TYAN THUNDER GC-HE Manuel utilisateur

http://www.tyan.com

S4520 THUNDER GC-HE

Revision 1.01

reproduced or translated without prior written consent from TYAN Computer Corp.

All registered and unregistered trademarks and company names contained in this manual are

property of their respective owners including, but not limited to the following.

TYAN, Thunder GC-HE S4520 are trademarks of TYAN Computer Corporation.

Adaptec is a trademark of Adaptec Inc.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Intel, Xeon, and combinations thereof are trademarks of Intel Corporation.

Microsoft, Windows are trademarks of Microsoft Corporation.

Phoenix is a trademark of Phoenix Technologies.

QLogic, Zircon, and combinations thereof are trademarks of QLogic Corporation.

ServerWorks, Grand Champion, and combinations thereof are trademarks of ServerWorks, Inc.

Winbond is a trademark of Winbond Electronics Corporation.

Information contained in this document is furnished by TYAN Computer Corporation and has been

reviewed for accuracy and reliability prior to printing. TYAN assumes no liability whatsoever, and

disclaims any express or implied warranty, relating to sale and/or use of TYAN products including

liability or warranties relating to fitness for a particular purpose or merchantability. TYAN retains the

right to make changes to product descriptions and/or specifications at any time, without notice. In

no event will TYAN be held liable for any direct or indirect, incidental or consequential damage,

loss of use, loss of data or other malady resulting from errors or inaccuracies of information

contained in this document.

http://www.tyan.com

Table of Contents

Before you begin…

Chapter 1: Introduction

1.1 Congratulations

1.2 Hardware Specifications

Chapter 2: Board Installation

2.0 Board

2.1 Jumper Definitions

2.2 PCI Hot-Plug

2.3 PCI Setup

2.4 Mounting the Motherboard

2.5 Processors and Frequency Settings

2.6 Installing the Processors/Heatsinks

2.7 Installing the VRMs

2.8 Installing the Memory

2.9 Memory Pair Installation

2.10 Attaching Drive Cables

2.11 Installing Add-In Cards

2.12 Connecting External Devices

2.13 Installing the Power Supply

2.14 Finishing Up

Chapter 3: BIOS Setup

3.0 BIOS Setup Utility

3.1BIOS Menu Bar

3.2 BIOS Legend Bar

3.3 BIOS Main Menu

3.4 BIOS Advanced Menu

3.5 BIOS Security Menu

3.6 BIOS Boot Menu

3.7 BIOS Exit Menu

Chapter 4: Diagnostics

4.1 Beep Codes

4.2 Flash Utility

Glossary

Technical Support

Appendix

.……………………………………………..Page3

.……………………………………………..Page4

.……………………………………………..Page7

.……………………………………………..Page8

.……………………………………….Page 9-13

…..…………………………………..Page 14 -15

..…………………………………………..Page 16

..…………………………………………..Page 17

………………………………………Page 18

..…………………………………….Page 19 -21

..…………………………………………..Page 22

..……………………………………..Page 23-24

..……………………………………..Page 25-26

..……………………………………..Page 27 -28

..…………………………………………..Page 29

..…………………………………………..Page 30

..……………………………………..Page 31-32

..…………………………………………..Page 33

..…………………………………………..Page 34

..…………………………………………..Page 35

..…………………………………………..Page 36

..…………………………………………..Page 37

..…………………………………………..Page 41

..…………………………………………..Page 42

..…………………………………………..Page 43

..……………………………………..Page 44 -48

..…………………………………………..Page 49

..…………………………………………..Page 50

http://www.tyan.com

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1x Thunder GC-HE motherboard

1x Hot-plug switch panel

1x Tyan M3288 SMDC

4x CPU VRMs (Voltage Regulator Module)

4x CPU retentions

2x flat ribbon cables

1x ribbon cable for hot-plug control panel

1x 34-Pin floppy drive cable

1x Ultra160 LVD SCSI cable

1x Ultra-DMA-100/66/33 IDE cable

1x Thunder GC-HE User’s Manual

1x Thunder GC-HE Quick Reference Guide

1x TYAN driver CD

1x Adaptec Ultra160 SCSI driver diskette

1x SMDC and TSO drivers

If any of these items are missing, please contact your vendor/dealer for replacement before

continuing with the installation process.

http://www.tyan.com

Chapter 1: Introduction

1.1 –Congratulations!

Thank you for choosing the TYAN Thunder GC-HE, the ultimate 4-way XEON platform designed

for high-performance, mission critical and data intensive applications. This board is designed to

accommodate the needs of users who require minimal down-town and the most flexibility. Special

features of this board are: PCI-X hot-plug support, dual 10/100 Ethernet ports, dual-channel

Ultra160 SCSI and onboard video.

Remember to visit TYAN’s Website at http://www.tyan.com. There you can find information on all

of TYAN’s products with FAQs, distributors list and BIOS setting explanations.

1.2 –Hardware Specifications

Processor

• Quad mPGA603 ZIF sockets

• Supports up to 4 Intel XEON MP processors

or up to 2 XEON DP processors

• Four VRM 9.1 current share sockets

• Source synchronous bus of 200MHz

• Front-Side Bus support for 400MHz

Chipset

• ServerWorks Grand Champion HE chipset

• ServerWorks CMIC host bridge

• ServerWorks CIOB-X 3.0 I/O bridges (two)

• ServerWorks CSB5 south bridge

• National NS87417 Super I/O ASIC

Memory

• Memory Expansion Card (MEC) design with

twelve 2.5V 184-pin DDR DIMM sockets

• Supports up to 24GB of Registered DDR

RAM

• Multi-bit memory ECC

Expansion Slots

• Seven 64-bit 100MHz (3.3V) PCI-X slots

• Each CIOB-X supports two PCI-X buses with

up to two PCI-X slots on each bus

• One 32-bit 33MHz (5V) PCI slot

• Total of eight usable slots

Integrated SCSI (manufacturing option)

• Adaptec AIC –7899W controller

• Dual Channel Ultra160 SCSI support

• 160MB/sec per channel; 15 LVD devices per

channel

• Channel A and Channel B –68-pin

connectors

Integrated 2D/3D Graphics

• ATI RAGE XL graphics controller

• 4MB frame buffer

• Standard 15-pin analog VGA port

Integrated LAN

• Two Intel 82550 LAN controllers (with TCO)

• 10/100Mbps data transfer rate per controller

• Supports WOR (Wake on Ring) and WOL

(Wake on LAN)

Server Management (daughter card option)

• Tyan Server Management Connector, 50-pin

• QLogic Zircon Baseboard Management

Controller (BMC)

• Supports the Intelligent Platform Management

Interface (IPMI)

• Two I2C private buses, EMP, and fault

resilient booting

BIOS

• Phoenix BIOS on 4Mbit Flash ROM

• Supports APM v1.2 and ACPI v1.0

• User settings for hardware monitoring

• Auto-configuration of IDE hard drive types

• Multiple boot options

• DMI 2.0 compliant, console redirection

Integrated PCI IDE

• Dual Channel master mode

• Supports up to four Enhanced IDE devices

• Support for ATA-100/66/33 IDE and ATAPI

compliant devices

http://www.tyan.com

Integrated I/O

• One floppy connector supports up to two

drives

• Two 9-pin 16550-based serial ports

• One 25-pin SPP/ECP/EPP parallel port

• Two USB 1.1 ports

• PS/2 keyboard and mouse ports

Software Support

Windows NT 4 Server

Windows 2000 family

Windows XP family

RedHat Linux 7.3

TYAN reserves the right to add support or

discontinue support for any OS with or

without notice.

Form Factor

• SSI MEB footprint

(16" x 13", 406.40mm x 330.20mm)

• Compatible with 4U height restriction if rack

mounted

• Application-specific power connector suite;

adapter included for compatibility with EPS12V

power supply

• Stacked parallel (one), serial (two) and VGA

(one) ports

• Side-by-side LAN ports (two)

• Stacked USB ports (two)

• Stacked keyboard and mouse ports

Regulatory

• FCC Class B certified

(Declaration of Conformity)

• European CE certified

(Declaration of Conformity)

http://www.tyan.com

Chapter 2: Board Installation

Installation

You are now ready to install your motherboard. The mounting hole pattern of the Thunder GC-HE

matches the SSI MEB specification. Before continuing with installation, confirm that your chassis

supports a standard SSI MEB motherboard.

How to install our products right….the first time!

The first thing you should do is read this user’s manual. It contains important information that will

make configuration and setup much easier. Here are some precautions you should take when

installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the antistatic bag.

Unplug the power from your computer power supply and then touch a safely grounded

object to release static charge (i.e. power supply case). For the safest conditions, Tyan

recommends wearing a static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the board, or flex the

board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors, memory modules,

and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic bag that the

board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your chassis, as well

as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN DAMAGED

http://www.tyan.com

2.0 –Board

Your board may or may not look exactly like the above diagram due to the loading options.

IMPORTANT NOTE:

Fan locations as labeled on some revisions of the motherboard may be incorrect. It is highly

recommended if you intend to monitor fans, that you use the information in this manual for accuracy. If

you found the addendum in your package you absolutely will need to follow the manual for accurate

location and function of fan headers.

http://www.tyan.com

2.1 –Jumper Definitions

Jumper

Number Description Reference

Page

JP5 Clock Spread Spectrum Enabled/Disabled.

This option should be disabled when using a TYAN FCC tested and

approved chassis. The option to enable has been retained for

alternate chassis use in order to pass FCC testing. Spread

spectrum clocking should be disabled (OFF) whenever possible.

ON = Spread Spectrum enabled

OFF = Spread Spectrum disabled

Default = OFF

(N/A)

JP7 Clock swing Select 1.

Use this setting to adjust the CPU clock swing. This setting can also

be used to during FCC testing. However, any setting other than the

TYAN defaultsshould be extensively tested by a certified technician

prior to use.

Default = OFF

Set for 6x IREF

(N/A)

JP8 Clock swing Select 0.

Use this setting to adjust the CPU clock swing. This setting can also

be used to during FCC testing. However, any setting other than the

TYAN default should be extensively tested by a certified technician

prior to use.

Default = ON

Set for 6X IREF

(N/A)

J25 Front Panel Connector Page 12

J29 SMBUS 3-pin 5V connector (N/A)

JP2000 Onboard SCSI Page 9

JP2003 Onboard ATI RAGE XL Page 9

JP2006 Onboard LAN 1 Page 9

JP2007 Onboard LAN 2 Page 9

JP2009 IPMI 3-pin 5V AUX Power connector (N/A)

JP2010 IPMI 3-pin 5V AUX Power connector (N/A)

JP2011 BMC local bus 4-pin 5V AUX Power connector (N/A)

J3000 Hot plug control cable connector Page 14

JP3004 Hot Plug for PCI-X Bus 1 Page 9

JP3005 Hot Plug for PCI-X Bus 2 Page 10

JP4000 CMOS Reset Page 11

http://www.tyan.com

Jumper Definitions Cont.

Jumper Number Description Reference Page

JP44

* Note. Jumper has

to be set 1-2 at boot

up time for BIOS to

size the memory and

complete POST.

Pin 1-2 Normal position.

South bridge is master on

SMBUS.

Pin 2-3 Debug position.

South bridge slave registers

can be dumped on SMBUS.

(NA)

JP3009 Speaker connector Pin 1 = Speaker + (near mounting hole)

Pin 2 = NC

Pin 3 = NC

Pin 4 = Speaker –( Ground)

JP4002 Optional (additional) front

panel connector when using

the TYAN SMDC baseboard

management controller

BMC. Switches and error

status are controlled directly

by the BMC.

*Pins also require a TYAN

supported IPMI/ SAF-TE

SCSI back plane.

See page 10

Pin 1 = Buzzer stop BTN+

Pin 2 = Buzzer stop BTN-

Pin 3 = System Power led +

Pin 4 = System Power led –

*Pin 5 = Hard drive platter activity led +

*Pin 6 = Hard drive platter activity led –

Pin 7 = Error led +

Pin 8 = Error led –

*Pin 9 = Hard drive error led +

*Pin 10= Hard drive error led –

Pin 11= Fan error led +

Pin 12= Fan error led -

Pin 13= Power supply error led +

Pin 14= Power supply error led -

Pin 15= EXT error led +

Pin 16= EXT error led -

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TYAN Carte mère

TYAN

TYAN Toledo i3210W Manuel utilisateur

TYAN

TYAN Trinity ATX Motherboard Tyan S1598 Manuel utilisateur

TYAN

TYAN TITAN III Manuel utilisateur

TYAN

TYAN THUNDER LE Manuel utilisateur

TYAN

TYAN Tiger MP S2460 Manuel utilisateur

TYAN

TYAN TITAN TURBO ATX-2 Manuel utilisateur

TYAN

TYAN TIGER I7501S Manuel utilisateur

TYAN

TYAN TAHOE-A ATX Manuel utilisateur

TYAN

TYAN S8032 Manuel utilisateur

TYAN

TYAN Thunder K8W S2885 Manuel utilisateur

TYAN

TYAN Triumph i7320 S6621 Manuel utilisateur

TYAN

TYAN THUNDER I7505 Manuel utilisateur

TYAN

TYAN S7012 Manuel utilisateur

TYAN

TYAN S7063 Manuel utilisateur

TYAN

TYAN TOMCAT I875P Manuel utilisateur

TYAN

TYAN THUNDER 2400 Manuel utilisateur

TYAN

TYAN THUNDER K8QW Manuel utilisateur

TYAN

TYAN S5530 Manuel utilisateur

TYAN

TYAN S1668 Manuel utilisateur

TYAN

TYAN THUNDER K8SD PRO Manuel utilisateur

TYAN

TYAN 1.00 Manuel utilisateur

TYAN

TYAN Toledo i965R (S5180AG2N) Manuel utilisateur

TYAN

TYAN S5548 Manuel utilisateur

TYAN

TYAN Tempest i5100W Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur