Tripp Lite B126-2A1 Manuel utilisateur

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

HDMI Over Cat5

1x2 Extenders

Models: B126-2A1, B126-2A0

Warranty

Registration:

chance to win a FREE Tripp Lite

product—www.tripplite.com/warranty

Package Contents 2

Product Features 2

Mounting Instructions 4

Standard 1 x 2 Extender Kit Installation 5

1 x 2 Extender Kit with Remote/Repeater Installation 7

Standard Extender/Splitter Installation 10

Extender/Splitter with Remote/Repeater Installation 13

Troubleshooting 17

Warranty & Warranty Registration 19

13-08-043 93-32D0.indd 1 8/28/2013 2:17:35 PM

Package Contents

Product Features

• ExtendsanHDMIsignalto2monitorsupto200ft.fromthesource

over a single Cat5e/6 cable.

• AB126-002orB126-004extender/splittertransmitterunitisrequired

forusewiththeB126-1A01x2receiverunit.

• Extendsa1080p(60Hz)signalupto150ft.fromthesourceusing

Cat6 cabling, or up to 125 ft. using Cat5 cabling.

• Extends a 1080i (60Hz) signal up to 200 ft. from the source using

Cat6 cabling, or up to 175 ft. using Cat5 cabling.

• Use24AWG,solidwireCat5e/6cable,suchasTrippLite’sN202-Series,

toachievemaximumdistanceandresolution.

• FurtherexpandtherangeandnumberofmonitorsbyaddingB126-110

repeater units.

• AdduptothreerepeatersoneachCat5e/6channel,foratotalof4

displays per channel (An Active remote receiver should be the last unit

in a channel).

• A1080p(60Hz)signalcanbeextendedupto125ft.foreachrepeater

addedintoachannel(orupto175ft,fora1080i(60Hz)signalwhen

usingeitherCat5eorCat6cabling).

• Supports24-bitTrueColor(8-bitsperchannel).

• Built-inequalizationcontroltoadjustthevideoimage.

• B126-2A1KitorB126-2A0ReceiverUnit

• ExternalPowerSupply

(Input:100-240V,50/60Hz,0.5AOutput:5V,2A)

• MountingHardware

• ScrewdriverforEqualizationAdjustment

• Owner’sManual

13-08-043 93-32D0.indd 2 8/28/2013 2:17:35 PM

Product Features

• Supports both stereo and 7.1-channel surround sound audio

(7.1-channel surround sound signal will be Multi-Channel or PCM).

• HDCPand3Dcompatible.

• Plugandplay;Nosoftwareordriversrequired.

• Compatiblewithalloperatingsystems.

• Mountinghardwareincluded.

Optional Accessories:

• B126-110–RemoteRepeaterUnit

• N202-SeriesCat624AWG,SolidWirePatchCables

• P568-SeriesHigh-SpeedHDMICables

13-08-043 93-32D0.indd 3 8/28/2013 2:17:35 PM

Mounting Instructions

The B126-2A1 and B126-2A0 come with mounting hardware

that allows them to be mounted in a variety of ways. The following

images show the different ways the included mounting brackets

can be attached for different mounting methods. Note: The images

below show a B126-1A1 HDMI over Cat5 Receiver Unit, but the

mounting hardware installation is the same for the B126-2A1

and B126-2A0.

Wall-mount 1 Wall-mount 2

19” Rackmount Pole Mount

13-08-043 93-32D0.indd 4 8/28/2013 2:17:37 PM

OPTIONAL LOCAL

MONITOR

LOCAL

TRANSMITTER

REMOTE

RECEIVER

BLU-RAY

MONITOR 1

Up to 200 ft. at 1080i @ 60Hz (Cat6)

Up to 150 ft. at 1080p @ 60Hz (Cat6)

MONITOR 2

Standard 1 x 2 Extender Kit Installation

Notes:

1. Test to make sure that the entire installation works properly before

running cables through ceilings/walls.

2. 24 AWG, solid wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, is

required to achieve maximum distance and resolution.

3. The diagram below shows the maximum extension distance when

using Cat6 cabling. When using Cat5 cabling, the maximum extension

distance is 175 ft. at 1080i (60Hz), and 125 ft. at 1080p (60Hz).

4. The B126-2A1 is set to transmit a stereo audio signal by default.

Press the Audio button on the transmitter unit to switch to 7.1-channel

surround sound audio. (7.1-channel surround sound signal will be

Multi-Channel or PCM)

13-08-043 93-32D0.indd 5 8/28/2013 2:17:38 PM

Standard 1 x 2 Extender Kit Installation

1MakesurealldevicesbeingconnectedarepoweredOFF.

2ConnecttheHDMIsourcetotheINPUT port on the transmitter unit

usingaTrippLiteP568-SeriesHigh-SpeedHDMICable.

3Optional: Connect a monitor to the LOCAL port on the transmitter

unitusingaTrippLiteP568-SeriesHigh-SpeedHDMICable.

