UMAX Technologies PowerLook 1100 Manuel utilisateur

PowerLook 1100

Color Scanner

Operation Manual

Thank you for purchasing the PowerLook 1100 color scanner. With PowerLook 1100 color scanner, you

can easily scan documents and photographs into your computer and maintain them as electronic copies.

Main Features:

• High Resolution and Density Range: With a resolution of up to 9600 dpi and high density range, it

produces better gamma transformation, and a more accurate detection of highlight and shadow details,

thereby allowing even distribution of colors.

• High Scanning Speed, Low Acoustic Noise: The scanner’s micro stepping technology greatly

increases scanning speed and at the same time reduces noise level.

• Intelligent Scanning Control Interface called MagicScan: MagicScan provides a comprehensive

range of scanning control functions. Completing the package are the bundled award-winning and

proven software packages such as binuscan PhotoPerfect.

• Transparency Adapter: Allows the scanning of films, slides, and transparencies up to the full-size

scanning area: 8.5” x 10”.

• Proprietary Image Noise Reduction: Your scanner uses a sealed optical system design that blocks

dust particles and excess reflections from penetrating the optical unit, thereby overcoming image and

optical noise and ensuring sharp, true-life images.

System Requirements:

For PC users: Pentium or higher, CD-ROM drive, hard drive with 50MB free disk space, 64MB memory,

Microsoft Windows 98 SE (Second Edition), Windows 2000, Windows-compatible keyboard, display, and

mouse. Recommended: SVGA or higher graphics card.

For Mac users: Power Macintosh, New Power Mac G3, G4 with built-in FireWire® port, CD-ROM drive,

hard drive with 50MB free disk space, 64MB memory, higher, FireWire Extension 2.1 or higher.

Important Safeguards

• Read all of the instructions.

• Save these instructions for later use.

• Follow all warning and instructions marked on the product.

• When replacement parts are required, be sure that service technicians have used replacement parts

that conform to at least the same safety standards with regard to fire, electric shock, or other

hazards.

• Do not use this product near water or in rainy/moist environment

• Do not place the scanner on an uneven surface which may cause serious damage to the product.

• The product should be operated only from the type of power source indicated on the marketing

label.

• Do not attempt to service this product yourself as opening or removing the enclosure may expose

you to dangerous voltage or other hazards.

• This unit has input circuitry suitable for a 100~240VAC supply.

• The sound level at the operators position according to IEC 704-1:1982 should be less than or equal

to 70dB(A).

Contents

Quick Start Guide…………………………………………………………………………………………...4

Unpack your Scanner…………………………………………………………………………………..4

Unlock your Scanner…………………………………………………………………………………..4

Connect the FireWire (IEEE 1394) Cable……………………………………………………………..4

Connect the Power……………………………………………………………………………………..4

Power Up………………………………………………………………………………………………4

Software Installation…………………………………………………………………………………...4

Chapter 1. Getting Started…………………………………………………………………………………5

Before You Begin………………………………………………………………………………………….5

Unpack Your Scanner……………………………………………………………………………………………5

Static Electricity Precautions…………………………………………………………………………………..5

A Glance at Your Scanner…………………………………………………………………………………5

Prepare the Scanner………………………………………………………………………………………...6

Unlock the Optical Assembly of the Scanner…………………………………………………………………6

Test the Scanner………………………………………………………………………………………………….7

Care and Maintenance Tips………………………………………………………………………………...7

Chapter 2. Macintosh Installation…………………………………………………………………………8

Connect the Scanner to Your Computer…………………………………………………………………...8

Installing the Software……………………………………………………………………………………..8

Chapter 3. PC Installation…………………………………………………………………………………9

Installing the Software……………………………………………………………………………………..9

IEEE 1394 Interface Card Installation……………………………………………………………………..9

Connect the Scanner to the Computer…………………………………………………………………….10

Chapter 4. How to Use Frame Holder…………………………………………………………………...11

How to Scan with scan Frames…………………………………………………………………………...11

Multiple Scanning Using the A4/35mm Slide Tray………………………………………………………...11

Chapter 5. Troubleshooting Tips………………………………………………………………………...13

General Approach………………………………………………………………………………………...13

LED Indicators…………………………………………………………………………………...……….14

Appendix A: Scanner Specifications……………………………………………………………………..15

Glossary…………………………………………………………………………………………………….16

Quick Start Guide

This section serves as a quick reference to the connection and installation procedures for the

PowerLook 1100 scanner.

1. Unpack your Scanner

Unpack your scanner. Make sure that all the scanner system hardware, software, cabling, and

documentation items indicated on the packing list are present.

