Tripp Lite B155-002-DP-V2 Manuel utilisateur
1
Owner’s Manual
DisplayPort / Mini DisplayPort
v1.2 Multi-Stream
Transport Hubs
Models: (DisplayPort Out) B155-002-DP-V2,
B155-003-DP-V2, B155-004-DP-V2,
B156-002-V2, B156-003-V2, B156-004-V2
(DVI Out) B155-002-DVI-V2, B156-002-DVI-V2
(HDMI Out) B155-002-HD-V2, B155-003-HD-V2,
B155-004-HD-V2, B156-002-HD-V2,
B156-003-HD-V2, B156-004-HD-V2
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate
peace of mind. You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
16-02-394-93-35A3-EN.indd 1 3/2/2016 2:39:34 PM
2
Product Features
• Connect multiple monitors via the DisplayPort
or Mini DisplayPort output on your computer to
display the same image on each monitor, extend
the desktop across monitors, or combine as one
enlarged monitor in video wall mode.*
• DisplayPort v1.2 and Multi-Stream Transfer (MST)
compliant.*
• Built-in cable connects directly to a DisplayPort or
Mini DisplayPort source.
• DisplayPort and HDMI output models support
4K
x 2K Ultra High Definition (UHD)
resolutions up
to 3840 x 2160 (24 and 30 Hz) – see System
Requirements for more information.
• DVI output models support video resolutions up to
1920 x 1080 (60Hz) – see System Requirements
for more information.
• 2-port models are powered via USB Micro-B—
no external power supplies required.
•
Supports up to 48-bit Deep Color (16 bits per channel).
• Supports DTS-HD, Dolby True HD and 7.1 channel
surround sound audio.
• Supports HDCP, EDID and DDC.
• Compliant with the Federal Trade Agreements Act
(TAA) for GSA Schedule purchases.
* Backward compatible with most DisplayPort 1.1a equipment
running current graphics drivers. The feature set is limited
to the attached equipment’s capabilities (e.g. you may
be limited to displaying in Clone / Mirror mode only).
Compatibility with older graphics cards is not guaranteed.
16-02-394-93-35A3-EN.indd 2 3/2/2016 2:39:34 PM
3
System Requirements
• A computer with a DisplayPort v1.2 compatible
Graphics Card (e.g. AMD Radeon with AMD
Eyefinity Technology). Backward compatible with
most DisplayPort 1.1a equipment running current
graphics drivers. The feature set is limited to
that of the attached equipment (e.g. you may be
limited to displaying in Clone / Mirror mode only).
Compatibility with older graphics cards is not
guaranteed.
• Mac OS X does not support MST for NVIDIA and
Intel Graphics Processor Units, limiting video display
on the connected monitors to mirror mode.
• DisplayPort 1.2 bandwidth is 21.6 Gbps. Higher
resolution monitors take up more bandwidth.
Although DisplayPort and HDMI monitors support
video resolutions up to 3840 x 2160 on individual
monitors, the number of 4K monitors connected
at the same time is limited. For example, when
connecting four monitors simultaneously, you will
be limited to connecting 1080p monitors. Higher
resolutions are possible when displaying in video
wall mode (e.g. 3840 x 2160 in 2X2 video wall,
7680 x 1080 in a 4X1 video wall, and so on.)
16-02-394-93-35A3-EN.indd 3 3/2/2016 2:39:34 PM
4
Notes:
• Prior to installation, ensure your graphics driver is up-to-date
by installing the latest driver available. The MST hub is
backward compatible with most DisplayPort 1.1a equipment
running current graphics drivers. Feature set is limited to the
attached equipment’s capabilities (e.g. you may be limited
to displaying in Clone / Mirror mode only). Compatibility with
older graphics cards is not guaranteed.
• Make sure the power to all connected devices is turned off
prior to installation.
1. Connect the hub’s built-in cable to the computer’s
DisplayPort or Mini DisplayPort output.
Installation
Optional Accessories
Package Contents
• P561-Series DVI-D Single-Link Cables
• P568-Series High Speed HDMI Cables
• P580-Series DisplayPort Cables
• DisplayPort or Mini DisplayPort MST Hub
o 2-Port Models: USB Micro-B Cable – 3 ft.
o 3- and 4-Port Models: External Power Supply
(Input: 100-240V, 50/60Hz, 0.5A Output: 5V 2A)
• Owner’s Manual
16-02-394-93-35A3-EN.indd 4 3/2/2016 2:39:34 PM
5
Installation
2. (2-Port Models) – Connect the included USB
Micro-B cable between the hub and a USB port
on the computer or USB charger. The green Power
LED will illuminate.
3. (3- and 4-Port Models) – Connect the included
external power supply to the hub and plug it into
a Tripp Lite Surge Protector, Uninterruptible Power
Supply (UPS) or Power Distribution Unit (PDU). The
green Power LED will illuminate.
4. Connect a monitor to an available output port on
the hub.
Note: The maximum distance between the hub and the
connected monitor must not exceed 15 ft. (4.6 m).
5. Repeat step 4 for each additional monitor you are
connecting.
6. Turn on the power to the connected monitors, then
power on the source. The orange port LEDs will
illuminate to indicate a signal is being received and
video will appear on the connected monitors.
7. Use your video card’s display settings screen to
adjust how video is displayed on the connected
monitors.
16-02-394-93-35A3-EN.indd 5 3/2/2016 2:39:34 PM
6
Troubleshooting
If you are unable to get an acceptable image
after following the installation instructions, try the
troubleshooting tips below.
1. Is your equipment running the latest graphics
driver? If not, download the latest graphics drivers
for your equipment. The MST hub is backward
compatible with most DisplayPort 1.1a equipment
running current graphics drivers. The feature set
is limited to the attached equipment’s capabilities
(e.g. you may be limited to displaying in Clone /
Mirror mode only). Compatibility with older graphics
cards is not guaranteed.
2. Press the hub’s reset button to reset the
signal being sent to the connected displays.
3. Is the included USB Micro-B cable (2-Port
models) or external power supply (3- and
4-Port models) connected and plugged into
a working power source? For the product to
function properly, it must be connected to and
receiving power from the USB Micro-B cable or
external power supply.
4. Was the power to the DisplayPort source
and connected monitors turned off prior to
installation? If not, restart your computer.
16-02-394-93-35A3-EN.indd 6 3/2/2016 2:39:34 PM
7
Troubleshooting
5. What resolution are you trying to attain on
each monitor? DisplayPort 1.2 has a bandwidth
of 21.6 Gbps, with higher resolution monitors
taking up more bandwidth. Although DisplayPort
and HDMI monitors support video resolutions
up to 3840 x 2160 on individual monitors, the
number of 4K monitors connected at the same
time is limited. For example, when connecting four
monitors simultaneously, you will be limited to
connecting 1080p monitors with higher resolutions
possible when displaying in video wall mode (e.g.
3840 x 2160 in 2X2 video wall, 7680 x 1080 in a
4X1 video wall, and so on).
6. What cable lengths are you using? The
maximum cable length between the hub and the
connected monitors should not exceed 15 ft.
(4.6 m).
7. What type of cabling are you using? Inferior
cabling can result in poor performance. It
is important to use cables that support the
video resolution you are trying to attain. It is
recommended you use the Tripp Lite cables listed
in the Optional Accessories section, as they have
been tested to work with the MST Hubs.
8. Test your cables to ensure they are working
properly. For example, connect your DisplayPort
cables between a source and monitor setup you
know works to determine if the cable is functioning
properly.
16-02-394-93-35A3-EN.indd 7 3/2/2016 2:39:34 PM
8
Warranty and Product Registration
1-YEAR LIMITED WARRANTY
TRIPP LITE warrants its products to be free from defects in materials
and workmanship for a period of one (1) year from the date of initial
purchase. TRIPP LITE’s obligation under this warranty is limited
to repairing or replacing (at its sole option) any such defective
products. To obtain service under this warranty, you must obtain a
Returned Material Authorization (RMA) number from TRIPP LITE or
an authorized TRIPP LITE service center. Products must be returned
to TRIPP LITE or an authorized TRIPP LITE service center with
transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place
of purchase. This warranty does not apply to equipment, which has
been damaged by accident, negligence or misapplication or has
been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may
not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE
BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as
lost profits or revenue, loss of equipment, loss of use of equipment,
loss of software, loss of data, costs of substitutes, claims by third
parties, or otherwise.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new
Tripp Lite product. You’ll be automatically entered into a drawing for a
chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions
apply. See website for details.
16-02-394-93-35A3-EN.indd 8 3/2/2016 2:39:34 PM
9
Warranty and Product Registration
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly
approved by Tripp Lite could void the user’s authority to operate this
equipment.
Tripp Lite has a policy of continuous improvement. Specifications are
subject to change without notice.
16-02-394-93-35A3-EN.indd 9 3/2/2016 2:39:34 PM
10
Notes
16-02-394-93-35A3-EN.indd 10 3/2/2016 2:39:34 PM
Ce manuel convient aux modèles suivants
13
Table des matières
Autres manuels Tripp Lite Changer
Tripp Lite
Tripp Lite NetCommander B072-016-1-IP Manuel utilisateur
Tripp Lite
Tripp Lite U225-004-R Manuel utilisateur
Tripp Lite
Tripp Lite AG-014D Series Manuel utilisateur
Tripp Lite
Tripp Lite B022-U16-IP Manuel utilisateur
Tripp Lite
Tripp Lite B004-DUA2-K-R Instructions d'installation et d'utilisation
Tripp Lite
Tripp Lite B004-2DUA2-K Manuel utilisateur
Tripp Lite
Tripp Lite NetCommander B070-008-19 Manuel utilisateur
Tripp Lite
Tripp Lite PDUMH15NET2 Manuel utilisateur
Tripp Lite
Tripp Lite B119-002-UHD Manuel utilisateur
Tripp Lite
Tripp Lite U460-002-2AM-C Manuel utilisateur
Tripp Lite
Tripp Lite B024-DUA8-SL Manuel utilisateur
Tripp Lite
Tripp Lite 0DT60001 Manuel utilisateur
Tripp Lite
Tripp Lite U360-010-IND Manuel utilisateur
Tripp Lite
Tripp Lite U460-4A3C-IND Manuel utilisateur
Tripp Lite
Tripp Lite NetCommander B072-016-1-IP Manuel utilisateur
Tripp Lite
Tripp Lite B022-002-KT-R Manuel utilisateur
Tripp Lite
Tripp Lite NetDirector B064-016-02-IP Manuel utilisateur
Tripp Lite
Tripp Lite B051-000 IP Manuel utilisateur
Tripp Lite
Tripp Lite Minicom Smart 116 0SU22082 Manuel utilisateur
Tripp Lite
Tripp Lite NSS-G16D2 Manuel utilisateur
