Unitron ICube Manuel

iCube

Instruction

Guide

Table of Contents

Your iCube ......................................................................1

Practical Solutions to Everyday Problems ......................2

Using the iCube Guide....................................................3

Getting started................................................................4

Using iCube ...................................................................13

Indicators .....................................................................13

Important information...................................................15

Troubleshooting Guide..................................................18

Declaration of Conformity .............................................19

Notices ..........................................................................19

Your iCube

Hearing Healthcare Professional: _______________________

___________________________________________________

Telephone:__________________________________________

Model: _____________________________________________

Serial Number of iCube:_______________________________

Replacement Batteries: One AAA (1.5 Volt),

Standard or Rechargeable

Warranty:___________________________________________

Date of Purchase: ____________________________________

Le end

1 Right side fitting

indicator

2 Battery indicator

3 Bluetooth / left side

fitting indicator

4 Not supported

5 ON/OFF button

6 Bluetooth pairing

button

7 Reset button

(covered)

8 Detachable cover

9 Audio & FM

connection

(not supported,

do not use!)

10 USB charging and

programming

connection

Usin the iCube Instruction Guide

iCube enables the wireless transfer of fitting data from

your PC directly to your client’s hearing instruments.

Based on Bluetooth technology the fitting process is fast,

smooth and stable, and most importantly, cable-free.

Please read this manual carefully to benefit from all

the features of your iCube. For further information,

please visit the Unitron website:

www.unitronhearing.com

Refer to the table of contents for a complete listing of

the topics covered in this guide.

1 2 3

6 7 8 9 10

iCube accessories

• USB cable, 3 m (10 ft.)

• iCube charger

• USB Bluetooth adaptor

• USB hub

Contents may vary depending on country.

front back

Gettin started

Installin and usin the iCube char er

Install the iCube charger by plugging the power supply

into a power outlet and docking iCube into the iCube

charger as shown below. It is recommended that you

use the iCube charger to store and charge iCube

whenever it is not in use. This way it will be sufficiently

charged and ready for the next fitting session.

Char in the battery

Your iCube has an internal, rechargeable battery. As

soon as you place your iCube on the iCube charger,

the battery starts charging.

For safety reasons, rechar e the battery only with

char ers supplied by Unitron.

During the charging process, the battery indicator is lit

solid. Once the battery is fully charged, the battery

indicator will start flashing slowly. Typically, charging

an empty battery takes about 90 minutes. It is safe to

leave the charger connected overnight — the battery

cannot be overcharged.

When char in your iCube for the first time, leave it to

char e for at least three hours (even if the battery

indicator starts flashin earlier).

A new battery’s full performance is achieved only after

two or three complete char e and dischar e cycles.

Your iCube battery can be charged hundreds of times.

If the operating time of your iCube reduces

substantially, please contact your local Unitron

representative.

Operatin time

Fully charged, your iCube will operate for up to four

hours in normal use.

Battery consumption and the operating time of the

iCube greatly depend on the usage of the device.

Heavy use will reduce the operating time of your iCube

between battery recharges.

Battery status

While turned ON, your iCube indicates the battery

status on the battery indicator LED as follows:

• Yellow, slow flash – Battery level is high.

• Yellow, fast flash – Battery level is low.

Once the fast flashing starts, your iCube will still

operate for about an hour, but you should recharge

the battery as soon as possible. Low battery status is

also indicated in U:fit in the “CableFree Fitting Status”

dialog.

Connectin iCube to your computer

iCube was designed to bring you the benefits of

CableFree Fitting via Bluetooth connection. However,

there are locations where Bluetooth connections are

not allowed, so iCube can alternatively be used with a

USB connection. In either case, before you can start

using your iCube it needs to be connected with your

computer.

Before you continue, make sure the iCube battery

char e is hi h.

Connectin via Bluetooth

Connecting your iCube via Bluetooth is done in three

steps:

1. Prepare the Bluetooth connection on your

computer

To use iCube wireless via Bluetooth, make sure that

you have Bluetooth activated. If your computer is

equipped with Bluetooth built in, find the Bluetooth

setting and activate it. For specific instructions please

refer to the documentation of the computer and

operating system you are using.

If you are using NoahLink and you have already

installed the corresponding external Bluetooth

adaptor, you can use that same adaptor for iCube. If

your computer is neither equipped with Bluetooth

built in nor with a NoahLink compatible Bluetooth

adaptor, use the Bluetooth adaptor accessory

provided by Unitron.

Refer to the “quick start uide” document available

with the adaptor's Software CD and follow the

instructions. iCube works within a Bluetooth operatin

ran e of up to 10 meters (33 ft.) of the fittin

computer.