2. Unlock your Scanner

Before using your scanner ensure that the carriage lock of scanner is in the unlocked position. Insert

a coin in the thumbscrew of the optical assembly lock and turn it firmly counterclockwise to unlock

the optical assembly to avoid damaging the optics during transportation.

3. Connect the FireWire (IEEE 1394) Cable

Connect the FireWire (IEEE 1394) cable to the built in port of host and the other end of the cable to

the scanner.

4. Connect the Power

Connect the power cord to the scanner and plug the other end of the power cord into an available

outlet (socket).

5. Power Up

a) Turn the scanner power switch on. When the Ready indicator is on, your scanner is ready to

use.

b) Turn on your computer.

6. Software Installation

We recommend that you install your image editing software first and then MagicScan.

a) Insert UMAX MagicScan CD into your CD-ROM drive.

b) Double-click on the MagicScan installer icon to start installation.

c) Follow the on-screen instructions to completely install MagicScan.

Chapter 1. Getting Started

Your PowerLook 1100 scanner is extremely user-friendly. Hardware and software installation can

be completed in a few steps. In minutes you can start operating your scanner to see for yourself the

kind of quality scanned images it can produce.

This chapter tells you how to prepare your scanner for connection and installation. It also gives

some handling precautions and general care measures to ensure that your scanner will stay in top

condition at all times.

Before You Begin

Unpack Your Scanner

Ensure that your package contains all the hardware, software, cabling, and documentation you

ordered. Check for any damage that may have occurred while the package was in transit. If there

are any missing or damaged items in your scanner package, contact your dealer or the carrier of your

package immediately.

Static Electricity Precautions

Static Electricity (in your body) can cause damage to the electronic components on the scanner’s

printed circuit board or the computer’s interface card. Therefore, you need to discharge static build-

up from your body before handling any card or component outside of its anti-static packaging.

To protect your equipment from static discharge, you are advised to closely follow these measures:

• Discharge any static build-up in your body by touching a grounded or anti-static surface (such

as a large metal object or the silver-toned expansion slot covers at the rear of your computer).

Do this prior to removing any electronic components from their anti-static bags.

• When handling any electronic components, avoid touching any metal part of the component

such as the gold “fingers” that plug into the expansion slot. It is best to handle system

components either by their edges or by their mounting brackets.

A Glance at Your Scanner

Take a few minutes to become familiar with the different parts of the scanner. The figure below

shows the locations and names of the scanner parts. A brief description of each par is also given.

• Object Glass – The glass surface on which the document or image for scanning is placed;

made of tempered glass with excellent optical qualities.

• Document Cover – The plastic cover over the object glass. Can be raised or lowered to cover

a document.

• LED Indicators – Three indicators – Power, Ready, and Option.

• Optical Assembly Lock – Locks the scanner’s optical component system.

• Power Switch – Used for turning the scanner power ON and OFF.

• FireWire (IEEE 1394) Connector – Where you plug in the FireWire (IEEE 1394) cable.

• UTA Connector – A connector used to connect the optional UMAX Transparency Adapter.

• Power Cord Connector – Where you plug in the scanner power cord.

Front View

Rear View

Prepare the Scanner

Prepare your scanner for installation through the following simple steps:

• Unlock the optical assembly

• Run the automatic scanner self-test

Unlock the Optical Assembly of the Scanner

Insert a coin in the thumbscrew of the optical assembly lock and turn it firmly counterclockwise.

Before attempting to transport your scanner, it is important that you lock the optical assembly in

place to avoid any possible damage to the scanner’s optical components. To lock the optical

assembly, insert a coin and turn it until points to the lock mark.

Test the Scanner

The scanner automatically performs a simple self-test each time it is turned on. This self-test checks

the status of certain scanner devices.

Connect the power cord to a wall outlet.

Connect the other end of the power cord to the scanner.

Turn on the power to the scanner.

At power-on, the front panel indicators flash once. The power indicator then glows and the ready

indicator blinks. When the test is completed, the power and ready indicators glow steadily.

Care and Maintenance Tips

Regularly clean the object glass of the scanner and the transparency adapter to prevent dirt or

smudge build-up that may reduce the quality of your scanned images. Before you clean the object

glass, make sure the scanner is off and the power cord is unplugged.

Clean the object glass of the scanner and the transparency adapter with a soft damp cloth and a mild

detergent or alcohol.

Note: Avoid spraying cleaning fluid directly on the object glass. This may cause the liquid to

penetrate the seams around the glass and contaminate the mirrors and lenses inside the

scanner. Spray the liquid on the cleaning cloth then wipe the glass clean.

