Turtle Beach Ear Force X-Ray Manuel utilisateur

LIMITED EDITION

User Guide

Congratulations on your purchase of the Call of Duty®: Black OPS II Earforce X-Ray headset

from Turtle Beach. You now have in your possession a premium product that will bring your

gaming experience to a whole new level, heightening your senses, sharpening your reexes and

enhancing your communications. Welcome to excellence!

Table of Contents

Package Contents 4

Feature / Function Map (Location of controls / inputs) 5

Setting Up the Transmitter 8

Using the Transmitter / Pairing Instructions 9

Using your X-Ray Headset on Xbox 360 10

Using your X-Ray Headset on PS3 12

Bluetooth Settings 13

Phone Settings 14

Surround Sound Settings 15

Recharging / Specications 17

Equalizer (EQ) Presets/Blast Limiter Presets 18

Chat Boost™ / Variable Mic Monitor 19

Troubleshooting / Safety Notice 20

Regulatory Compliance 21

Declaration of Conformity 23

Warranty 24

Package Contents

X-Ray Headset

Headset Charging

Cable

Quick Start Guide

X-Ray Transmitter

Digital Optical Cable Xbox 360

Talkback Cable

Turtle Beach Sticker

Quick Start Guide

For the full user guide, please go to http://www.turtlebeach.com/products/X-Ray

Package Contents |Contenu de la boîte

FOR / POUR

XBOX 360

|PS3™

X-Ray Headset

Casque X-Ray

X-Ray Transmitter

Émetteur X-Ray

TurtleBeach Sticker

Vignette TurtleBeach

Digital Optical Cable

Câble optique numérique

Headset Charging Cable

Câble casque Charge

XBOX 360 TalkbackCable

XBOX 360 câble Discussion

Feature / Function Map (Location of controls / inputs)

X-Ray Headset - Left View

1. Power Button: Turn on the headset by pressing the

power button for a couple of seconds, then release.

You will hear 2 beeps and the power LED should start

ashing. Turn off the headset by pressing the button until

the LED stays on and you hear 2 beeps, then release. To

enter Pairing Mode, press and hold the power button for

about 6 seconds until you hear 2 fast beeps and the LED

begins to ash rapidly (see pg 9).

The headset will turn off after several minutes if there’s

no audio detected or if the transmitter is turned off.

Tone Button: Press this button to activate the different

EQ presets. A beep will indicate which preset is selected.

(see pg. 18)

Blast Limiter Button: Press this button to activate the

different Blast Limiter presets. A beep will indicate which

preset is selected. (see pg. 18)

Variable Mic Monitor: Adjusts the level of your voice

heard in the headset. (see pg. 19)

NOTE: Turning up the mic monitor may cause the mic

to pick up room sounds which will make the silence

detector not automatically shut off the headset when it’s

not being used. If the power is not automatically shutting

down, turn down this mic monitor control.

Xbox 360 Controller Jack: Connect the Xbox 360

Talkback Cable from your headset to the controller jack.

Game Volume: Turn to adjust the game sound level.

Removable Microphone with Adjustable Boom:

The microphone can be removed from the headset

when chat is not required by detaching it from the

boom.To properly position the mic: Remove the foam

cover, insert the boom into the socket so the holes on

the mic casing are facing your mouth. Then replace

the foam cover. The boom jack also has a marker to

indicate the proper mic position.

Feature / Function Map (Location of controls / inputs)

X-Ray Headset - Right View

1. Bluetooth®Volume: Press Chat (+) or Chat (–) to adjust

Bluetooth volume level. A tone will sound each time the

volume level changes.

Bluetooth®LED: Flashes blue once per second when

paired with a device. Flashes blue twice per second when

not paired with a device. Flashes blue and red quickly

when in pairing mode.

Bluetooth®Multi-Function Button (BT MFB):

Powers on the Bluetooth and performs several other

functions described in the “Bluetooth” section.

(See page 12)

NOTE: The Bluetooth feature is normally powered on. If it

is not paired to another device, it will automatically turn

off after 5 minutes to conserve battery power.

