TYROLIT Hydrostress WZ Manuel utilisateur

Operating Instructions

Wall saw WZ

Index 006

10988309 EN / 17.05.2010

All manuals and user guides at all-guides.com

all-guides.com

Page 2 Wall saw WZ

TYROLIT Hydrostress AG

Witzbergstrasse 18

CH-8330 Pfäkon

Switzerland

Tel. 0041 (0) 44 952 18 18

Fax 0041 (0) 44 952 18 00

Congratulations!

With a Hydrostress unit from TYROLIT, you have chosen a tried and tested piece of equipment

which has been designed and built to leading technical standards. Only genuine TYROLIT Hy-

drostress replacement parts can guarantee quality and interchangeability. We are unable to ful-

l our warranty obligations if maintenance work is neglected or carried out unprofessionally.

Any repair work must be carried out by trained personnel only.

Our aftersales service is available to help ensure that your TYROLIT Hydrostress units remain in

perfect working order.

We hope that you enjoy untroubled and fault-free working with your TYROLIT unit.

TYROLIT Hydrostress

All manuals and user guides at all-guides.com

TYROLIT Hydrostress AG

Page 3

Wall saw WZ

Safety

These instructions are just one part of the documentation which is supplied together with the

wall saw. These instructions go together with the «Safety Manual / System Description for Wall

Saws» to form a complete set of documentation.

DANGER

Failure to comply with the safety instructions in the «Safety Manual / System Manual» may re-

sult in serious injury or even death.

Please ensure that the «Safety Manual / System Description for Wall Saws» has been read and

understood in full.

DANGER

Cuts from the saw blade.

Always wear protective gloves when working on the wall saw, particularly when working on

the saw blade.

Always use the blade guard when operating the wall saw.

DANGER

Serious injury or material damage as a result of uncontrolled movements of the wall saw.

Never connect or disconnect hoses while the drive unit is running.



All manuals and user guides at all-guides.com

TYROLIT Hydrostress AG

Page 4 Wall saw WZ

Description

Wall saw system

The layout and functions of the wall saw systems are described in the «Safety Manual / System

Description for Wall Saws».

Wall saw

Components

1 Feed motor, travel 7 Feed motor, swivel

2 Water connection 8 Grip / lock unit

3 Saw blade holder 9 Chassis

4 Blade guard holder 10 Water line

5 Name plate 11 Geared swivel arm

6 Blade drive motor 12 Guide roller

Typ

Masch.- Nr.

Gewicht.

Index

Baujahr

CH-8330 Pfäffikon ZH Made in Switzerland

3 4

9101112

Typ

Masch.- Nr.

Gewicht.

Index

Baujahr

CH-8330 Pfäffikon ZH Made in Switzerland

3 4

9101112

2.1

2.2

All manuals and user guides at all-guides.com

TYROLIT Hydrostress AG

Page 5Wall saw WZ

Assembly / disassembly

Place the wall saw on the guide rail

If the grips fail to engage or the wall saw sits too loosely on the guide rail: adjust the guide

rollers.

Adjusting the guide rollers

* The guide rollers must sit in the guide groove, and it must be possible to turn them by hand.



ACB*

3.1

3.2

All manuals and user guides at all-guides.com

TYROLIT Hydrostress AG

Page 6 Wall saw WZ

Mount the drive motor

Mount the saw blade

DANGER

It can cause death or serious injury if the saw blade ies away.

Only use original screws and bolts from TYROLIT Hydrostress AG.

DANGER

Serious injury can be caused by sudden start-up of the saw blade.

Switch o the drive unit before working on the saw blade.

Depressurize the hoses.

Preparations for assembly

During initial installation, remove the ush cut anchoring screws on the quick-release ange.



3.3

3.4

3.4.1

All manuals and user guides at all-guides.com

all-guides.com

TYROLIT Hydrostress AG

Page 7Wall saw WZ

Preassemble the saw blade unit

The direction of rotation of the saw blade must match the direction of rotation of the machine.

Correct alignment: Countersinking of the fastening bores against the blade cover.

For normal cuts with saw blades up to Ø 1000 mm

For normal cuts with saw blades larger than Ø 1000 mm



40 Nm

D2x

40 Nm

B6x

15 Nm

D2x

40 Nm

B6x

15 Nm

3.4.2

All manuals and user guides at all-guides.com

TYROLIT Hydrostress AG

Page 8 Wall saw WZ

For ush cuts

Fastening the saw blade unit

DANGER

It can cause death or serious injury if the saw blade ies away.

Check whether the sleeve and central screw are countersunk.

Tighten the central screw to a torque of 60 Nm.



B6x

15 Nm

B6x

15 Nm

click

60 Nm

click

60 Nm

3.4.3

All manuals and user guides at all-guides.com

TYROLIT Hydrostress AG

Page 9Wall saw WZ

Disassembling saw blade unit

WARNING

Injuries can be caused if the saw blade drops down.

Lift out the saw blade unit to the top when removing it.

Disassemble the saw blade unit in the reverse order to the installation/assembly process.

Mount the blade guard

Mount the blade guard according to the instruction leaet.



3.5

3.6

All manuals and user guides at all-guides.com

TYROLIT Hydrostress AG

Page 10 Wall saw WZ

Connecting the wall saw to the drive unit

The drive unit is isolated from the power supply.

Couplings are clean.

Hoses are undamaged.





3.7

All manuals and user guides at all-guides.com

Autres manuels pour WZ

Table des matières

Autres manuels TYROLIT Hydrostress Scie

TYROLIT Hydrostress

TYROLIT Hydrostress TME700P Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TBE350S-1 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE811 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE811P Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress FSD1274E5 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress FSD1274 Series Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WCE18 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TBE400 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress CSE350D Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress CCE25 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE2226 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE2226 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TRE250 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress FSG620 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HRE410 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress WSE1217 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress SB-E Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HYCON HRS 5806 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress FSD930 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HRH500 Series Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TBE350 Series Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress HRE400 Manuel utilisateur

TYROLIT Hydrostress

TYROLIT Hydrostress TTE250 Series Mode d’emploi

TYROLIT Hydrostress

TYROLIT Hydrostress SK-SD Mode d’emploi

Manuels Scie populaires d'autres marques

RIDGID

RIDGID BS1400 Manuel utilisateur

ATIKA

ATIKA BWS 400-2 Manuel utilisateur

RGC

RGC FS20 Manuel utilisateur

Makita

Makita M2300 Manuel utilisateur

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuel utilisateur

IMET Spa

IMET Spa SIRIO 370 AF-E Manuel utilisateur

Optimum

Optimum OPTisaw CS 275 Manuel utilisateur

Makita

Makita BPB180 Manuel utilisateur

Stihl

Stihl MS 462 C-M Manuel utilisateur

AEG

AEG TS 250 K Manuel utilisateur

Meec tools

Meec tools 004665 Manuel utilisateur

Makita

Makita LS1018L Manuel utilisateur

Ryobi

Ryobi RCS1400 Manuel utilisateur

DeWalt

DeWalt DCS391 Manuel utilisateur

Sealey

Sealey SA72 Manuel utilisateur

skilsaw

skilsaw SPT88 Instructions de montage

Urrea

Urrea SI810 Dimensions et guide d'installation

EINHELL

EINHELL BKG 210/1 Manuel utilisateur