Be sure that nothing covers the calibration area. It is important to keep the calibration area clean

since dust or smudge marks on the glass will reduce the quality of scanned transparencies. Make

sure the transparency fits in the scanning area.

Do not leave transparencies on the object glass of the scanner for excessive periods of time. The

warmth of the scanner and transparency adapter lamps may cause them to deteriorate. Please, use

the Frame holder to secure the transparencies for scanning.

Chapter 2. Macintosh Installation

This chapter describes how you can use your scanner with your Macintosh computer.

Connect the Scanner to Your Computer

1. Connect the FireWire cable to your Macintosh’s FireWire port and connect the other end of the

FireWire cable to the scanner.

Connect the power cord to the scanner. And connect the other end of the power cord to a

grounded power socket.

Turn on the scanner power.

Turn on the computer power.

Installing the Software

Install the software in the following order:

Image Application Software, e.g. Adobe PhotoShop.

Then MagicScan.

Then binuscan PhotoPerfect if needed.

MagicScan is the interface used by application software to control UMAX scanners. Its advanced

controls allow precise adjustments in images even during the initial scan.

For detailed information on installing the software, refer to the Installation section of the Image

Application Software User’s Guide and MagicScan Electronic Books.

Chapter 3. PC Installation

This chapter describes how you can connect and use the PowerLook 1100 scanner with your IBM

PC or compatible computer.

Installing the Software

Install the software in two easy steps, in the following order:

Image Application Software, e.g. Adobe PhotoShop.

Then MagicScan.

Then binuscan PhotoPerfect if needed.

Notes: If installation program does not show up automatically, please follow the procedure to

install:

Choose RUN from Start menu and type d:\setup (where “d” indicates CD-ROM drive), then

click OK.

Double-click the Read Me icon in the MagicScan group for important up-to-date

information that may not be included in the manual. If there are any problems with the

icons in MagicScan group, double-click the Help icon in the MagicScan group.

MagicScan is the interface used by application software to control UMAX scanners. Its advanced

controls allow precise adjustments in images even during the initial scan.

For detailed information on installing the image editing application software, refer to the Installation

section of the Image Editing Application Software User’s Guide.

IEEE 1394 Interface Card Installation

Before you can use your scanner with your computer, you need to install the IEEE 1394 interface

card into your PC.

To install the card into one of the computer’s expansion slots, observe the following procedures:

Note: The interface card is sensitive to static electricity. Handle the card by its mounting bracket,

particularly when removing the card from its anti-static packaging.

Turn the computer power off and unplug the power cord.

Remove the housing cover of the computer. Follow the instructions provided in your PC’

reference manual.

Remove the metal cover corresponding to your chosen slot. Keep the removed screw so that it

can be used to fasten the interface card.

Gently insert the interface card into the slot until it is firmly seated in the slot.

Secure the card into place with the screw removed from the expansion slot cover in step 3

above.

Replace the housing cover following the instructions provided in the computer’s reference

manual.

Connect the Scanner to the Computer

With settings on the scanner and card correctly set and the interface card properly installed in your

computer, you can now connect the scanner and the computer, as follows:

Connect the IEEE 1394 cable connector to the interface card in the PC.

Connect the other end of the IEEE 1394 cable to the scanner.

Connect the power cord to the scanner.

Turn on the scanner power.

Turn on the computer power.

Hardware installation is now complete.

Get ready to run the UMAX Setup program to install the supporting UMAX software supplied with

your system.

Table des matières

Autres manuels UMAX Technologies Scanner

UMAX Technologies

UMAX Technologies Astra 1600U Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 1220 Series Manuel

UMAX Technologies

UMAX Technologies MIRAGE IISE Manuel utilisateur

UMAX Technologies

UMAX Technologies AV210 Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 1220 Series Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 3400 Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 4400 Manuel utilisateur

UMAX Technologies

UMAX Technologies PowerLook 1000 Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 610S Manuel utilisateur

UMAX Technologies

UMAX Technologies AstraNET e3420 Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 2100U Manuel utilisateur

UMAX Technologies

UMAX Technologies 3450 Manuel utilisateur

UMAX Technologies

UMAX Technologies PowerLook PowerLook III Manuel utilisateur

UMAX Technologies

UMAX Technologies AstraNET e5420 Manuel utilisateur

UMAX Technologies

UMAX Technologies PowerLook 1000 Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 4000 Manuel utilisateur

UMAX Technologies

UMAX Technologies PowerLook 180 Manuel utilisateur

UMAX Technologies

UMAX Technologies PowerLook 1120 Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 2400S Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra MX3 Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 600P Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 1200S Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 2200 Manuel utilisateur

UMAX Technologies

UMAX Technologies Astra 4700 Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur