Unit UT713 Manuel utilisateur

Model UT713

OPERATING MANUAL

TABLE OF CONTENTS

TITLE PAGE

Introduction

Unpacking Inspection

Safety Information

Turning the Calibrator On

Simulating a Thermocouple

Measuring a Thermocouple

Simulating TC or Source mV

Measure TC or mV

Cold Terminal Temperature Autocompensation

Explanation of International Symbols

Maintenance

Specifications

Temperature Measure and Thermocouple Simulate

Model UT713: OPERATING MANUAL

TABLE OF CONTENTS

TITLE PAGE

Thermocouple Standards and Scales

Millivolt Measure and Source

General Specifications

Model UT713: OPERATING MANUAL

Description

Operating Manual

Test Lead

Alligator Clip

9V Alkaline Battery (1604A or 6LF22)

Introduction

The UNI-T Model UT713Thermocouple Calibrator is a precise source and measurement

tool for calibrating thermocouple instruments. The calibrator sources or measures

mV or 8 different type of TC in units of , . But the Meter cannot uses as an output

source and measurement.

Item

Qty

1 piece

1 pair

1 piece

Unpacking Inspection

Open the package case and take out the Meter, check the following items carefully

to see any missing or damaged parts:

Model UT713: OPERATING MANUAL

Warning

Safety Information

This Meter complies with the standard CE EN61326.

To avoid possible electric shock or personal injury:

Before using the calibrator inspect the case. Do not use the calibrator

if it is damaged or the case (or part of the case) is removed. Look for

cracks or missing plastic.

During measurement, do not contact the naked wire, connector, unused

terminal or the circuit under test.

Inspect the test leads for damaged insulation or exposed metal. Replace

damaged test leads with identical model number or electrical

specifications before using the Meter.

When using the test leads, keep your fingers behind the finger guards.

Use the Meter only as specified in this operating manual, otherwise the protection

provided by the Meter may be impaired.

lNever apply more than 30V between any two terminals, or between any

terminal and earth ground.

Model UT713: OPERATING MANUAL

Replace the battery as soon as the battery indicator appears. With a

low battery, the Meter might produce false readings that can lead to

electric shock and personal injury.

The internal circuit of the calibrator shall not be altered at will to avoid

damage of the calibrator and any accident

Do not use or store the calibrator in an environment of high temperature,

humidity, explosive, inflammable and strong magnetic field. The

performance of the Meter may deteriorate after dampened

Under the influence of Radiated, Radio-Frequency Electromagnetic Field

phenomenon, the captioned model may malfunction and can self-recover

after the test.

When servicing the Meter, use only the same model number or identical

electrical specifications replacement part.

Constantly check the battery as it may lead when it has been using for

some time, replace the battery as soon as leaking appears. A leaking

battery will damage the calibrator.

Take out the battery when not using for a long time.

Model UT713: OPERATING MANUAL

Figure 1

Press so that

OUTPUT is on

the display

Press and to

increment or

decrement a digit.

Press and to step

up/down from 0 to 9 .

Hold down to scroll

faster

Output

Press TYPE to

select TC type or

DC mV

Press to toggle

positive or

negative

temperature

Show TC type or

voltage range

selected

Turning the Calibrator On

Press to turn the calibrator on and off

Press to toggle

Press to turn

the Meter on

and off

Output Terminals

Model UT713: OPERATING MANUAL

Figure 2

Show TC type or

voltage range

elected

Press so that

INPUT is on the

display

Input

Press to turn the

Meter on and off

Input Terminals

Display the

selected or

Press to toggle

Press Type to

select TC type or

DC mV

Model UT713: OPERATING MANUAL

1. Press the pushbutton to turn the Calibrator on.

2. Press OUTPUT to display OUTPUT if the Calibrator is at input mode which displays

INPUT.

3. Press to select the requested TC type or DC mV range.

4. Press or to increment or decrement a digit.

5. Press or to step up or down from 0 to 9. Hold down to scroll faster.

6. Insert the test leads to the OUPUT terminals as figure 3.

7. Connect the other end of the test leads to the TC measurement equipment or the

DC mV measurement equipment.

When connecting the calibrator to the auto ranging DC mV measurement equipment

or TC measurement equipment, it must lock the range.

Note:

Model UT713: OPERATING MANUAL

Figure 3

Measurement

equipment

Model UT713: OPERATING MANUAL

Table des matières

Autres manuels Unit Équipement de test

Unit

Unit UT361 Manuel utilisateur

Unit

Unit UT-P35 Manuel utilisateur

Unit

Unit UT522 Manuel utilisateur

Unit

Unit MSO2000 Series Manuel utilisateur

Unit

Unit UPO1000 Series Manuel utilisateur

Unit

Unit UTD2000M Manuel utilisateur

Unit

Unit UTD4000 Series Manuel utilisateur

Unit

Unit UPO1000X Series Manuel utilisateur

Unit

Unit UT673A Manuel utilisateur

Unit

Unit UT581 Manuel utilisateur

Unit

Unit UTG1000X Series Manuel du propriétaire

Unit

Unit UT-513A Manuel utilisateur

Unit

Unit UT712 Manuel utilisateur

Unit

Unit UT521 Manuel utilisateur

Unit

Unit utd2000 Manuel utilisateur

Unit

Unit UPO2102 Manuel utilisateur

Unit

Unit UT501B Manuel utilisateur

Unit

Unit UT528 Manuel utilisateur

Unit

Unit utd2000 Manuel utilisateur

Unit

Unit UT659A Manuel utilisateur

Unit

Unit UTD2025 series Manuel utilisateur

Unit

Unit UPO1000 Series Manuel utilisateur

Unit

Unit UT-586 Manuel utilisateur

Unit

Unit UPO3000E Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur