Udoo VISION Manuel utilisateur

UDOO VISION

Next-gen Open hardware SBC picoITX with Intel®

Apollo Lake family of SoCs

VISION

This manual is released under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) license

Every effort has been made to ensure the accuracy of this manual. However, SECO S.p.A. accepts no responsibility for any inaccuracies, errors or omissions herein.

SECO S.p.A. reserves the right to change precise specifications without prior notice to supply the best product possible.

Some of the information found in the UEFI BIOS SETUP Chapter has been extracted from the following copyrighted Insyde Software Corp. documents:

InsydeH2O Setup Utility - User Reference Guide

To get the required assistance for any and possible issues, please contact us using the dedicated web form available at http://www.udoo.org/customer-

care/open.php.

Our team is ready to assist.

Revision

Date

Note

Ref

1.0

15th June 2021

First Official Release.

REVISION HISTORY

 
 VISION 
UDOO VISION User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by M.B. Copyright © 2021 SECO S.p.A 

INDEX 
 INTRODUCTION.......................................................................................................................................................................... 6 
1 Warranty...............................................................................................................................................................................................................................7 
2 Information and assistance.....................................................................................................................................................................................................8 
3 RMA number request.............................................................................................................................................................................................................8 
4 Safety...................................................................................................................................................................................................................................9 
5 Electrostatic discharges.........................................................................................................................................................................................................9 
6 RoHS compliance ...............................................................................................................................................................................................................10 
7 Labels................................................................................................................................................................................................................................10 
8 FCC certification..................................................................................................................................................................................................................11 
9 Terminology and definitions ..................................................................................................................................................................................................12 
10 Reference specifications......................................................................................................................................................................................................14 
 OVERVIEW ................................................................................................................................................................................15 
1 Introduction.........................................................................................................................................................................................................................16 
2 Technical specifications.......................................................................................................................................................................................................17 
3 Electrical specifications........................................................................................................................................................................................................18 
3.1 RTC Battery .....................................................................................................................................................................................................................................18 
3.2 Power consumption..........................................................................................................................................................................................................................19 
3.3 Power rails naming convention ...........................................................................................................................................................................................................20 
4 Mechanical specifications.....................................................................................................................................................................................................21 
5 Block diagram.....................................................................................................................................................................................................................22 
 CONNECTORS..........................................................................................................................................................................23 
1 Introduction.........................................................................................................................................................................................................................24 
2 Connectors overview...........................................................................................................................................................................................................25 
3 Connectors description........................................................................................................................................................................................................26 
3.1 Ethernet connectors..........................................................................................................................................................................................................................26 
3.2 USB ports........................................................................................................................................................................................................................................27 
3.3 S-ATA Connectors............................................................................................................................................................................................................................28 
3.4 eDP connector.................................................................................................................................................................................................................................29 
3.5 miniDP++ Connector.........................................................................................................................................................................................................................30 
3.6 Audio interfaces................................................................................................................................................................................................................................31 
3.7 Buttons / LED header........................................................................................................................................................................................................................32 
3.8 M.2 2260/3042 Socket 2 Key B SSD/WWAN Slot...............................................................................................................................................................................33 
3.9 M.2 2230 Socket 1 Key E Connectivity Slot.........................................................................................................................................................................................35 

 
 VISION 
UDOO VISION User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by M.B. Copyright © 2021 SECO S.p.A 

3.10 μSD + miniSIM Combo Slot...............................................................................................................................................................................................................36 
3.11 COM Port Header.............................................................................................................................................................................................................................37 
3.12 FAN Connector ................................................................................................................................................................................................................................38 
3.13 Recovery Switch...............................................................................................................................................................................................................................38 
3.14 GPIO Header ...................................................................................................................................................................................................................................38 
3.15 ARDUINOTM interface.........................................................................................................................................................................................................................39 
 BIOS SETUP..............................................................................................................................................................................40 
1 Aptio setup Utility.................................................................................................................................................................................................................41 
2 Main setup menu ................................................................................................................................................................................................................42 
2.1 System Time / System Date...............................................................................................................................................................................................................42 
3 Advanced menu..................................................................................................................................................................................................................43 
3.1 Trusted computing submenu..............................................................................................................................................................................................................44 
3.2 ACPI Settings submenu.....................................................................................................................................................................................................................44 
3.3 S5 RTC Wake Settings submenu .......................................................................................................................................................................................................45 
3.4 CPU Configuration submenu..............................................................................................................................................................................................................46 
3.5 AMI graphic Output Protocol Policy submenu....................................................................................................................................................................................... 47 
3.6 PCI Subsystems Settings ..................................................................................................................................................................................................................47 
3.7 Network Stack configuration submenu ................................................................................................................................................................................................48 
3.8 CSM configuration submenu..............................................................................................................................................................................................................48 
3.9 NVMe configuration submenu ............................................................................................................................................................................................................49 
3.10 SDIO configuration submenu..............................................................................................................................................................................................................49 
3.11 USB configuration submenu...............................................................................................................................................................................................................49 
3.12 Platform Trust technology submenu ....................................................................................................................................................................................................50 
3.13 Main Thermal Configuration submenu..................................................................................................................................................................................................50 
3.14 HSUART Transceiver Configuration submenu.......................................................................................................................................................................................50 
3.15 Embedded Controller submenu..........................................................................................................................................................................................................51 
3.16 M.2 peripheral management submenu................................................................................................................................................................................................54 
4 Security menu.....................................................................................................................................................................................................................55 
5 Power menu.......................................................................................................................................................................................................................56 
5.1 Advanced CPU control submenu........................................................................................................................................................................................................58 
5.2 EC Watchdog Configuration submenu.................................................................................................................................................................................................59 
5.3 Thermal Zone configuration submenu..................................................................................................................................................................................................59 
6 Boot menu..........................................................................................................................................................................................................................60 
6.1 Legacy submenu..............................................................................................................................................................................................................................62 
7 Exit menu ...........................................................................................................................................................................................................................63 
 APPENDICES.............................................................................................................................................................................64 

VISION

5.1 Thermal Design...................................................................................................................................................................................................................65

5.2 Accessories........................................................................................................................................................................................................................66

5.2.1 Metal case.......................................................................................................................................................................................................................................66

VISION

•Warranty

•Information and assistance

•RMA number request

•Safety

•Electrostatic discharges

•RoHS compliance

•Labels

•FCC certification

•Terminology and definitions

•Reference specifications

VISION

1.1Warranty

This product is subject to the Italian Law Decree 24/2002, acting European Directive 1999/44/CE on matters of sale and warranties to consumers.

The warranty on this product lasts for 2 years.

Under the warranty period, the Supplier guarantees the buyer assistance and service for repairing, replacing or credit of the item, at the Supplier’s own discretion.

Items cannot be returned unless previously authorized by the supplier.

The authorization is released after completing the specific form available on the web-site http://www.udoo.org/customer-care/ (Open a New Ticket →Return

Merchandise Application). The RMA authorization number must be put both on the packaging and on the documents shipped with the items, which must include all

the accessories in their original packaging, with no signs of damage to, or tampering with, any returned item.

The error analysis form identifying the fault type must be completed by the customer and has must accompany the returned item.

Following a technical analysis, the supplier will verify if all the requirements, for which a warranty service applies, are met. If the warranty cannot be applied, the

Supplier will calculate the minimum cost of this initial analysis on the item and the repair costs. Costs for replaced components will be calculated separately.

Warning!

All changes or modifications to the equipment not explicitly approved by SECO S.p.A. could impair the equipment’s functionalities and could

void the warranty

VISION

1.2Information and assistance

What do I have to do if I’m experiencing problems with my product?

The following services are available:

•UDOO website: visit http://www.udoo.org to receive the latest information on the product. In most cases it is possible to find useful information to solve the

problem.

•UDOO Forum: join to the community of UDOO users. In the forum, available at http://www.udoo.org/forum/, it is possible to search the multiple topics of the

community, and look for other users that had the same kind of problem - and how they solved it. It is also possible to post new topics to ask for specific

help.

•Repair centre: it is possible to send the faulty product to the SECO Repair Centre. In this case, follow this procedure:

oReturned items must be accompanied by a RMA Number. Items sent without the RMA number will be not accepted.

oReturned items must be shipped in an appropriate package. SECO is not responsible for damages caused by accidental drop, improper usage, or

customer neglect.

Note: Please have the following information before asking for technical assistance:

•Name and serial number of the product;

•Description of Customer’s peripheral connections;

•Description of Customer’s software (operating system, version, application software, etc.);

•A complete description of the problem;

•The exact words of every kind of error message encountered.

1.3RMA number request

To request a RMA number, please visit UDOO web-site. On the bottom of the page, please select “Customer Care”, click on the “Open a New ticket”button and.

A RMA Number will be sent within 1 working day (only for on-line RMA requests).

VISION

1.4Safety

The UDOO VISION board uses only extremely-low voltages.

While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.

CE and FCC certification retained using only the UDOO VISION qualified Power Supply Unit. When not using UDOO VISION qualified Power Supply, use 12VDC

(min 36W power) PSUs certified for your country (make sure that the power cable is less than 3 mt. long).

UDOO VISION qualified PSU: XYY-120300U. Input: 100-240VAC 50/60Hz. Output: 12VDC 3A 48WMax

CE and FCC certifications retained with the board equipped with the UDOO VISION metal case. When not available, it is suggested to use a case with the same

attributes as the UDOO VISION metal Case, sold as an accessory (P/N: KTMC-D02-COV01.00).

1.5Electrostatic discharges

The UDOO VISION board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all

the devices and/or components on-board.

This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered.

This product should be elevated on a stable, flat, electrically non-conductive surface whilst in operation, and clear from any object that

can induce a short-circuit.

Do not expose it to water, moisture or heat from any source; UDOO VISION is designed for reliable operation at normal ambient room

temperatures.

Avoid handling the warm and moving parts (like the fan) and generally the printed circuit board while it is powered

Whenever handling a UDOO VISION board, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static

surface is also highly recommended. During normal work condition of UDOO VISION board, do not touch the product.

VISION

1.6RoHS compliance

The UDOO VISION board is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.

1.7Labels