TScale ROW Precision Balance Series Manuel utilisateur
ROW
Precision Balance
V1.20-V1.10
REV:YM1,OCT 2016
ROW Precision Balance Technical Manual
- 2 -
CONTENTS
1. SPECIFICATIONS….………………………………………………….……......4
2. INTRODUCTION………………………………………………………………...5
3. INSTALATION …………………………………………………………………..6
Unpacking…………………………………………………………………..6
Installation…………………………………………………………………..6
Load cell connections..………………………………………………...7
Connect Adaptor and Charging..………………………………………...7
4. DESCRIPTION……………...........……………………………………………...8
Display……………………………………………………………………....8
Key board……………………………………………………………..…….9
5. OPERATION.…………………….………………………………….………….10
5.1. Power ON/OFF……………………………………………..………..10
5.2. Zero…………………….................................................................10
5.3.Tare................................................................10
5.4. Sample Weighing………………………………………….………….10
5.5. Check Weighing…………………………………………….…………11
5.6. Enter to Menu………………………………….…………………….11
5.7. Set Limits…………………..............................................................11
5.8. Set check weighing mode..............................................................11
5.9. Accumulation……………………………………….………………….12
5.10. Accumulation automatically……………………..………………...13
5.11. Animal Weighing…………………………………………………...14
5.12. Backlight Setting…………………………………………………15
5.13. Auto Power Off Setting……………………………………………15
5.14. Peak Hold……………………………………………………………15
5.15. Subtraction scale…………………………………………………16
6. PARAMETER…………………………………………….…………………….17
Keys operation into menu…………………………………………….. .17
Parameter Block………………………………………………………....19
7. CALIBRATION…………………………………………………………………20
8. RS232 OUT PUT………………………………………………………………23
9. DRAWING…………………………………………………………..……………26
10. ERROR CODES…………………………………………………………..……28
ROW Precision Balance Technical Manual
- 3 -
1. SPECIFICATIONS
Overall View
keyboard
pan
Dimensions
RS-232
Adaptor Jack
Adjustable foot
ROW Precision Balance Technical Manual
- 4 -
Model
ROW
Resolution
1/30,000; 1/70,000; 1/150,000
housing
ABS Plastic indicator+ SST pan
Capacity
3kg/7kg/15kg
Stabilisation Time
1 Seconds typical
Operating Temperature
0°C ~ +40°C / 32°F - 104°F
Power supply (external)
AC Adaptor (12V/500mA) /
Ni-MH battery (1.2V/2000mAh x 6)
Calibration
Automatic External
Display
6 digits 22mm LCD display, attached backlight
Gross weight
3.8kg
Interface
RS-232 Output Optional
Zero range
0mV~5mV
Signal input range
0~15mV
ADC
Sigma delta
ADC update
Max 60 times /second
Load cell drive voltage
Max 5V/150mA
ROW Precision Balance Technical Manual
- 5 -
2. INTRODUCTION
The ROW series precision balance that amplifies signals from a load cell,
converts it to digital data and displays it as a mass value.
It is suitable for general weighing or more specialized applications such as
check weighing, animal weighing and accumulation applications.
It can connect the indicator to a printer or a PC.
Large LCD with white LED back light display
ROW Precision Balance Technical Manual
- 6 -
3. INSTALLATION
Unpacking
When you receive the balance, inspect it to make sure that it is not damaged and
that all are parts are included:
Remove the Indicator from the carton.
Remove the protective covering. Store the packaging and to use if you
need to transport the scale later.
Inspect the indicator for damage.
Make sure all components are included.
1. Balance
2. Adaptor
3. Manual
Installation
Place the balance on a table or connect with proper stand.
Connect the plat form load cell cable in to the indicator load cell connecter.
Load cell connecter is locating back side of the balance.
Connect the adaptor pin in to the indicator adaptor jack.
Adaptor jack is locating, back side of the balance.
Adaptor connects into your AC power socket.
Pluggable equipment must be installed near an easily accessible socket
outlet with a protective ground/ earth contact.
Turn on the On/Off key. If you want to turn off, press the key again.
Display will be show the scale capacity and will be starting self-checking.
After self-checking, display will be come to normal weighing mode.
Warm-up time of 15 minutes stabilizes the measured values after
switching on.
Calibrate with exact calibration weights, minimum 1/3 of the scale capacity
want to use for calibration. For calibration see details in parameter.
Then you can start your operation
ROW Precision Balance Technical Manual
- 7 -
Connect Adaptor and Charging
To charge the battery insert the adaptor pin to jack. Adaptor simply plug into
the mains power. The scale no needs to be turned on.
The battery should be charged 12 hours for full capacity.
The symbol status of the battery
Battery voltage has dropped
Low voltage
Fully charged
.
Do not use any other type of power adaptor than the one supplied with the
scale.
Verify that the AC power socket outlet is properly protected.
Note: Please charge the battery before using the scale for the first time.
ROW Precision Balance Technical Manual
- 8 -
4. DESCRIPTION
Display
DISPLAY
FUNCTION
HI
OK
LOW
Check weighing
ZERO
Indicator for Zero display
TARE
Indicator for Tare display
GROSS
Indicator for Gross weight
NET
Indicator for Net weight
STABLE
Indicator for Display stability
AUTO
Indicator for Auto Accumulation
M+
Indicator for Accumulation
ANIMAL
Indicator for Animal Weighing Mode
HOLD
Indicator for Hold/ Lock
Indicator for Charging status of battery.
FROUNT
BACK
FROUNT
BACK
ROW Precision Balance Technical Manual
- 9 -
Key Board
KEY
FUNCTION
Turn the power On/ Off
Used to reset to Zero. In setting mode can use to confirm entry
Used to recording tare values and change the value from gross
value to net value.
Insetting mode can use to increase the value and scroll
forward in menu.
When the scale has been tared and display is in gross or net
mode.
When using the settings mode, can use to move active digits
right.
For print the results, to the PC or printer using the optional RS-
232 interface.
It also adds the value to the accumulation memory if the
accumulation function is not automatic.
When using the settings mode,can use to clear active digits
Switch to unit weight. In setting mode,
escape back to menu/ weighing mode.
When using the settings mode, can use to move active digits
left.
ROW Precision Balance Technical Manual
- 10 -
5. OPERATION
Initial Start – Up:
Warm-up time of 15 minutes stabilizes the measured values after switching on.
5.1. Power ON/OFF:
Switch on the balance by pressing key.
The display is switched on and the test is started and if want to switched
off, press again the key.
5.2. Zero
Environmental conditions can lead to the balance exactly zero in spite of
the platform not taking any strain. However, you can set the display of
your balance to zero any time by pressing key and therefore ensure
that the weighing starts at zero.
5.3. Tare
The weight of any container can be tared by pressing button so that
with subsequent weighing the net weight of the object being weighed is
always displayed.
Load weight on the platform.
Press key. Zero is displayed, and tare is subtracted.
Remove weight on the platform. Tared weight is displayed. It can set only
one tare value. It can display with a minus value.
Press G/N to change between gross weight and net weight.
To clear the tare value, remove the load and press key. Zero is
displayed, tare weight is cleared.
5.4. Sample weighing
Place goods to be weighed on the platform.
Wait few seconds for stability display.
Read the result.
Avoid overloading. When display appears “ol” reduce the load or
unload.
5.5. Check Weighing
Table des matières
Autres manuels TScale Échelle
TScale
TScale T-Touch VX7-11 Manuel utilisateur
TScale
TScale M503 Series Manuel utilisateur
TScale
TScale JWP Manuel d'installation
TScale
TScale IP30 Manuel utilisateur
TScale
TScale ATW Series Manuel utilisateur
TScale
TScale ATP Manuel utilisateur
TScale
TScale M301 Manuel utilisateur
TScale
TScale bw series Manuel utilisateur
TScale
TScale ATP-6 Manuel utilisateur
TScale
TScale DR Series Guide de démarrage rapide
TScale
TScale AW20 Manuel utilisateur
TScale
TScale QHW 15 Manuel utilisateur
TScale
TScale M501 Manuel utilisateur
TScale
TScale M503 Series Manuel utilisateur
TScale
TScale M 701 series Manuel utilisateur
TScale
TScale T-Touch P18 Manuel utilisateur
TScale
TScale IHB++ -300 Manuel utilisateur
TScale
TScale ROW Series Manuel utilisateur
TScale
TScale TFB sereis Manuel utilisateur
TScale
TScale ATW series Manuel utilisateur
