Uniden VP300 Manuel utilisateur

VP300

For more exciting new products please visit our website:

Australia: www.uniden.com.au

New Zealand: www.uniden.co.nz

Conference Phone System

Installation and PSTN (Analogue) Line Setup

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be

followed to reduce the risk of fire, electric shock and injury to persons, including

the following:

• This unit is NOT waterproof! DO NOT expose this unit to moisture.

• DO NOT expose this unit to rain.

• Do not use this product near water, for example, near a bath tub, wash bowl,

kitchen sink or laundry tub, in a wet basement or near a swimming pool.

• Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

• Do not use the telephone to report a gas leak in the vicinity of the leak.

• Use only the power cord indicated in this manual.

SAVE THESE INSTRUCTIONS!

Important Notice:

• Under power failure conditions this appliance may not operate. Please ensure

that a separate telephone, not dependent on local power, is available for

emergency use.

General Notices for New Zealand Model:

• The grant of a NZ Telepermit for any item of terminal equipment indicates only

that Telecom has accepted that the item complies with minimum conditions

for connection to its network. It indicates no endorsement of the product by

Telecom, nor does it provide any sort of warranty. Above all, it provides no

assurance that any item will work correctly in all respects with another item of

Telepermitted equipment of a different make or model, nor does it imply that

any product is compatible with all of Telecom’s network services.

• For telephone networks other than Telecom there may be a charge incurred for

local calls if the Insert 0 feature is on. Turn Insert 0 off.

• This equipment may not provide for the effective hand-over of a call to another

device connected to the same line.

CONTENTS

WHAT’S IN THE BOX? ......................................................................................... 4

INSTALLING YOUR PHONE ............................................................................... 5

GETTING TO KNOW YOUR PHONE ....................................................................7

Parts of the Phone .........................................................................................................................7

Keypad ..............................................................................................................................................8

USING YOUR PHONE ..........................................................................................9

USING THE MENU .............................................................................................11

Phonebook ....................................................................................................................................12

Call History .....................................................................................................................................13

Phone Setting ...............................................................................................................................14

PSTN Flash ..................................................................................................................................... 17

ONEYEAR LIMITED WARRANTY .....................................................................18

WHAT’S IN THE BOX?

• If any items are missing or damaged, contact your place of purchase

immediately. Never use damaged products!

• Need help? Get answers at our website:

www.uniden.com.au for Australian model

www.uniden.co.nz for New Zealand model.

Extra Microphone (up to 2)

AC Adaptor/Interface Module

RJ 45 Cable X 2

VP300 Conference Phone System

OPTIONAL ACCESSORIES

RJ 11 Cable

(Telephone Line Cord)

INSTALLING YOUR PHONE

For best performance of the VP300, avoid the following locations when

selecting an installation location:

• Areas with high background noise. The microphone(s) might pick up these

sounds and prevent the speakerphone from going into receiving mode when

you finish talking.

• Surfaces affected by vibration.

• Recessed areas such as in a corner, under a cupboard, or next to a cabinet.

These locations may cause an echo effect.

NOTE:

• The VP300 is properly installed for PSTN (land line) use if you press and hear

a dial tone - the display will show ‘PSTN Dialing’. Otherwise, recheck all the

installation steps.

• In the event of a power outage, the VP300 will not be able to make and receive

calls.

1. Plug one end of an RJ45 (Ethernet) cable into the EXT jack of the AC adaptor/

Interface module. Plug the other end into the POWER jack on the port bay of

the VP300.

See (1) on the connection diagram, page 6.

2. Plug the Telephone Line cord into the LINE jack on the AC adaptor/ Interface

module. Plug the other end into a telephone wall jack.

See (2) on the connection diagram.

3. Plug the AC adaptor/Interface power cord into a standard 240V AC power

outlet. The VP300 display will show ‘SYSTEM BOOTING...’ and then the standby

display. See (3) on the connection diagram.

4. For VoIP calls, and PC Web-Brower control of VP300 settings: Plug one end of

the second RJ45 (Ethernet) cable into the LAN jack of the VP300. Plug the other

end to an Ethernet jack for network/internet access.

See (4) on the connection diagram.

5. Plug the optional extra microphones into the EXT1 and EXT2 jacks of the

VP300.See (5) & (6) on the connection diagram.

CAUTION:

To reduce risk of personal injury, fire, or damage, use only the power adaptor

supplied with this product.

INSTALLING YOUR PHONE

Ethernet jack

Wall phone jack

Connection Diagram

1. RJ45 Cable

2. Telephone Line Cord

3. Power Cord

4. RJ45 Cable

5. Extra Microphone 1 (Optional)

6. Extra Microphone 2 (Optional)

GETTING TO KNOW YOUR PHONE

Parts of the Phone

1. LCD

2. Microphone

3. Keypad

4. Speaker

Keypad

Navigation

Keys

Volume

Conference

VoIP

Selection/Soft

Keys

SIP Keys

Mute

Hold

Redial

On/Off

LCD

Dial Keypad

Keys What it does

Navigation Keys - Helps you navigate through various

options.

OK - Select a particular setting.

VOLUME - Helps you decrease/increase the speaker/ringer

volume.

MUTE - Mute the microphone.

REDIAL - Dial the last dialed number.

HOLD - Places the call on hold.

CONFERENCE - Hold a 3-way conference; two more participants

can join the call.

VoIP - Use this button to make a VoIP call.

Selection/Soft Keys - Helps you select the options that are

displayed on the LCD.

MENU - Displays all the available settings and options.

ON/OFF - Use this button to make a PSTN call.

Use this button to answer or end PSTN & VoIP calls.

SIP Keys - For VoIP function (see VoIP manual)

USING YOUR PHONE

Dial a Call

PSTN Line

VoIP Line

To make a call through the PSTN line:

Press and dial the phone number.

To make a call through the VoIP line:

1. Press and dial the phone number.

Answer a Call

You can make a call either through VoIP or PSTN line.

#Receive Another Call

Mute a Call

By muting a call, you can hear the other party but they cannot hear you.

To answer an incoming PSTN call, press .

The LCD displays ‘PSTN in use’.

When you are on call, and another call comes

in you will hear a call waiting tone.

To mute/unmute a call, press . The LCD displays the letter ‘M’.

Hold a Call

When you place a call on hold, both the parties involved in the call cannot hear

each other.

To place a call on hold, press . The LCD displays ‘HOLD’.

Press again to resume the call.

The LCD displays ‘PSTN Dialing’.

The LCD displays ‘IP Dialing’.

Flashing red LEDs indicate an incoming call.

Red LEDs indicate that a call is muted.

Flashing blue LEDs indicate that a call is put on hold.

End a Call

To end a call, press .

To setup the VP300 for VoIP calls, you will need to use PC and web browser, refer to the

VP300 VoIP Owner’s Manual on the Uniden website. (Australia: www.uniden.com.au,

New Zealand: www.uniden.co.nz)

Redial a Call

Press to dial out the last dialed number.

Conference Call

To activate a three-way conference call, follow the steps below:

1. Press , the LCD will display ‘IP Dialing’, dial a phone number.

2. Wait for the call to be answered, then press . The LCD will display, ‘PSTN

Dialing’, dial a phone number.

3. After the call is answered, press to enter a 3-way conference mode.

Record a Conversation

#This feature requires and options SD card.

◊ Press the MORE soft key to show the REC soft

key option. Press the REC soft key to record a

conversation.

◊ Press the STOP soft key to stop recording.

◊ Press the PAUSE soft key to pause recording and

press REC to continue recording.

◊ Press the NEXT or PREV soft key to play the

recording.

Call Waiting

You can record a conversation using the VP300

phone conference system.

For Australia:

Press FLASH soft key and then press 2 to accept the

waiting call. The first caller is put on hold, and you will

hear the new caller after a short pause. To return to the

original caller, press FLASH soft key and then 2 again.

For details on the Flash time settings, please refer to page 17.

For New Zealand:

Press FLASH soft key to accept the waiting call. The first caller is put on hold, and

you will hear the new caller after a short pause. To return to the original caller,

press FLASH soft key again.

REC PAUSE MORE

STOP

PREV MORE

STOP NEXT

Call Waiting, a service available from your telephone provider, lets you receive calls

while you are on another call. If you get a call when you are on another call, the

phone can sound a tone to notify you of the waiting call.

MENU FLASH DND MORE

#To make a conference call, you need to ensure that you are connected to VoIP

and PSTN line.

To setup the VP300 for VoIP calls, you will need to use PC and web browser, refer to the

VP300 VoIP Owner’s Manual on the Uniden website.

The selection/soft keys enable you to select the options displayed on the LCD. Press the

MORE soft key to see the additional soft keys.

Selection/Soft Keys

Table des matières

Autres manuels Uniden Téléphone de conférence

Uniden

Uniden FP106 Manuel utilisateur

Manuels Téléphone de conférence populaires d'autres marques

Polycom

Polycom SoundStation 2W Manuel de service

Vixtel

Vixtel glass 1100 Manuel utilisateur

Oregon Scientific

Oregon Scientific OS200 Manuel utilisateur

Polycom

Polycom SoundStation IP 4000 Manuel utilisateur

AbleNet

AbleNet Prism C Manuel utilisateur

Albrecht

Albrecht Multicom Manuel utilisateur

Fortinet

Fortinet FortiFone FON-C70 Manuel utilisateur

Avaya

Avaya B159 Series Manuel utilisateur

Konftel

Konftel Konftel 55W Manuel utilisateur

Mitel

Mitel 6867i Premium Manuel utilisateur

Polycom

Polycom SoundStation 2W Manuel de service

Yealink

Yealink CP920 Manuel utilisateur

Polycom

Polycom SoundStation IP 6000 Manuel utilisateur

Mitel

Mitel 6970 IP Manuel utilisateur

Yealink

Yealink CPE860 Guide de dépannage

Konftel

Konftel 60W Manuel utilisateur

Mitel

Mitel UC360 Manuel utilisateur

Cortelco

Cortelco CP4400 Series Guide de configuration