Trikdis E10T Manuel utilisateur

Ethernet communicator E10Tv2

USER MANUAL

UAB “TRIKDIS”

Draugystės str. 17,

LT-51229 Kaunas

LITHUANIA

E-mail: info@trikdis.lt

Webpage: www.trikdis.lt

Ethernet communicator E10Tv2

Contents

SAFETY REQUIREMENTS............................................................................................................... 2

DESCRIPTION ....................................................................................................................... 3

1.1 TECHNICAL PARAMETERS .................................................................................................................. 3

1.2 PACKAGE CONTENTS ........................................................................................................................ 4

1.3 COMMUNICATOR STRUCTURE ............................................................................................................ 4

1.4 TERMINAL BLOCK DESCRIPTION........................................................................................................... 4

1.5 LIGHT INDICATION ........................................................................................................................... 4

1.6 CONFIGURATION OF SECURITY CONTROL PANEL...................................................................................... 5

1.7 BEFORE YOU BEGIN .......................................................................................................................... 5

1.8 SYSTEM VIEW .................................................................................................................................5

CONNECTING TO COMMUNICATOR ...................................................................................... 5

SETTING OPERATION PARAMETERS ...................................................................................... 6

3.1 SYSTEM SETTINGS ............................................................................................................................6

3.2 REPORTING →ALARM RECEIVING CENTRE (ARC) REPORTING .................................................................. 7

3.3 REPORTING →PROTEGUS SERVICE...................................................................................................... 8

3.4 EVENT SUMMARY............................................................................................................................ 8

INSTALLATION PROCESS ....................................................................................................... 9

4.1 CONNECT THE COMMUNICATOR TO THE CONTROL PANEL .........................................................................9

4.2 (OPTIONAL)CONNECT SENSORS.......................................................................................................... 9

4.3 CONNECT LAN CABLE.......................................................................................................................9

4.4 TURN ON POWER SUPPLY ................................................................................................................10

4.5 PERFORM SYSTEM TEST...................................................................................................................10

TRIKDISCONFIG REMOTE CONTROL..................................................................................... 10

MANUAL FIRMWARE UPDATE ............................................................................................ 11

Safety Requirements

The security alarm system should be installed and maintained by qualified personnel.

Prior to installation, please read carefully this manual in order to avoid mistakes that can lead to malfunction

or even damage to the equipment.

Disconnect power before making any electrical connections.

Changes, modifications or repairs not authorized by the manufacturer shall void your rights under the

warranty.

Please act according to your local rules and do not dispose of your unusable alarm system or its

components with other household waste.

Ethernet communicator E10Tv2

Description

Communicator E10Tv2 is intended to upgrade intruder alarm panel which have telephone line communicator

(TLC) for event signaling wired Internet (Ethernet).

Customers are informed about security system events in Protegus app. Communicator transmits full event

information to Alarm Receiving Centre.

Features

1.1 Technical Parameters

Parameter

Description

Power supply voltage

12,6 ± 3 VDC

Current consumption

120 mA (stand-by),

Up to 250 mA (transmitting)

Ethernet connection

IEEE802.3, 10 Base-T, RJ45 socket

Data pack content

Contact ID format codes

Memory

Up to 100 messages

Input

1, NC/NO/EOL-2,2 kΩ type

Operating environment

From -10 °C to 50 °C, with relative air humidity 80% when +20 °C

Dimensions

65 x 79 x 25 mm

Connection

Connection to control panels via:

TLC terminal connection

Communications

Simultaneous event reporting to Protegus

Mobile/Web application, allowing user to remotely

monitor alarm system

Communicator transfers all messages from control

panel in Contact ID codes

Messages in TCP/IP or UDP/IP protocol are sent to

ARC

In case of lost connection with the main channel,

switches automatically to backup channel

Input

1 input, type: NC, NO, EOL = 2.2 kΩ

Configuration

Quick and easy configuration and firmware updates

Two access levels for setting of operating parameters

Ethernet communicator E10Tv2

1.2 Package Contents

Module E10Tv2

1 pc.

User manual

1 pc.

Two-sided adhesive tape (10 cm)

1 pc.

