Trikdis G16T Manuel utilisateur

www.trikdis.lt  UAB Trikdis  Draugystės str. 17, LT-51229 Kaunas, Lithuania  +370 37 408 040  info@trikdis.lt

Cellular communicator G16T

Installation manual

October, 2018

www.trikdis.com 2 October, 2018

Cellular

communicator

G16T

Contents

DESCRIPTION ................................................................................................................................................................. 4

COMMUNICATOR MODEL TYPES ............................................................................................................................................4

SPECIFICATIONS .................................................................................................................................................................4

COMMUNICATOR ELEMENTS .................................................................................................................................................4

PURPOSE OF TERMINALS ......................................................................................................................................................5

LED INDICATION OF OPERATION ............................................................................................................................................6

STRUCTURAL SCHEMATIC WITH G16T USAGE ...........................................................................................................................6

QUICK CONFIGURATION WITH TRIKDISCONFIG SOFTWARE .......................................................................................... 7

SETTINGS FOR CONNECTION WITH PROTEGUS APP .....................................................................................................................8

SETTINGS FOR CONNECTION WITH ALARM RECEIVING CENTER .....................................................................................................9

INSTALLATION AND WIRING ....................................................................................................................................... 10

PHYSICAL INSTALLATION PROCESS ........................................................................................................................................10

WIRING COMMUNICATOR TO THE SECURITY CONTROL PANEL ....................................................................................................11

SCHEMATICS FOR CONNECTING TO PANEL KEYSWITCH ZONE ......................................................................................................12

SCHEMATICS FOR WIRING INPUTS ........................................................................................................................................12

SCHEMATICS FOR WIRING A RELAY .......................................................................................................................................13

SCHEMATICS FOR CONNECTING IO SERIES EXPANSION MODULES ................................................................................................13

TURN ON THE COMMUNICATOR ..........................................................................................................................................13

PROGRAMMING THE CONTROL PANEL ....................................................................................................................... 13

PROGRAMMING HONEYWELL VISTA LANDLINE DIALER .............................................................................................................14

SPECIAL SETTINGS FOR HONEYWELL VISTA 48 PANEL ...............................................................................................................14

REMOTE CONTROL ...................................................................................................................................................... 14

ADDING THE SECURITY SYSTEM TO PROTEGUS APP ..................................................................................................................14

ADDITIONAL SETTINGS TO ARM/DISARM THE ALARM SYSTEM USING CONTROL PANEL’S KEYSWITCH ZONE ...........................................16

ARMING/DISARMING THE ALARM SYSTEM WITH PROTEGUS ......................................................................................................16

CONFIGURATION AND CONTROL WITH SMS MESSAGES ............................................................................................................17

TRIKDISCONFIG WINDOW DESCRIPTION ..................................................................................................................... 17

TRIKDISCONFIG STATUS BAR DESCRIPTION .............................................................................................................................17

“SYSTEM SETTINGS” WINDOW ............................................................................................................................................18

“ARC” REPORTING WINDOW ..............................................................................................................................................19

“USER REPORTING” WINDOW .............................................................................................................................................21

“SIM CARD” WINDOW ......................................................................................................................................................23

“RS485 MODULES” WINDOW ............................................................................................................................................23

“EVENT SUMMARY” WINDOW ............................................................................................................................................25

RESTORING FACTORY SETTINGS ...........................................................................................................................................26

REMOTE CONFIGURATION .......................................................................................................................................... 26

TEST COMMUNICATOR PERFORMANCE ...................................................................................................................... 26

MANUAL FIRMWARE UPDATE ..................................................................................................................................... 27

www.trikdis.com 3 October, 2018

Cellular

communicator

G16T

Safety requirements

The communicator should be installed and maintained by qualified personnel.

Prior to installation, please read this manual carefully in order to avoid mistakes that can lead to malfunction or even

damage to the equipment.

Disconnect the power supply before making any electrical connections.

Changes, modifications or repairs not authorized by the manufacturer shall void your rights under the warranty.

Please act according to your local rules and do not dispose of your unusable alarm system or its components with

other household waste.

www.trikdis.com 4 October, 2018

Cellular

communicator

G16T

Description

Cellular communicator G16T can be connected to any alarm panel that has a landline dialer and supports dialing in Contact ID

protocol with DTMF tones.

The communicator can transmit full event information to the security company’s monitoring station receiver.

The communicator works with the Protegus app. Users can control their alarm system remotely and receive notifications about

events. Protegus app works with all security alarm panels to which the communicator is connected to, regardless of

manufacturer. Communicator can transmit event notifications to the Central Monitoring Station and work with Protegus

simultaneously.

Cellular communicators G16T are certified to the highest EN50131 Grade 4 security rating.

Features

Connects to panel’s landline dialer:

 Communicator can be connected to control panel’s

landline dialer with 2 or 4 wires.

 When connected with 4 wires, the landline between

the panel and communicator will be monitored.

Sends events to monitoring station receiver:

 Sends events to TRIKDIS software or hardware

receivers that work with any monitoring software.

 Can send event messages to SIA DC-09 receivers.

 Connection supervision by polling to IP receiver every

30 seconds (or by user defined period).

 Backup channel, that will be used if connection with

the primary channel is lost.

 Events can be reported to CMS with SMS messages.

SMS will be sent even if data connection stops

working in the mobile operator network.

 With parallel communication channels events can be

sent to two receivers at same time.

 When Protegus service is enabled, events are first

delivered to CMS, and only then are sent to app users.

Works with Protegus app:

 “Push” and special sound notifications informing

about events.

 Remote system Arm/Disarm.

 Remote control of connected devices (lights, gates,

ventilation systems, heating, sprinklers, etc.).

 Remote temperature monitoring (with iO or iO-WL

expanders).

 Different user rights for administrator, installer and

user.

 Users can also be informed about events with SMS

messages and phone calls.

Notifies users:

 Users can be notified about events not only with

Protegus app, but also with SMS messages and a call.

Controllable outputs and inputs:

 1 output, controlled via:

o Protegus app.

o SMS message.

 2 inputs, selectable type: NC; NO; NC/EOL; NO/EOL;

NC/DEOL; NO/DEOL.

 Add additional inputs and controllable outputs with

wired and wireless iO expanders.

Quick setup:

 Settings can be saved to file and quickly written to

other communicators.

 Two access levels for configuring the device for CMS

administrator and for installer.

 Remote configuration and firmware updates.

www.trikdis.com 4 October, 2018

Cellular

communicator

G16T

Communicator model types

This manual applies to these G16T models:

 G16T_321x – version 3, 2G modem, 1 SIM

 G16T_331x – version 3, 3G modem, 1 SIM

 G16T_341x – version 3, 4G modem, 1 SIM

 G16T_3M1x – version 3, 4G modem CatM1, 1 SIM.

Specifications

Parameter Description

Connects to panel Landline dialer (TIP RING contacts)

Inputs 2 selectable type inputs, NC;NO; NC/EOL; NO/EOL; NC/DEOL; NO/DEOL

Expandable with iO series expanders

Output 1, OC type, up to 0,15 A, 30 V max

Expandable with iO series expanders

2G modem frequencies 850 / 900 / 1800 / 1900 MHz

3G modem frequencies 800 / 850 / 900 / 1900 / 2100 MHz

4G modem frequencies Depends on region

Power supply voltage 10-18 V DC

Current consumption 60-100 mA (on standby)

Up to 250 mA (while sending data)

Transmission protocols TRK, DC-09_2007, DC-09_2012

Message encryption AES 128

Changing settings With TrikdisConfig computer program remotely or locally via USB Mini-B port

Remotely with SMS messages

Operating environment Temperature from -10 °C to 50 °C, relative humidity - up to 80% at +20 °C

Communicator dimensions 92 x 65 x 26 mm

Weight 80 g

Communicator elements

1. Cellular antenna SMA connector

2. Light indicators

3. Frontal case opening slot

4. Terminal for external connections

5. USB Mini-B port for communicator

programming

6. SIM card slot

www.trikdis.lt  UAB Trikdis  Draugystės str. 17, LT-51229 Kaunas, Lithuania  +370 37 408 040  info@trikdis.lt

Purpose of terminals

Terminal Description

+DC +10 V/+18 V power supply

-DC +10 V/+18 V power supply

TIP Terminal to connect with security control panel TIP terminal

RING Terminal to connect with security control panel RING terminal

T-1 / IN1 Terminal for monitoring the telephone line or an input terminal, selectable type: NC; NO; NC/EOL;

NO/EOL; NC/DEOL; NO/DEOL

R-1 / IN2 Terminal for monitoring the telephone line or an input terminal, selectable type: NC; NO; NC/EOL;

NO/EOL; NC/DEOL; NO/DEOL

COM Common terminal (negative)

OUT Output terminal (OC type), current up to 0,15 A

A 485 RS485 bus A contact

B 485 RS485 bus B contact

www.trikdis.com 6 October, 2018

Cellular

communicator

G16T

LED indication of operation

Indicator Light status Description

NETWORK Off No connection to cellular network.

Yellow blinking Connecting to cellular network.

Green solid with

yellow blinking

Communicator is connected to cellular network.

Sufficient cellular signal strength for 2G is level 5 (five yellow flashes) and for

3G, 4G network - level 3 (three yellow flashes).

DATA Off No unseen events.

Green solid Unsent event events are stored in buffer.

Green blinking (Configuration mode) Data is transferred to/from communicator.

POWER Off Power supply is off or disconnected.

Green solid Power supply is on with sufficient voltage.

Yellow solid Power supply voltage is not sufficient (≤11.5V).

Green solid and

yellow blinking

(Configuration mode) Communicator is ready for configuration.

Yellow solid (Configuration mode) No connection with computer.

TROUBLE OFF No operation problems.

1 red blink SIM card not found.

2 red blinks SIM card PIN code problem (incorrect PIN code).

3 red blinks Programming problem (No APN).

4 red blinks Registration to GSM network problem.

5 red blinks Registration to mobile data network problem.

6 red blinks No connection with the receiver.

7 red blinks Lost connection with control panel.

Red blinking (Configuration mode) Memory fault.

Red solid (Configuration mode) Firmware is corrupted.

Structural schematic with G16T usage

Note: Before you begin, make sure that you have the necessary:

www.trikdis.com 7 October, 2018

Cellular

communicator

G16T

1) USB cable (Mini-B type) for configuration.

2) At least 4-wire cable for connecting communicator to control panel.

3) Flat-head 2.5mm screwdriver.

4) Sufficient gain cellular antenna if network coverage in the area is poor.

5) Activated Nano-SIM card (PIN code request can be turned off).

6) Particular security control panel`s installation manual.

Order the necessary components separately from your local distributor.

Quick configuration with TrikdisConfig software

1. Download configuration software TrikdisConfig from www.trikdis.com (type “TrikdisConfig” in the search field) and install

it.

2. Open the casing of the G16T with a flat-head screwdriver as shown below:

3. Using a USB Mini-B cable connect the G16T to the computer.

4. Run TrikdisConfig. The software will automatically recognize the connected communicator and will open a window for

configuration.

5. Click Read [F4] to read the communicator’s settings. If requested, enter the Administrator or Installer 6-digit code in the

pop-up window.

Below we describe what settings need to be set for the communicator to begin sending events to the Central Monitoring Station

and to allow the security control to be controlled with the Protegus app.

www.trikdis.com 8 October, 2018

Cellular

communicator

G16T

Settings for connection with Protegus app

In “User reporting window” “PROTEGUS Cloud” tab:

1) Select checkbox Enable connection to the PROTEGUS Cloud.

2) You can change the Cloud access Code for logging into Protegus if you want users to be asked to enter it when adding

the system to Protegus app (default password - 123456).

In “SIM card” window:

3) Enter SIM card PIN code.

4) Change APN name. APN can be found on the website of the SIM card operator (“internet” is universal and works in many

operator networks).

After finishing configuration, click the button Write [F5] and disconnect the USB cable.

Note: For more information about other G16T settings in TrikdisConfig, see chapter 6 TrikdisConfig window

description.

Important: Do not forget to turn on the landline dialer of the alarm panel and set it up correctly, so that the panel would

send the events. Alarm panel setup is described in chapter 4 Programming the control panel.

www.trikdis.com 9 October, 2018

Cellular

communicator

G16T

Settings for connection with Alarm Receiving Center

In “System settings” window:

1) Enter Object ID (account) number provided by the Central Monitoring Station (4 characters, 0-9, A-F).

In “ARC reporting” window settings for “Primary channel”:

2) Communication type - select the IP connection method (we do not recommend SMS as the primary channel).

3) Protocol - select the protocol type for your event messages: TRK (to TRIKDIS receivers), DC-09_2007 or DC-09_2012 (to

universal receivers).

4) TRK encryption key - enter the encryption key that is set in the receiver.

5) Domain or IP - enter the receiver’s Domain or IP address.

6) Port - enter receiver’s network port number.

7) TCP or UDP - choose event transmission protocol (TCP or UDP) in which events should be sent.

Note: If you want to set communication with ARC via SMS messages, you only need to set Encryption key and Phone

number. SMS messages can be received only by TRIKDIS receivers: IP/SMS receiver RL14, multichannel receiver

RM14 and SMS receiver GM14.

Autres manuels pour G16T

Table des matières

Autres manuels Trikdis Téléphone portable

Trikdis

Trikdis G10T Manuel utilisateur

Trikdis

Trikdis G10 Manuel utilisateur

Trikdis

Trikdis G10D Manuel utilisateur

Trikdis

Trikdis G16T 3 Series Manuel utilisateur

Trikdis

Trikdis G16 Manuel utilisateur

Trikdis

Trikdis GET Manuel utilisateur

Trikdis

Trikdis E10Tv2 Manuel utilisateur

Trikdis

Trikdis G17F Manuel utilisateur

Trikdis

Trikdis G09 Manuel utilisateur

Trikdis

Trikdis FireCom Manuel utilisateur

Trikdis

Trikdis G17F Manuel utilisateur

Trikdis

Trikdis E14 Manuel utilisateur

Trikdis

Trikdis E16T Manuel utilisateur

Trikdis

Trikdis G16T Manuel utilisateur

Trikdis

Trikdis G16 Manuel utilisateur

Trikdis

Trikdis G16T Manuel utilisateur

Trikdis

Trikdis Ethernet E16 Manuel utilisateur

Trikdis

Trikdis E10T Manuel utilisateur

Trikdis

Trikdis G10 Manuel utilisateur

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur