UfiSpace T77I868.00 Manuel utilisateur

Outdoor LoRa Gateway

Installation Quick Guide

1Contents of delivery

5Cabling

Network Access

Model List

Installation

4Optional Accessories Recommended

Wall Mount

Pole Mount

Install Surge Protection Cable

Install 8 dBi Antenna

Appendix A

Declarations of Conformity and

Regulatory Information

Preparing the Installation

Connectors and Interfaces

All product specications are subject to change without notice

This is a quick reference guide for

uSpace Outdoor LoRa Gateway installation. This gateway

is designed for outdoor wall or pole mount installations.

1 x LTE

0 dBi antenna

1 x Installation

Quick Guide

1 x User Manual

User Manual

1 x Antenna extension cable (for 3, 5, 6, 7, 8 or 9 dBi LoRa antenna, cable length 60.96 3cm)

This Outdoor LoRa Gateway is designed with Semtech Technology to provide low

power and wide area (LPWA) unlicensed band wireless connection. This gateway

supports connectivity for wide range of Internet of Things (IOT) applications.

1 Contents of Delivery

Items

1x Outdoor LoRa Gateway with water protection cap on N-Type connector ports

Metal Caps: V2.1 HW (3 for LTE version, 2 for non-LTE version); V1.5 HW (1 for LTE version, 0 for non-LTE version)

1x Outdoor LoRa Gateway User Manual and Installation Quick Guide

1x LTE 0 dBi antenna (only for model with LTE function)

1x Screw kit

2x Hose clamp

1x Surge protection cable

1x Mounting bracket

1x GPS antenna (for v2.1 HW only, cable length 120 5cm)

All product specications are subject to change without notice

- 2 -

2 x Hose clamp1 x GPS anttena 1 x Surge protection cable 1 x Mounting bracket

1 x Screw kit

1 x Antenna

extension cable

1 x Outdoor LoRa Gateway

with water protection cap on

N-Type connector ports

2 Preparing the Installation

Caution

Must make sure all antennas are installed properly before apply PoE power to the gateway.

For un-connected N-Type Antenna Port, MUST install a " N-Type Water Protection Cap" to

prevent water leaking into the device. " N-Type Water Protection Caps" are supplied with

the gateway. MUST not install or remove GPS, LoRa or LTE Antenna when DC power is

applied to the Gateway. It may damage the device.

Surge Protection Cable must be properly connected to gateway housing and earth ground.

Connectors and Interfaces

269

184

37.2

134

210

LoRa Antenna #1 (main)

GPS Antenna

LoRa Antenna #2 (secondary, optional)

LTE Antenna 48 VDC-IN/ PoE Pressure Vent

All product specications are subject to change without notice

- 3 -

V2.1 Gateway

269

184

35.44

134

210

LoRa Antenna LTE Antenna (optional)

LTE Antenna 48 VDC-IN/ PoE Pressure Vent

V1.5 Gateway

3 Installation

Wall Mount

Mounting bracket to walls

Our mounting bracket is designed for both wall and pole mount.

1Drill 4 holes on the designated wall.

2Locking the expansion nail for bracket. (Maximum 40Kg.cm torque for M5 nuts)

3After locking eache nut, reverse 3~4 turns on wall.

4Secure the bracket onto the wall with 6 screws and must sure it is level.

Install Expansion Nail for Mounting Bracket

Install the Outdoor Gateway housing to the bracket with 6 screws

All product specications are subject to change without notice

- 4 -

Using expansion nail for wall mount

Screws for mounting bracket

to gateway (SUS304 T=1.6mm)

Screw M5, Length 12mm

V2.1 Gateway

Pole Mount

All product specications are subject to change without notice

- 5 -

V2.1 Gateway

V1.5 Gateway

Vertical and Horizontal Mount Install Hose Clamp

Upright pole

Minimum OD 35mm

Maximum OD 110mm

Minimum OD 40mm

Maximum OD 120mm

Maximum 55Kg.cm torque for hose clamp

Horizontal pole

All product specications are subject to change without notice

- 6 -

Horizontal direction clamp through hole

Upright direction clamp hole

Connecting Earth Ground to Unit

Warning

The equipment has a separate protective earthing terminal on the chassis that must be permanently connected to

earth ground to adequately ground the chassis and protect the operator from electrical hazards.

The product shall be installed by a qualied service person and the installation shall conform to all local codes.

Caution

Before equipment installation begins, ensure that a service personnel has attached an appropriate grounding lug to

the grounding cable that you supply.

Power installation must be performed with qualied electrician and followed with National Electrical Code,

ANSI/NFPA 70 and Canadian Electrical Code, Part I, CSA C22.1.

Warning

At rst before powered on, connect the frame of the unit to earth.

For earthing wire, green-and-yellow insulation is required and the cross-sectional area of the conductor must be

more than 10 AWG.

1Connect one end of the grounding cable to a proper earth ground.

2Place the grounding lug attached to the grounding cable over the protective earthing terminal.

3Secure the grounding lug to the protective earthing terminal with the washers and screws.

4Dress the grounding cable and ensure that it does not touch or block access to other components.

To connect earth ground to Unit

Install Surge Protection Cable

Install the LoRa Antenna

Surge Protection Cable must be properly connected to gateway housing and earth ground.

LoRa Antenna

Antenna port water leakage enhancement

Recommend to apply 3M (2166) waterproong tape on antenna port to enhance water

leakage protection.

All product specications are subject to change without notice

- 7 -

Screw nut

Spring washer

Flat washer

Antenna

Pole ø35-50mm

M6 Utype screw

ø7.50

Screw M5, Length 12mm

Surge Protection Cable

V2.1 Gateway

Install GPS Antenna

4 Optional Accessories Recommended

Items

LoRa 3, 5, 6, 7, 8 or 9 dBi antenna

LoRa 0 dBi antenna (optional, for direct connecting to Gateway N-Type connector application, without antenna extension cable)

LoRa 3 dBi antenna (optional, for direct connecting to Gateway N-Type connector application, without antenna extension cable)

PoE Adapter (60 Watts)

All product specications are subject to change without notice

- 8 -

LoRa

0 dBi antenna

60 Watts

PoE Adapter

LoRa

3 dBi antenna

LoRa

3, 5, 6, 7, 8 or 9 dBi antenna

2 screws

5 Cabling

All product specications are subject to change without notice

- 9 -

LoRa Antenna #1 LoRa Antenna #2

(optional)

LTE Antenna

PoE Adapter

GPS Antenna

3.3VDC output

for supporting

3.3V Active

GPS Antenna

V2.1 Gateway

LoRa Antenna #1

LTE Antenna

PoE Adapter

V1.5 Gateway

6 Network Access

Use Default Conguration

Caution

The backhaul network conguration on Outdoor LoRa Gateway supports several connection types

which can be selected as primary and secondary WAN. When device power up, it tries to bring up

primary WAN interface. If primary WAN is not available, the device will try to bring up the secondary

WAN interface. Device still continue to try to monitor the availability of the primary WAN interface.

Once primary interface is ready, device will switch to primary WAN immediately and shutdown

secondary WAN.

The primary WAN is congured as Ethernet with DHCP client through the PoE connectivity. On the

device with LTE support, LTE is congured as secondary WAN. In the installation environment, there

is no extra conguration is needed if a DHCP server is available through Ethernet connection. For

making device to have sucient interface parameters, following information has to be supplied by

DHCP server:

[Device IP] [Device Netmask] [Default Gateway] [DNS server]

All product specications are subject to change without notice

- 10 -

Must make sure all antennas are installed properly before apply PoE power to the gateway.

For un-connected N-Type Antenna Port, MUST install a " N-Type Water Protection Cap" to

prevent water leaking into the device. " N-Type Water Protection Caps" are supplied with

the gateway. MUST not install or remove GPS, LoRa or LTE Antenna when DC power is

applied to the Gateway. It may damage the device.

Surge Protection Cable must be properly connected to gateway housing and earth ground.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels UfiSpace Porte

UfiSpace

UfiSpace S9502-16SMT Manuel

UfiSpace

UfiSpace GEE810E-868U Manuel utilisateur

UfiSpace

UfiSpace S9501-18SMT Manuel

UfiSpace

UfiSpace S9502-16SMT Manuel

UfiSpace

UfiSpace LoRa GPE810U Manuel utilisateur

UfiSpace

UfiSpace S9510-30XC Manuel

UfiSpace

UfiSpace S9502-12SM Manuel

UfiSpace

UfiSpace S9510-28DC Manuel

UfiSpace

UfiSpace S9500-22XST Manuel

UfiSpace

UfiSpace S9500-30XS Manuel

UfiSpace

UfiSpace S9501-28SMT Manuel

UfiSpace

UfiSpace Outdoor R1 Series Guide de l'utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur