TYROLIT Hydrostress FSD 1049 Manuel utilisateur

10993834 EN / 28.11.2012

Operating Instructions

Floor Saw FSD1049









Index 001

Page 2 Floor Saw FSD1049

Congratulations!

You have decided to urchase a tried and tested TYROLIT-Hydrostress unit and have thus

acquired a highly so histicated and reliable state-of-the-art unit. The exclusive use of only

TYROLIT Hydrostress s are arts ensures quality and interchangeability. If maintenance work is

neglected or carried out inex ertly we will be unable to honour our warranty obligations. Any

re air work must be carried out by trained ersonnel only.

Should you need more details concerning your TYROLIT Hydrostress unit in order to kee it in

erfect condition, lease contact our after-sales service for further information.

We ho e that you enjoy untroubled and fault-free working with your TYROLIT unit.

TYROLIT Hydrostress

Co yright © TYROLIT Hydrostress

TYROLIT Hydrostress AG

Witzbergstrasse 18

CH-8330 Pfäffikon

Switzerland

Tel. 0041 (0) 44 952 18 18

Fax 0041 (0) 44 952 18 00

TYROLIT Hydrostress AG

Floor Saw FSD1049 Page 3

1Safety

These instructions are just one art of the documentation which is su lied together with the

floor saw. These instructions go together with the "Safety Manual / System Desc

ri tion for Floor

Saws" to form a com lete set of documentation.

DANGER

Failure to com ly with the safety instructions in the "Safety Manual / System Descri tion" may

result in serious injury or death.

►Please ensure that the "Safety Manual / System Descri tion for Floor saws" has been read

and understood in full.

TYROLIT Hydrostress AG

Page 4 Floor Saw FSD1049

2Design

Com onents

1 O erating console

2 Name late

3 Main motor

4 Front cut guide

5 Shaft cover

6 Blade guard

7 Saw blade

8 Rocker wheel

9 Drive wheel

10 Rear cut guide

11 Water feed

2.1 Saw blade drive

Saw blade drive (schematic)

1 Blade drive shaft

2 Drive belt

3 Main motor drive shaft

TYROLIT Hydrostress AG

Floor Saw FSD1049 Page 5

2.2 Lift drive

Lift drive (schematic)

1 Hydraulic cylinder

2. Travel drive

Travel drive (schematic)

1 Drive shaft (main motor)

2 Hydrostat drive belt

3 Hydrostatic motors

4 Wheel drive shaft

5 Drive chain

6 Drive wheel

TYROLIT Hydrostress AG

Page 6 Floor Saw FSD1049

Transport

DANGER

Inexpert transport may result in death or serious injury.

►Floor saws must only be trans orted with the main motor switched off.

►Only trans ort vehicles, lifting tools and load sus ension devices with sufficient load-

bearing ca acity must be used.

►Floor saws must only be hitched by the hitching oints rovided.

►A oint an ex ert marshaller.

►When trans orting by crane do not stand underneath sus ended load.

►Always have the floor saw in your line of vision while it is being trans orted.

.1 Hitching points

Hitching oints

1 Crane hitching device

TYROLIT Hydrostress AG

Floor Saw FSD1049 Page 7

4Initial start-up

4.1 Fitting battery

►Fit battery (for ty e see Technical Data).

TYROLIT Hydrostress AG

Page 8 Floor Saw FSD1049

5Assembly / Set-up

5.1 Mounting grip

►

5.2 Mounting saw blade

1. A ly hand brake

TYROLIT Hydrostress AG

Floor Saw FSD1049 Page 9

DANGER

Parts that fly off (segments, concrete splinters, saw blade, etc.) may cause serious injury

or even death.

►Floor saws must only be o erated with a blade guard.

►When assembling the saw blade on the right-hand side use the anchoring screw with the

left-hand thread.

When assembling the saw blade on the left-hand side, use the anchoring screw with the

right-hand thread.

►Note the direction or rotation arrows on the saw blade.

1 Anchoring screw

*Note the direction of rotation

TYROLIT Hydrostress AG

Page 10 Floor Saw FSD1049

C: To revent the saw blade rotating while being tightened, carefully lace the saw blade on the floor.

5. Mounting saw blade on the other side

5. .1 Disassemble the blade guard

►

Table des matières

Autres manuels TYROLIT Hydrostress Scie

TYROLIT Hydrostress

TYROLIT Hydrostress FSD1274 Series Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress CCE25 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress FSE1022 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE1217 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TTE250 Series Mode d’emploi

TYROLIT Hydrostress

TYROLIT Hydrostress TME700P Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TBE350 Series Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE2226 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WZ Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE2226QC Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TRE250 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress FSG620 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WZ Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HBE 350 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress FSD930 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE811 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HYCON HRS 5806 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress FZ-4S Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress DZ-S2 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HRG500 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TBE400 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HRH500 Series Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HBH534 series Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HBE 400 Manuel utilisateur

Manuels Scie populaires d'autres marques

RIDGID

RIDGID BS1400 Manuel utilisateur

ATIKA

ATIKA BWS 400-2 Manuel utilisateur

RGC

RGC FS20 Manuel utilisateur

Makita

Makita M2300 Manuel utilisateur

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuel utilisateur

IMET Spa

IMET Spa SIRIO 370 AF-E Manuel utilisateur

Optimum

Optimum OPTisaw CS 275 Manuel utilisateur

Makita

Makita BPB180 Manuel utilisateur

Stihl

Stihl MS 462 C-M Manuel utilisateur

AEG

AEG TS 250 K Manuel utilisateur

Meec tools

Meec tools 004665 Manuel utilisateur

Makita

Makita LS1018L Manuel utilisateur

Ryobi

Ryobi RCS1400 Manuel utilisateur

DeWalt

DeWalt DCS391 Manuel utilisateur

Sealey

Sealey SA72 Manuel utilisateur

skilsaw

skilsaw SPT88 Instructions de montage

Urrea

Urrea SI810 Dimensions et guide d'installation

EINHELL

EINHELL BKG 210/1 Manuel utilisateur