1.3 Communicator structure

1.4 Terminal block description

Contact

Description

+12V power supply terminal

COM

Common ground terminal

T-CP

For connecting to the security control panel Tip terminal

R-CP

For connecting to the security control panel Ring terminal

T-TL

For connecting a telephone landline

R-TL

For connecting a telephone landline

IN1

1st input terminal for connection of external circuits (type NC)

COM

Common ground terminal

MCI

Data bus for connecting report transmission device

1.5 Light indication

LED

Operation

Description

“Network” displays the status of

connection to the Internet

Green ON

Module is connected to the Internet

Yellow ON

TCP/IP session is open

“Data” displays data transfer

Green ON

Unsent messages present

Red ON

Messages cannot be sent

Green flashing

Messages are being received from the

control panel

“Power” displays power supply

status and the functioning of the

microprocessor

Green flashing

Power supply is sufficient

Yellow flashing

Power supply is not sufficient (≤11,5 V)

Ethernet connection RJ45 socket

Light indicators

USB Mini-B port for communicator programming

Terminal for external connections

Note: USB cable (Mini-B type) for

programming the communicator

via USB is not included.

Ethernet communicator E10Tv2

1.6 Configuration of security control panel

Use programming manual of particular security control panel and set operation parameters of telephone

communicator as following:

1) Enable the PSTN dialer of the panel.

2) Select DTMF mode.

3) Select Contact ID communication format.

4) If communicator is connected to a real telephone landline, enter a telephone number - 1234 for dialing,

(If it is not connected to landline, any number not shorter than 2-digits, can be used).

5) Enter a 4-digit account number in the panel.

1.7 Before you begin

Before you begin, make sure that you have needed system requirements:

1) USB cable (Mini-B type, not included) for communicator E10Tv2 onfiguration.

2) CAT-5 Ethernet cable (maximum 100m, not included).

3) At least 4 wires cable for connecting communicator to control panel.

1.8 System view

Connecting E10Tv2 to TrikdisConfig

Communicator can be configured using TrikdisConfig software via USB cable or remotely. The software is

available on www.trikdis.com and operates in MS Windows OS.

1) Download and install TrikdisConfig.

2) Connect the communicator to the computer using USB cable or remotely.

a. Using USB cable: run the configuration software TrikdisConfig. The software will automatically

recognise the connected device and will open a window for communicator configuration.

IMPORTANT: To use remote configuration function, first communicator has to be configured via USB cable

and Protegus service must be enabled.

MOBILE/WEB

APPLICATION

PROTEGUS SERVER

INTERNET

MONITORING

SOFTWARE

CONTROL PANEL

ETHERNET

COMMUNICATOR

RECEIVER

Ethernet communicator E10Tv2

b. Remotely: run the configuration software TrikdisConfig. In section Remote access, field Unique ID

enter MAC address of communicator (MAC address is provided on the product package). (Optional) in

the field System Name enter the desired name to the module. Press Configure.

3) Click Read [F4] to read the communicators parameters and enter the Administrator or Installer code in the

pop-up window. In order for the program to remember the code, check the box next to Remember

password.

4) To open a configuration file, click Open [F8].

Setting operation parameters

3.1 System settings

Settings →General:

•Write an appropriate Account number (4 symbols hexadecimal number).

•Select Use security panel account ID checkbox if messages from the security control panel must contain

its identification number.

•Test period: periodic test messages will be sent according to a time interval set in this section

Settings → Ethernet settings

•Internal MAC is unique for each Ethernet communicator, and it is not changeable.

Note: When new firmware is released, TrikdisConfig will ask if firmware can be updated, click yes, and new

window will open.

In order to save the previously entered data, check Preserve settings box.

Press Update [F12] and new firmware will be written to the communicator.

Note: if administrator code is set as default (123456), it is not required to enter it and the request window

will not appear.

Ethernet communicator E10Tv2

•When Use DHCP checkbox is selected, module registration in the network will be done automatically.

oIf automatic registration is unsuccessful, enter Internal IP address, subnet Mask and Gateway address

manually. E10Tv2 supports DNS service;

Settings → Access

•Administrator code - allows full access to the configuration.

•Installer code - allows access to the configuration, limited by administrator. Administrator can allow

installer to change:

oAccount number;

oReporting;

oEthernet settings;

oEvent summary.

3.2 Reporting → Alarm Receiving Centre (ARC) reporting

Reporting → Primary and backup

To have connection with Primary and Backup channels mark checkboxes Enable.

Fill in fields for Remote Host,Remote Port.

Choose reporting protocol TCP or UDP.

Enable PING Time and set time between signals in seconds (required for communication control).

Enter Encryption key (six-symbol hexadecimal number).

Reporting →Settings

Choose TCP protocol (an encryption protocol for messages to be sent to the monitoring station).

Enter MCI slave address to communicate with connected event message generating device.

