07
TrueForm Trainer
07
12
Place the top handrail onto the handrail
sides and hold in place. Insert the rear bolts
rst using the Allen wrench to secure. Next,
insert and secure the front bolts.
INSTALL TOP HANDRAIL
11
Connect the display connector from the
right side handrail to the connector pro-
truding from the right side of the top hand-
rail. Tuck in the excess wire. Be sure not to
pinch the wires.
10
With the longer side facing the front, insert
the left handrail into the Trainer base until
fully seated. You may need to slightly
wiggle the handrail side to side to fully
insert.
INSTALLING LEFT HANDRAIL
09
Carefully pull excess wire through the top
of the handrail and insert the handrail into
Trainer base. The longer side should face
the front. You may need to slightly wiggle
the handrail to fully insert.
INSTALLING RIGHT HANDRAIL
08
Connect the black connector at the base of the
Trainer to the black connector at the bottom of
the handrail and feed any excess wire up the
handrail.
The right handrail contains the display
cable. The white connector is at the top and
the black connector at the bottom. If the
cable falls out of the handrail, feed the wire
back through the handrail top to bottom.
CONNECTING RIGHT HANDRAILCONNECT RIGHT HANDRAIL
Assembly
