Tripp Lite B119-003-UHD Manuel utilisateur

Owner’s Manual

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

3-Port HDMI Switch with

Remote Control, 4K x 2K

Model: B119-003-UHD

Este manual esta disponible en español en la página de Tripp Lite:

www.tripplite.com/support

Ce manuel est disponible en français sur le site Web de Tripp Lite :

www.tripplite.com/support

Русскоязычная версия настоящего руководства представлена на

веб-сайте компании Tripp Lite по адресу: www.tripplite.com/support

18-01-070-933768-EN.indd 1 2/6/2018 3:53:02 PM

Package Contents

Optional Accessories

System Requirements

• B119-003-UHD

• Remote Control

• External Power Supply (Input: 100–240V, 50/60 Hz, 0.2A; Output: 5V 1A)

•

(4) International Plug Adapters (North America, Europe, U.K. and Australia)

• Mounting Hardware

• Owner’s Manual

• P569-XXX-CERT Premium High-Speed HDMI with Ethernet Cables

• P520-006 RS-232 Serial Extension Cable

• Source device(s) with HDMI outputs

• Display device with HDMI input

18-01-070-933768-EN.indd 2 2/6/2018 3:53:02 PM

Product Features

• Switch between three HDMI source devices (Blu-ray™ player, cable box,

PC, etc.) connected to a single display

• Switch devices via push button, RS-232 port control or the included

remote control

• Supports Ultra High Deﬁnition (UHD) video resolutions up to 4096 x 2160

(4K x 2K) @ 60 Hz

• Supports up to 36-bit Deep Color (12 bits per channel)

• Supports standard, DSD (Direct Stream Digital) and HD (HBR) audio

• Supports 7.1-channel surround sound, DTS-HD™ and Dolby®TrueHD

audio

• Supports 300 MHz/3.4 Gbps per channel bandwidth (10.2 Gbps total)

• Meets HDCP 2.2 and HDMI 2.0 standards

• Supports 3D and EDID

• Plug-and-play operation with no software or drivers required

18-01-070-933768-EN.indd 3 2/6/2018 3:53:02 PM

Connection

1Optional: Attach the included mounting hardware to the unit, and

mount to a desired location.

2Make sure power to all devices that you will be connecting is turned off.

Optional: Connect a DB9 cable between the RS-232 serial port on the unit

and the DB9 serial port on the computer you will be using to control it.

4Connect an HDMI source device to an HDMI Input port on the switch.

Note: The length of the HDMI cable connecting the source to the switch must not

exceed 16 ft. (5 m).

5Repeat step 3 to connect up to two more source devices to the

remaining Input ports on the switch.

6Connect the HDMI Output port on the switch to the HDMI input port of

your display.

Note: The length of the HDMI cable connecting the switch to the display must not

exceed 16 ft. (5 m).

7Connect the external power supply to the switch. Plug it into a Tripp Lite

surge protector, uninterruptible power supply (UPS) or power distribution

unit (PDU). The red LED on the unit will illuminate to indicate power is

being received.

Standard Installation

DVD

HDMI Switch

Display

18-01-070-933768-EN.indd 4 2/6/2018 3:53:03 PM

Standard Installation

8Turn on the power to the HDMI source devices and display. The blue

LEDs on the unit will illuminate to indicate the signal is being received.

9Switch between source devices using the Select push button on the

unit, RS-232 serial control or the included remote control.

See the RS-232 Serial Control section in this manual for details on

controlling the switch using Terminal Emulation Software.

RS-232 Serial Control

Before using RS-232 Serial Control, you must ﬁrst go into your Terminal

Emulation Software and update the COM port settings.

1Go to the Setup dropdown menu, and select the Serial Port Option.

18-01-070-933768-EN.indd 5 2/6/2018 3:53:03 PM

Standard Installation

2Select the COM port that is being used, and update the remaining

settings as follows:

Baud Rate (9600)

Data (8 bit)

Parity (none)

Stop (1 bit)

Flow Control (Xon/Xoff)

18-01-070-933768-EN.indd 6 2/6/2018 3:53:04 PM

Standard Installation

3Next, you will need to conﬁgure your software to allow input control. Go

to the Setup dropdown menu, and select the Terminal option.

18-01-070-933768-EN.indd 7 2/6/2018 3:53:04 PM

Standard Installation

4Update the following settings:

Receive (AUTO)

Local Echo (enable)

The remaining settings can stay as they are.

5Once these settings are updated, the Terminal Emulation Software will

recognize the switch, allowing you to enter commands to control it. The

following table lists the available commands. Please note that hitting the

backspace key will revise a command.