2. Start the Connection Wizard for iCube

With Bluetooth functionality turned ON, you can now

initiate the connecting process via the U:fit™ fitting

software.

If this is the first time using iCube, pressing the iCube

button on the detection screen will start the

“ConnectionWizard for iCube”.

3. Pairin iCube with your computer

Select “Use iCube via Bluetooth” and the pairing

wizard will guide you through the process of pairing

iCube with your computer. Pairing is necessary to

control which Bluetooth devices are permitted to

communicate with each other. It needs to be

completed only once, before first use.

To initiate the pairing process on iCube, set the device

into pairing mode by pressing and holding the

Bluetooth pairing button for 2 seconds until the

Bluetooth indicator is blue and flashing fast. iCube is

now in pairing mode for two minutes or until pairing is

completed.

Follow the instructions to complete pairing and finish

the connection process for iCube. Upon successful

completion, the “CableFree Fitting Status” will inform

you about the status of iCube:

Removin a Bluetooth pairin

If you wish to remove the Bluetooth pairing from your

iCube, press and hold the Bluetooth pairing button for

about 10 seconds until the Bluetooth indicator is lit

solid blue.

Connectin via USB cable

If you wish to connect your iCube via USB cable

instead of Bluetooth, start the “iCube configuration ”

in the U:fit fitting application and choose to use iCube

via USB cable.

When prompted by the wizard, connect the Mini USB

plug of the enclosed USB cable as indicated below.

Attach the other end of the cable to a USB socket of

your computer.

Use the optional USB hub accessory if there is no free

USB socket on your computer.

When connectin iCube for the first time via USB, your

computer will start searchin for the associated driver

software. Dependin on the operatin system, you

Autres manuels pour iCube

Table des matières

Autres manuels Unitron Prothèse auditive

Unitron

Unitron uMic Manuel utilisateur

Unitron

Unitron Stride B9-UP Manuel utilisateur

Unitron

Unitron Unison Manuel utilisateur

Unitron

Unitron Quantum Manuel utilisateur

Unitron

Unitron N Moxi Dura Pro Manuel utilisateur

Unitron

Unitron Moxi All Manuel utilisateur

Unitron

Unitron Latitude Shift Manuel utilisateur

Unitron

Unitron Moxi Kiss Manuel utilisateur

Unitron

Unitron Unison Manuel utilisateur

Unitron

Unitron Shine ITE Manuel utilisateur

Unitron

Unitron Stride P Pro Manuel utilisateur

Unitron

Unitron Connect SmartFocus Manuel utilisateur

Unitron

Unitron Next ITE series Manuel utilisateur

Unitron

Unitron Tandem Manuel utilisateur

Unitron

Unitron uMic Manuel utilisateur

Unitron

Unitron Quantum Pro ITE Manuel utilisateur

Unitron

Unitron Stride V-PR Manuel utilisateur

Unitron

Unitron Moxi V-R Manuel utilisateur

Unitron

Unitron Yuu Manuel utilisateur

Unitron

Unitron Conversa.NT Digital ITE Manuel utilisateur

Unitron

Unitron Quantum2 HP Manuel utilisateur

Unitron

Unitron uMic Manuel utilisateur

Unitron

Unitron uStream Manuel utilisateur

Unitron

Unitron uTV 2 Manuel utilisateur

Manuels Prothèse auditive populaires d'autres marques

Sonic

Sonic Bliss miniBTE Manuel utilisateur

Lexie

Lexie B1 Manuel de la liste des pièces

Widex

Widex FM+DEX Manuel utilisateur

Siemens

Siemens Triano Manuel utilisateur

Camplicomms

Camplicomms HC-200 Manuel utilisateur

Widex

Widex SUPER 220 S2-VSD Manuel utilisateur

Phonak

Phonak Q90 Manuel utilisateur

Williams Sound

Williams Sound SoundPlus WIR 237 Mode d’emploi

Oticon Medical

Oticon Medical Ponto SoundConnector Manuel utilisateur

Siemens

Siemens Life micon Manuel utilisateur

Starkey

Starkey Destiny Manuel utilisateur

Audicus

Audicus The Icon Manuel utilisateur

Advanced Bionics

Advanced Bionics Slim HP Standard Manuel utilisateur

Widex

Widex DREAM440 THE DREAM SERIES Manuel utilisateur

Phonak

Phonak myPilot Manuel utilisateur

NIKEN

NIKEN NK-401 Manuel utilisateur

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur

Sonetik

Sonetik GOHEAR Manuel utilisateur

Unitron iCube Manuel

Manuels Prothèse auditive populaires d'autres marques