1. Safety
1.1 Important notes
■This is a product for commercial and industrial use in the
"second environment". This is the environment to which all
commercial, light manufacturing and industrial enterprises
belong, with the exception of those that are connected
directly to the low-voltage network for the supply of buildings
for residential use.
To prevent disturbances, restrictions regarding the installa-
tion or additional measures may be necessary.
■The products listed in the declaration of conformity are not
independently operating products in the sense of the EMC
directive. The EMC situation cannot be evaluated until the
product has been incorporated in a complete system. The
evaluation was verified for a typical system configuration, but
not for the individual product.
■All technical safety requirements in the product-specific docu-
mentation (operating instructions, manual, etc.) must be
adhered to throughout the entire product lifecycle.
1.2 Storing the operating instructions
IMPORTANT SAFETY INSTRUCTIONS
ØSAVE THESE INSTRUCTIONS.
These operating instructions contain safety notices that must be
observed during installation and maintenance. Therefore, keep
the operating instructions in a safe place for the entire life cycle
of the device.
Include the operating instructions if you sell the device or set it
up at another location.
1.3 Warning signs
Certain activities can cause danger during operation. Corre-
sponding warning signs concerning the dangers should precede
instructions concerning the activities. Danger signs are located
on the device.
A warning sign contains signal words which are explained in the
following table:
4Safety 2022-06-22 A67-0147-00.BKen-0
01-01
CAUTION