Note: if administrator code is set as default (123456), it is not required to enter it and the request window

will not appear.

Ethernet communicator E10Tv2

3.3 Reporting → Protegus service

Protegus service allows users to remotely monitor and control the communicator.

Protegus service allows simultaneous transmission of data to the Protegus server for Mobile/Web application.

For more information about PROTEGUS service visit http://www.protegus.eu/.

Enable cloud service at Reporting → PROTEGUS service tab.

Enter Service code (default code –123456), for more safety change it to 6-symbol authentication code.

This code is used, when adding new system to the application and controlling remotely via TrikdisConfig

software (for more details refer to 5. TrikdisConfig remote control).

3.4 Event Summary

Input description

•Describe input by filling in fields (these will be sent if Alarm/Restore occurs):

oPartition;

oContact ID - can be customized or left default value;

oZone No - describe which zone will be controlled with IN 1;

•Select Type of input (NO, NC, EOL);

•Enable: report when event occurs (Alarm); report when input line will restore (Restore).

Internal events description

•To describe internal events select event type (Event or Restore), Contact ID code can be changed, enter

Partitions and Zone.

Ethernet communicator E10Tv2

3.5 After all parameters are set click Write [F5], to write parameters from

TrikdisConfig program to communicator.

3.6 To create a configuration file which contains current parameters, click Save [F9].

3.7 Disconnect device:

Click Disconnect to disconnect from access level (installer or admin) while communicator is connected

via USB cable to a computer (role indication will be gone from status bar).

If a configuration is done via USB cable, unplug the USB cable; click Disconnect to go back to the first

window.

Installation process

4.1 Connect the communicator to the control panel using wiring diagram below

4.2 (Optional) connect sensors

The communicator contains one input terminal (IN1) for connection of sensors, it can be NC, NO or EOL.

4.3 Connect LAN cable

NC, Normally Closed

NO, Normally Open

EOL, End of line

Communicator E10Tv2

LAN cable

LAN connection jack

This connection is optional

power +12Vdc

Ethernet communicator E10Tv2

4.4 Turn on power supply

4.5 Perform system test

1) After configuration and installation is complete, perform a system test. Activate an event in the control

panel, and make sure that the event arrives to the alarm receiving centre or is received by the mobile

application.

2) To test communicator input, activate it and make sure that the correct messages arrives to recipients (app

users).

Protegus WEB service

To receive notifications to Protegus application, register your communicator to Protegus web service:

1) Log in or sign in to https://www.protegus.eu/login.

2) Add the system to the Protegus: press “Select system”; next “Add new system +”, and enter the

required data as shown below (you can skip fields “Name”, “Address” and fill it later).

TrikdisConfig Remote control

Communicator E10Tv2 can be controlled remotely using TrikdisConfig software. To do so, follow steps below:

1) Open TrikdisConfig.

2) At the field Remote access, in the field Unique ID enter the MAC address. MAC address is provided on the

product package.

3) (Optional) In the field System Name enter the desired name to the module.

4) Press Control button.

5) Enter Self-service code: it is the same code as Protegus service code (3.3 Reporting → Protegus service).

Enter MAC (it can be found:

on packing box;

back of communicator`s

housing;

in TrikdisConfig as Unique ID).

Leave this field empty

Table des matières

Autres manuels Trikdis Téléphone portable

Trikdis

Trikdis G10 Manuel utilisateur

Trikdis

Trikdis GET Manuel utilisateur

Trikdis

Trikdis G10 Manuel utilisateur

Trikdis

Trikdis G09 Manuel utilisateur

Trikdis

Trikdis FireCom Manuel utilisateur

Trikdis

Trikdis E14 Manuel utilisateur

Trikdis

Trikdis G17F Manuel utilisateur

Trikdis

Trikdis G17F Manuel utilisateur

Trikdis

Trikdis G10D Manuel utilisateur

Trikdis

Trikdis G16 Manuel utilisateur

Trikdis

Trikdis E16T Manuel utilisateur

Trikdis

Trikdis E10Tv2 Manuel utilisateur

Trikdis

Trikdis Ethernet E16 Manuel utilisateur

Trikdis

Trikdis G10T Manuel utilisateur

Trikdis

Trikdis G16 Manuel utilisateur

Trikdis

Trikdis G16T Manuel utilisateur

Trikdis

Trikdis G16T Manuel utilisateur

Trikdis

Trikdis G16T Manuel utilisateur

Trikdis

Trikdis G16T 3 Series Manuel utilisateur

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur