Turning the uDirect 2 ON and OFF
Slide the power switch
() as shown to turn
the uDirect 2 ON or OFF.
Switch the uDirect 2
OFF when not in use or if in storage or during
transportation.
For operational use switch the uDirect 2 ON.
Battery status information
The power indicator shows the following:
Green for 2 seconds Switching ON
Blink red then solid
for 2 seconds
Switching OFF
Slow blink green Normal operation
Short blink red <20% battery left,
please charge
No blinking just
after switching ON
Charge for at
least 2 hours
If the neckloop has been unplugged for more
than 2 minutes, the power indicator is only lit as
long as a button is pressed.
OFF ON
98
Wearing the uDirect 2 correctly
Before any phone, music or TV streaming can
take place, the uDirect 2 must be switched ON
and worn correctly as shown below:
1. Put the neckloop around
your neck (easily done by
unplugging one neckloop
plug).
2. Make sure both plugs
are well connected in the
neckloop sockets.
3. Switch the uDirect 2 ON.
For streaming, the neckloop must always be
plugged in. When unplugged, the uDirect 2
will go into sleep mode after two minutes. The
power and audio indicators will stop blinking
and all active Bluetooth connections are
terminated to save power. Plug the neckloop in
again to activate the streaming.
uDirect 2 Bluetooth pairing
1. Switch ON ( ) the uDirect 2.
2. Press and hold the connect ( ) and volume
() buttons simultaneously for 2 seconds until
the audio indicator starts to rapidly blink blue.
3. Start the pairing process on the Bluetooth®
device (e.g., phone) within 1 minute according
to the devices user guide and use code
“0000” when prompted.
4. After successful pairing, the audio indicator
will stop rapidly blinking blue.
The pairing process does not require the neckloop
to be plugged in. For streaming and Bluetooth
connection, the neckloop is mandatory.
When pairing to a cellular phone, we recommend
disabling the phone key tones and SMS alerts.
2 sec
1110
Make sure the uDirect 2 is charged and
switched ON.
Make sure you are not on a phone call
connected through the uDirect 2.
Streaming music via a cable
The uDirect 2 must be switched ON and worn
correctly around your neck.
1. Insert the audio cable into the headphones
socket on your audio player and start the
player.
2. Insert the other end of the audio cable into
the audio input on your uDirect 2. The audio
streaming is
automatically
activated and the
audio indicator
will change to
orange.
Testing sound via the uDirect 2
1. Wear the uDirect 2 correctly and switch it ON.
2. Press and hold the connect
( ) and access ( ) buttons
simultaneously for 2 seconds until
the audio indicator turns violet.
The hearing aids will switch to the
streaming mode and you will hear the uDirect 2
sound demo for 30 seconds after the last volume
adjustment.
Use the volume ( ) buttons to adjust the
volume.
The sound demo will stop 30 seconds after the last
volume adjustment or by pressing any other key.
If you cannot hear the sound demo:
Make sure your hearing aids are inserted
correctly.
Make sure the uDirect 2 neckloop is properly
plugged in on both ends and worn around
your neck.
1312
2. Switch ON the other Bluetooth device.
3. For some Bluetooth devices it may be
necessary to press “play” on the device.
4. If the devices were paired and connected
correctly, streaming will start automatically
and the audio indicator will turn solid blue.
Use the access ( ) button to stop and restart
Bluetooth streaming.
To stop Bluetooth streaming completely, switch
the other Bluetooth device OFF or disable its
Bluetooth feature.
The uDirect 2 will confirm that Bluetooth
streaming is activated with spoken notifications
or beeps, depending on the uDirect 2
configuration.
The hearing aid programs cannot be changed
via the uDirect 2 access ( ) button when the
Bluetooth device is streaming.
Briefly press the access ( ) button to stop and
restart streaming.
The programs of your hearing aids cannot be
changed via the uDirect 2 access ( ) button
when the audio cable is plugged in.
uDirect 2 will confirm streaming via cable when
activated with either spoken notifications or
beeps, according to the uDirect 2 configuration.
Streaming music via Bluetooth
If you have an audio source equipped with
Bluetooth functionality (e.g., MP3 player), you
can stream audio wirelessly to your hearing
aids.
In order to use your uDirect 2 with a Bluetooth
enabled audio device or transmitter, you must
first pair the devices.
To start Bluetooth streaming:
1. uDirect 2 must be switched ON and worn
correctly.
1514
Adjusting the volume
Press the uDirect 2 volume ( ) buttons to adjust:
Press ( ) to increase the volume
Press ( ) to decrease the volume
Adjusting the volume on the uDirect 2 will have
the same effect as adjusting the volume of the
hearing aids.
You can also change the volume of the streaming
audio signal only by using the volume controls of
the audio device (e.g., cellular phone, MP3 player,
uTV 2). This gives you the ability to decrease the
hearing aid volume using the minus ( ) button
during a phone call in a noisy environment, and
increase the phone volume at the same time by
using the volume up button on the phone.
If your uDirect 2 was not paired with your hearing
aids by your hearing healthcare professional,
the ( ) volume buttons will only change the
streaming audio but not the hearing aid volumes.
If your uDirect 2 was configured to adjust
SmartFocus™ (comfort/clarity) instead of volume,
press ( ) for more clarity and ( ) for more
comfort.
Watching TV
We recommend using the dedicated and
optimized uTV 2 for watching TV.
It ensures low latency wireless transmission for
up to 30 meters (90 ft.), offers a built-in volume
control and acts as a charging cradle for the
uDirect 2.
Autres manuels pour uDirect 2
2
Table des matières
Autres manuels Unitron Prothèse auditive
Unitron
Unitron Breeze Manuel utilisateur
Unitron
Unitron Moxi B9-312 Manuel utilisateur
Unitron
Unitron Quantum Manuel utilisateur
Unitron
Unitron Unison Digital BTE Manuel utilisateur
Unitron
Unitron Conversa.NT Digital ITE Manuel utilisateur
Unitron
Unitron T Moxi All 800 Manuel utilisateur
Unitron
Unitron N Moxi Dura Pro Manuel utilisateur
Unitron
Unitron Indigo Manuel utilisateur
Unitron
Unitron uTV 3 Manuel utilisateur
Unitron
Unitron uMic Manuel utilisateur
Unitron
Unitron Passport Moxi Manuel utilisateur
Unitron
Unitron Latitude Moxi 13 Manuel utilisateur
Unitron
Unitron Max Manuel utilisateur
Unitron
Unitron Ziel Manuel utilisateur
Unitron
Unitron Moxi Kiss Manuel utilisateur
Unitron
Unitron Stride P Pro Manuel utilisateur
Unitron
Unitron Insera B1-312 Manuel utilisateur
Unitron
Unitron Next ITE series Manuel utilisateur
Unitron
Unitron Quantum2 HP Manuel utilisateur
Unitron
Unitron Max Manuel utilisateur
Manuels Prothèse auditive populaires d'autres marques
Advanced Bionics
Advanced Bionics Slim HP Standard Manuel utilisateur
Widex
Widex DREAM440 THE DREAM SERIES Manuel utilisateur
Phonak
Phonak myPilot Manuel utilisateur
NIKEN
NIKEN NK-401 Manuel utilisateur
ON Semiconductor
ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur
Sonetik
Sonetik GOHEAR Manuel utilisateur