4Connecttheexternalpowersupplytothetransmitterunitandplugthe

transmitterunitintoaTrippLiteSurgeSuppressor,PowerDistribution

Unit(PDU),orUninterruptiblePowerSupply(UPS).ThegreenRJ45LED

illuminatestoindicatethattheunitisreceivingpowerfromtheexternal

power supply.

5UsingCat5e/6cable,connecttheRJ45portonthetransmitterunit

marked OUTPUTtotheRJ45portonthereceiverunitmarkedINPUT.

6Connect the external power supply to the receiver unit and plug the

receiverunitintoaTrippLiteSurgeSuppressor,PowerDistributionUnit

(PDU), or Uninterruptible Power Supply (UPS). The green RJ45 LED

illuminatestoindicatethattheunitisreceivingpowerfromtheexternal

power supply.

7Connect a monitor to the OUTPUT 1 port on the receiver unit using a

TrippLiteP568-SeriesHigh-SpeedHDMIcable.

8Repeat step 7 for the OUTPUT 2 port on the receiver unit.

9Turnonthepowertotheconnecteddevices.TheorangeRJ45LED’s

on the transmitter and receiver units illuminate to indicate that a

signalisbeingreceivedfromtheHDMIsource.Thevideoimagewill

now be displayed on the connected monitors.

10 Ifnecessary,usetheEqualizationcontrolonthereceiverunittoadjust

the video image. Note: An improper Equalization setting can cause

the monitor not to display an image at all. Try each setting until an

acceptable image is displayed.

13-08-043 93-32D0.indd 6 8/28/2013 2:17:38 PM

OPTIONAL LOCAL

MONITOR

B126-2A1 LOCAL

TRANSMITTER

B126-2A1 REMOTE

RECEIVER

B126-110 REMOTE

REPEATER

B126-110 REMOTE

REPEATER

B126-110 REMOTE

REPEATER

Up to 175 ft. at 1080i (60Hz)

Up to 125 ft. at 1080p (60Hz)

Up to 175 ft. at 1080i (60Hz)

Up to 125 ft. at 1080p (60Hz)

BLU-RAY

Up to 175 ft. at 1080i (60Hz)

Up to 125 ft. at 1080p (60Hz)

Up to 175 ft. at 1080i (60Hz)

Up to 125 ft. at 1080p (60Hz)

MONITOR 1 MONITOR 2

1 x 2 Extender Kit with

Remote/Repeater Installation

Notes:

1. Test to make sure that the entire installation works properly before

running cables through ceilings/walls.

2. The diagram below shows the maximum extension distance when using

either Cat5e or Cat6 cabling. 24 AWG, solid wire Cat5e/6 cable, such

as Tripp Lite’s N202-Series, is required to achieve maximum distance

and resolution.

3. The B126-2A1 is set to transmit a stereo audio signal by default.

Press the Audio button on the transmitter unit to switch to 7.1-channel

surround sound audio. (7.1-channel surround sound signal will be

Multi-Channel or PCM)

1MakesurealldevicesbeingconnectedarepoweredOFF.

2ConnecttheHDMIsourcetotheINPUT port on the transmitter unit

usingaTrippLiteP568-SeriesHigh-SpeedHDMICable.

3Optional: Connect a monitor to the LOCAL port on the transmitter

unitusingaTrippLiteP568-SeriesHigh-SpeedHDMICable.

13-08-043 93-32D0.indd 7 8/28/2013 2:17:39 PM

4Connecttheexternalpowersupplytothetransmitterunitandplugthe

transmitterunitintoaTrippLiteSurgeSuppressor,PowerDistribution

Unit(PDU),orUninterruptiblePowerSupply(UPS).ThegreenRJ45LED

illuminatestoindicatethattheunitisreceivingpowerfromtheexternal

power supply.

5UsingCat5e/6cable,connecttheRJ45portonthetransmitterunit

marked OUTPUT to the RJ45 port on the B126-110 repeater unit

marked INPUT.

6Connect a monitor to the HDMI OUTPUT port on the repeater unit

usingaTrippLiteP568-SeriesHigh-SpeedHDMICable.

7Connecttheexternalpowersupplytotherepeaterunitandplugthe

repeaterunitinto aTripp LiteSurgeSuppressor,PowerDistribution

Unit(PDU),orUninterruptiblePowerSupply(UPS).Thegreenpower

andthegreenRJ45LEDswillilluminatetoindicatethattheunitis

receivingpowerfromtheexternalpowersupply.

Upto4unitscanbedaisy-chained(3repeatersand1activereceiver).To

addadditionalrepeaterunits,proceedtostep8.Tonishyourinstallation

withtheB126-2A1receiverunit,proceedtostep11.

8UsingCat5e/6cable,connecttheRJ45portontherepeaterunitmarked

OUTPUTtotheRJ45portonasecondrepeaterunitmarkedINPUT.

9Connect a monitor to the HDMI OUTPUT port on the repeater unit

usingaTrippLiteP568-SeriesHigh-SpeedHDMICable.

10 Connecttheexternalpowersupplytotherepeaterunitandplugthe

repeaterunitinto aTripp LiteSurgeSuppressor,PowerDistribution

Unit(PDU),orUninterruptiblePowerSupply(UPS).Thegreenpower

andthegreenRJ45LEDswillilluminatetoindicatethattheunitis

receivingpowerfromtheexternalpowersupply.

1 x 2 Extender Kit with

Remote/Repeater Installation

13-08-043 93-32D0.indd 8 8/28/2013 2:17:39 PM

Toaddathirdremote/repeaterunit,repeatsteps8through10.Tonish

yourinstallationwiththeB126-2A1receiverunit,proceedtostep11.

11 Using Cat5e/6 cable, connect the RJ45 port on the repeater unit

marked OUTPUTtotheRJ45portonthereceiverunitmarkedINPUT.

12 Connect a monitor to the OUTPUT 1 port on the receiver unit using a

TrippLiteP568-SeriesHigh-SpeedHDMIcable.

13 Repeat step 12 for the OUTPUT 2 port on the receiver unit.

14 Connecttheexternalpowersupplytothereceiverunitandplugthe

receiver unit into a Tripp Lite Surge Suppressor, Power Distribution

Unit(PDU),orUninterruptiblePowerSupply(UPS).ThegreenRJ45

LEDilluminatestoindicatethatitisreceivingpowerfromtheexternal

power supply.

15 Turnonthepowertotheconnecteddevices.TheorangeRJ45LEDs

on all units will illuminate to indicate that a signal is being received

fromtheHDMIsource.Thevideoimagewillnowbedisplayedonthe

connected monitors.

16 Ifnecessary,usetheEqualization control on the repeater and receiver

units to adjust the video image. Note: An improper Equalization

setting can cause the monitor not to display an image at all. Try each

setting until an acceptable image is displayed.

1 x 2 Extender Kit with

Remote/Repeater Installation

13-08-043 93-32D0.indd 9 8/28/2013 2:17:40 PM

Standard Extender/Splitter Installation

Notes:

1. Test to make sure that the entire installation works properly before

running cables through ceilings/walls.

2. 24 AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series,

is required to achieve maximum distance and resolution.

3. The diagram below shows the maximum extension distance when

using Cat6 cabling. When using Cat5 cabling, the maximum extension

distance is 175 ft. at 1080i (60Hz), and 125 ft. at 1080p (60Hz).

4. The B126-002 and B126-004 are set to transmit a stereo audio

signal by default. Press the Audio button on the transmitter unit to

switch to 7.1-channel surround sound audio. (7.1-channel surround

sound signal will be Multi-Channel or PCM)

5. The diagram below shows the B126-004 transmitter unit. Installation

is the same for the B126-002, except that there are only two output

ports and no local monitor port.

6. Although the installation instructions below mention the B126-2A0 1x2

receiver unit only, Tripp Lite offers several standard receiver units that

can be used in the event that only one monitor is required on the remote

end: B126-1A0, B126-1A0-WP-1, B126-1P0, and B126-1P0-WP-1.

13-08-043 93-32D0.indd 10 8/28/2013 2:17:40 PM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tripp Lite Extenseur

Tripp Lite

Tripp Lite B127U-111-PDPD Manuel utilisateur

Tripp Lite

Tripp Lite B126-1A1-WHD4HH Manuel utilisateur

Tripp Lite

Tripp Lite HDMI B122-000-60 Manuel utilisateur

Tripp Lite

Tripp Lite B013-330 Manuel utilisateur

Tripp Lite

Tripp Lite B126-1A1SR Manuel utilisateur

Tripp Lite

Tripp Lite B051-000-AC Manuel utilisateur

Tripp Lite

Tripp Lite P130-000-AUD4K6 Manuel utilisateur

Tripp Lite

Tripp Lite B150-1A1-DVI Manuel utilisateur

Tripp Lite

Tripp Lite B203-101-IND-ER Manuel utilisateur

Tripp Lite

Tripp Lite B127U-111-PHPH Manuel utilisateur

Tripp Lite

Tripp Lite P167-000 Manuel utilisateur

Tripp Lite

Tripp Lite 0DT23001 Manuel utilisateur

Tripp Lite

Tripp Lite B127-1A1-CH Manuel utilisateur

Tripp Lite

Tripp Lite U224-1R4-R Manuel utilisateur

Tripp Lite

Tripp Lite P167-000 Manuel utilisateur

Tripp Lite

Tripp Lite HDMI B122-000 Manuel utilisateur

Tripp Lite

Tripp Lite B127A-1A1-FHFH Manuel utilisateur

Tripp Lite

Tripp Lite Cat5 Smart KVM Extender Manuel utilisateur

Tripp Lite

Tripp Lite 0DT23008 Manuel utilisateur

Tripp Lite

Tripp Lite B126-1A1SR Manuel utilisateur

Tripp Lite

Tripp Lite B130-101A Manuel utilisateur

Tripp Lite

Tripp Lite P130-000-AUDIO2 Manuel utilisateur

Tripp Lite

Tripp Lite B130-101A-WP-1 Guide d'installation

Tripp Lite

Tripp Lite P142-06N-SC4K Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur