Tyco Electronics Elo TouchSystems 15D1 Manuel utilisateur
2009 Tyco Electronics.
Revision A
P/N E924688
Installing the Fingerprint Reader (FPR)
for the D-Series Touchcomputer
Caution:
Before attaching the fingerprint reader, make sure that the touchcomputer is powered off.
North America
Elo TouchSystem
301 Constitution Drive,
Menlo Park, CA 94025
www.elotouch.com
Europe
Tel +32 (0)16 35 21 00
Fax +32 (0)16 35 21 01
Asia-Pacific
Tel +81 (45) 478-2161
Fax +81 (45) 478-2180
www.tps.co.jp
Latin America
Tel 1-305-428-5210
Fax 1-305-717-4909
www.elotouch.com.ar
Elo Technical Support
:
www.elotouch.com/go/websupport
www.elotouch.com/go/contactsupport
Online self-help
Technical Support contacts in your region:
Turn on the touchcomputer.
11
Replace the front door.
Replace the side door.
10
9
Included Items:
Fingerprint reader module (includes cable with USB Type-A
connector)
Two screws to attach module to chassis
?
?
Note: For the D-Series touchcomputer, the software for the
field-installable peripherals is already pre-installed.
Add two screws to hold
it in place.
Add the fingerprint reader
cover.
Connect the USB cable to
the USB connector.
5
Remove the existing cover
from the front door on the
left side.
8
6
7
1
Insert the fingerprint reader
module into the chassis.
4
Turn off the power to the
touchcomputer.
Remove the front door.
Remove the side door,
as shown.
2
5
3
Autres manuels Tyco Electronics Terminal tactile
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