Mic Mute Button: Press to toggle between muting and

unmuting the microphone. A high beep will sound

when the mic is unmuted and a low beep will sound

when the mic is muted. When using the XBA Bluetooth

Adapter, (Sold Separately) the mic can also be muted by

double-pressing the button on the puck. When using the

Talkback cable, the mic can be muted directly from the

switch on the Talkback cable.

Headset Charging Port: The headset may be charged

by connecting this Mini USB input to a free USB port

on your gaming console using the included Headset

Charging Cable. (See Page 17)

NOTE: The Headset Charging Cable included with the

X-RAY can only be used to charge the headset and cannot

be used as a standard USB data cable.

Charging LED: Turns red when charging and turns off

when charged.

Feature / Function Map (Location of controls / inputs)

X-Ray Transmitter

1234

PAIR SURROUND

ANGLES

SURROUND

ON/ OFF

8 9

5 6

1. Digital Input LED: This LED turns on when a digital input

signal is detected. When this LED is ON, the analog input

is turned off.

Surround Sound LED: The LED will light whenever the

digital input is being processed by the surround sound

decoder. When this LED is off, the audio signal will be

heard in stereo.

Dolby® Digital LED: The LED will light whenever a Dolby

Digital encoded signal is detected on the digital input.

Power/Link LED: When the transmitter is powered on

and communicating with the headset, this LED will be on

solid. When the headset is turned off, the LED will turn off.

A slowly pulsing LED indicates that the transmitter can’t

communicate with the headset. This could happen when

the headset is out of range, turned off or not paired with

the transmitter.

Digital Input and Output: Connect the digital input to the

Xbox 360 digital output using the included digital optical

cable. The digital input is passed through to the digital

output so you can connect the X-RAY transmitter and

your home theater system to hear the Xbox sound on the

headset and speakers at the same time. When a digital

signal is detected by the optical input, the Digital Input LED

will be lit.

Analog Input Jack: Provides a 3.5mm input for digital

music players or additional audio sources. (3.5mm cable

sold separately)

NOTE: The analog input is deactivated whenever a digital

input is active, so both the digital and analog inputs cannot

be used at the same time.

Pair Button: Press and hold to activate pairing mode.

Surround Sound Angles Button: Press to select different

HRTF surround angles. (see pg. 16)

Surround Sound On/Off Button: Pressing this button toggles

between surround sound and stereo sound. When surround

sound is active, the Surround Sound LED will be lit.

DIGITAL OUT

CONSOLE

Digital Optical Cable

(included)

Transmitter USB Cable

Digital Optical Cable

(included)

Xbox 360

Audio Adapter Cable*

(sold separately)

Transmitter USB Cable

Setting Up the Transmitter

Xbox 360 (Slim) and PS3

1. Connect digital optical cable (DIGITAL IN) and

transmitter power cables (included) to game console.

NOTE: Remove the protective caps from each end of

the optical cable before inserting it into the sockets.

2. Connect to power.

Xbox 360 (Older Models)*

1. Connect the Digital Optical Cable(DIGITAL IN)

*(Requires Xbox 360 HDMI Audio Adapter, sold

separately).

2. Connect to power.

Using the Transmitter / Pairing Instructions

Pairing Instructions

The transmitter allows wireless exibility without the restrictions of cables when using your Turtle Beach X-Ray

headset. This wireless communication is through Dual Band WiFi transmitting a signal between the transmitter and your

headset from up to 30 ft. If you are beyond this range or there are obstructions to the signal, you may hear a popping or

clicking sound as the signal weakens and is eventually lost.

For optimal performance, place the transmitter in an open area free from interference from other objects that may

otherwise obstruct the WiFi signal. Avoid placement on a metallic surface such as a home theater A/V receiver as this

may cause interference or a weak signal.

In order for your Turtle Beach X-Ray headset to use the WiFi signal, they need to be “paired” with the transmitter. Follow

the pairing instructions below, keeping the headset and transmitter at least two feet apart while doing so. The headset

and transmitter are pre-paired out of the box. The instructions below are only necessary if pre-pairing appears to have

been lost.*

1. Headset and transmitter should be powered OFF and at least 2 feet away from each other.

2. Connect the transmitter to power (see previous page for instructions)

3. Press and hold the Pairing button on the transmitter for 5 seconds until the LED ashes rapidly. Release.

4. Press and hold Power button (approximately 6 seconds) on the headset until the LED ashes rapidly. Release.

5. Once your Turtle Beach X-Ray headset has been successfully paired, the Headset LED will blink once per second and

the transmitter Power LED will light solid.

PAIR SURROUND

ANGLES

SURROUND

ON/ OFF

*The pairing process can take up to 30 seconds to complete. If pairing is unsuccessful on

rst attempt, please try again. It may take as many as ve attempts to pair successfully.

Using your X-Ray Headset on Xbox 360

Your Turtle Beach X-Ray headset is designed to work with Xbox 360 game consoles. In order to get ideal functionality

from your headset, follow the directions below.

2. Go back to Xbox Settings

3. Power X-Ray ON:

- Choose “Preferences.”

- Choose “Voice.”

- Under “Voice Output,” choose “Play Through Headset.”

1. Go to Xbox Settings.

- Choose “Settings”

- Choose “System Settings”

- Choose “Console Settings”

- Choose “Audio”

- Choose “Accessory Settings”

- Choose “Audio Device Settings”

- Set “Digital Output” to “Dolby Digital 5.1.”

Select Back

Digital Output

Current Setting

Dolby Digital

Choose the digital output

type for your system.

This setting only applies

to optical digital and HDMI

audio outputs.

Digital Stereo

Dolby Digital 5.1

Dolby Digital 5.1 with WMAPro

Voice Volume 10

Voice

Mute Kinect

Voice Output

Play Through Headset

Play Through Speakers

Play Through Both

Game Volume 10

Autres manuels pour Ear Force X-Ray

Table des matières

Autres manuels Turtle Beach Casque audio

Turtle Beach

Turtle Beach Ear Force i60 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force Foxtrot Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force X41 Manuel utilisateur

Turtle Beach

Turtle Beach Earforce PX4 Manuel utilisateur

Turtle Beach

Turtle Beach EAR FORCE X3 Manuel utilisateur

Turtle Beach

Turtle Beach ear force w3 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force HPA2 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force X3 Manuel utilisateur

Turtle Beach

Turtle Beach EarForce XP500 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force MARVEL SEVEN Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force X41 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force XLa Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force PLa Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force X42 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force PX1 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force PX3 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force X4 Manuel

Turtle Beach

Turtle Beach EarForce PX22 Manuel utilisateur

Turtle Beach

Turtle Beach Tango Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force X1 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force AK-R8 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force X32 Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force XP SEVEN Manuel utilisateur

Turtle Beach

Turtle Beach Ear Force X-52 Manuel utilisateur

Manuels Casque audio populaires d'autres marques

Sony

Sony MDR-NC8 Manuel utilisateur

AUSounds

AUSounds AU-Stream Manuel utilisateur

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuel utilisateur

Philips

Philips SHE3622 Manuel utilisateur

Insignia

Insignia NS-CAHBTSPORT Manuel utilisateur

Movie Vision

Movie Vision HP-400 Manuel utilisateur

MobiFren

MobiFren SM Pro Manuel utilisateur

Motorola solutions

Motorola solutions PMLN8120 Manuel utilisateur

Jaybird

Jaybird freedom Guide d'installation

Sony

Sony MDR-ED12LP Manuel utilisateur

HiFuture

HiFuture Tidy Buds Pro Manuel utilisateur

Creative

Creative CB2530 Manuel utilisateur

Renkforce

Renkforce RF FTVK-100 Manuel utilisateur

Philips

Philips SHQ3000 Manuel utilisateur

Sennheiser

Sennheiser 500371 Manuel utilisateur

Califone

Califone 2924AV Manuel utilisateur

Philips

Philips EARGEAR HE205 Series Manuel utilisateur

Technics

Technics EAH-AZ80 Manuel utilisateur