Action Command

HDMI 1 Input port0R

HDMI 2 Input port1R

HDMI 3 Input port2R

Power On poweronR

Power Off poweroffR

18-01-070-933768-EN.indd 8 2/6/2018 3:53:04 PM

Troubleshooting

If you are unable to get an acceptable image after following the installation

instructions, try the troubleshooting tips:

1. Is the external power supply that came with the product connected

and plugged into a working power source? For the product to function

properly, the switch must be connected to and receiving power from an

external power supply.

2. Was the power to the connected devices turned off prior to

installation? If not, restart them.

3. What resolution are you trying to reach? The B119-003-UHD is

tested to support Ultra High Deﬁnition (UHD) video resolutions up to

4096 x 2160 @ 60 Hz and 36-bit Deep Color (12 bits per channel).

What length HDMI cable are you using? The shorter the cable being

used, the higher the resolution you will be able to obtain. If you are not

able to get an acceptable image, try using a shorter cable or lowering your

source’s video resolution or color depth settings. See the Installation

section in this manual for details on the maximum cable distance.

5. What type of cabling are you using? Inferior cabling can result in poor

performance, so it is important you use cables that can support the video

resolution you are trying to obtain. It is recommended that you use

Tripp Lite’s P569-XXX-CERT Premium High-Speed HDMI with Ethernet

cables, as they have been tested to work with the B119-003-UHD.

6. Test your cables to ensure they are working properly. For example,

connect your HDMI cable between a source and monitor that you know

work to see if the cable is functioning.

7. Is the unit located in an area that exposes it to higher

temperatures? If the product is overheated, it will not function properly.

8. If you are having trouble getting your Terminal Emulation Software to

recognize the switch, you may need to shut down your installation and

start from the beginning.

If you are still having trouble getting your Terminal Emulation Software to

recognize the switch, check to make sure your serial settings are set according

to the instructions in the RS-232 Serial Control section of this manual

18-01-070-933768-EN.indd 9 2/6/2018 3:53:04 PM

Speciﬁcations

Connectors

Input (3x) HDMI (Female)

Output HDMI (Female), DB9 (Female)

Video

Maximum Resolution 4096 x 2160 @ 60 Hz

Color Depth 36-bit Deep Color (12 bits per channel)

Video Ampliﬁer Bandwidth 10.2 Gbps / 300 MHz

Environmental

Operating Temperature 32° to 140°F (0° to 60°C)

Storage Temperature -4° to 158°F (-20° to 70°C)

Relative Humidity 0% to 95%, Non-Condensing

Physical

Unit Dimensions (H x W x D) 0.8 x 6.3 x 2.0 in. (20 x 160 x 51 mm)

Unit Weight 0.54 lb. (240 g)

Power Requirements

External Power Supply 5V 1A

Power Consumption (Max) 5W

18-01-070-933768-EN.indd 10 2/6/2018 3:53:04 PM

Table des matières

Autres manuels Tripp Lite Changer

Tripp Lite

Tripp Lite U280-016-RM Manuel utilisateur

Tripp Lite

Tripp Lite NFI-U05 Manuel utilisateur

Tripp Lite

Tripp Lite C205-004-U-R Manuel utilisateur

Tripp Lite

Tripp Lite B170-002-R Manuel utilisateur

Tripp Lite

Tripp Lite NetCommander AG-00C3 Series Manuel utilisateur

Tripp Lite

Tripp Lite U460-ST4-4A-C Manuel utilisateur

Tripp Lite

Tripp Lite NetCommander B072-016-1-IP Manuel utilisateur

Tripp Lite

Tripp Lite B170-004-R Manuel utilisateur

Tripp Lite

Tripp Lite NGI-U08C2 Manuel utilisateur

Tripp Lite

Tripp Lite B006-004-R Manuel utilisateur

Tripp Lite

Tripp Lite NerDirector B020-U08-19KTAA Manuel utilisateur

Tripp Lite

Tripp Lite Ultra-Mini U202-004-R Manuel utilisateur

Tripp Lite

Tripp Lite AG-01FD Series Manuel utilisateur

Tripp Lite

Tripp Lite NetDirector B022-U08-IP Manuel utilisateur

Tripp Lite

Tripp Lite U460-004-2A2C-2 Manuel utilisateur

Tripp Lite

Tripp Lite B004-VUA2-K-R Manuel utilisateur

Tripp Lite

Tripp Lite B006-HD2UA2 Manuel utilisateur

Tripp Lite

Tripp Lite NetDirector B024-HU08 Manuel utilisateur

Tripp Lite

Tripp Lite PDUMH30ATNET Manuel utilisateur

Tripp Lite

Tripp Lite B032-DUA2 Manuel utilisateur

Tripp Lite

Tripp Lite U460-003-3AG-C Manuel utilisateur

Tripp Lite

Tripp Lite B004-DUA2-HR-K Manuel utilisateur

Tripp Lite

Tripp Lite B032-VUA4 Manuel utilisateur

Tripp Lite

Tripp Lite U223-004-IND-1 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur