TRI tool 301SP Manuel utilisateur
Operation
Manual
92-0579 Rev. 190612
Model 301SP Tube Squaring Machine
Model 301SP Tube Squaring Machine
92-0579 Rev. 190612 1
TABLE OF CONTENTS
Tri Tool Inc Warranty 2
Tool Bit Resharpening Policy 2
About the Manual 3
Safety 4
General Description 6
Specications8
Maintenance 9
Operation 10
Chip Guard with Door Installation 16
Cutting Speeds and Feeds 19
Saddle Sets 20
Tool Bits 26
Troubleshooting28
Accessories 30
Illustrated Parts Breakdown 31
92-0579 Rev. 190612
Model 301SP Tube Squaring Machine
92-0579 FRONT COVER
TRI TOOL INC.
92-0579 Rev. 190612
2
TRI TOOL INC. Warranty
All products manufactured by Tri Tool Inc., except for tool bits and for other consumable
items, are warranted to the original purchaser to be free from defects in materials and
workmanship under normal use for a period of one year from the date of purchase.
The purchaser shall bear all shipping, packing and insurance costs and all other costs
to and from a designated repair service center. The product will be returned to the
purchaser freight prepaid and billed to the purchaser.
The warranty will not apply to those products that have been misused, abused, or altered
without the express permission in writing by Tri Tool Inc.
Neither this warranty nor any other warranty, expressed or implied, including implied
warrantiesofmechanicalability,tnessforaparticularuse,ormerchantability,shall
extend beyond the warranty period. No responsibility is assumed for any incidental or
consequential damages.
Some states do not allow limitations on how long an implied warranty lasts and some
states do not allow the exclusion or limitations incidental or consequential damages, so
the above limitation of exclusion does not apply to all purchasers. This warranty gives the
purchaserspeciclegalrights.Otherrightsvaryfromstatetostate.
Tool Bit Resharpening Policy
Tri Tool Inc. can not resharpen badly gouged, chipped, or broken tool bits. Check the tool
bits before you send them and package them well. Within two working days of receipt,
the tool bits are evaluated and the customer is contacted for authorization.
The customer will receive a price and a scheduled return shipment date. The price
structure is available from your Tri Tool Inc. sales representative.
Tool bits that are not suitable for resharpening are returned with the tool bits that were
resharpened, unless Tri Tool Inc. is instructed otherwise.
The customer is responsible for shipping charges to and from Tri Tool Inc.
This policy only covers tool bits manufactured by Tri Tool Inc.
Model 301SP Tube Squaring Machine
92-0579 Rev. 190612 3
1. ABOUT THE MANUAL
1.1 Copyright
©Copyright Tri Tool Inc. Proprietary property of Tri Tool Inc. No reproduction, use, or
duplication of the information shown hereon is permitted without the express written
consent of Tri Tool Inc.
1.2 Disclaimer
The instructions and descriptions in this manual were accurate when the manual was
written. However, the information in the manual is subject to change without notice.
Check for updated information before you start any job. The Tri Tool Inc. web site has the
most current information.
Do not operate or work on this equipment unless you have read and understood
the instructions in this Manual. Failure to follow the instructions or follow the safety
instructions could result in serious injury or death. This manual describes conditions and
hazards that are common and anticipated during equipment operation. No manual can
address all conditions which may occur.
1.3 Safety Symbols
The manual may contain one or more safety symbols. These symbols and the
associated text warn you of potentially hazardous conditions. Examples of the
safety symbols and the associated text follow:
DANGER
DANGER: Indicates a hazardous situation that, if not avoided, will result in
serious injury or death.
WARNING
WARNING: Indicates a hazardous situation that, if not avoided, could result in
serious injury or death.
CAUTION
CAUTION: Indicates a hazardous situation that, if not avoided, could result in
minor or moderate injury, or cause property damage.
TRI TOOL INC.
92-0579 Rev. 190612
4
2. SAFETY PRECAUTIONS
2.1 In General
Use standard safety equipment such as: hard hats, safety shoes, safety harnesses,
protective clothes, and other safety devices when appropriate.
Operatethistoolonlyinaccordancewithspecicoperatinginstructions.
2.2 Personal Protective Equipment
Use standard safety equipment such as: hard hats, safety shoes, safety harnesses,
protective clothes, and other safety devices when appropriate.
Wear safety glasses.
Do not wear loose clothing or jewelry.
Wear nonskid footwear.
Put long hair in a cap or a net to make sure hair does not get tangled in equipment.
2.3 Personnel
Only personnel who are trained or are being trained may operate the equipment.
Keep the operation manual available where the equipment is used.
The operator must read the operation manual before using the equipment.
The equipment must be operated in accordance with the manual information.
The operator must follow the safety precautions in this manual and good engineering
practices to reduce the risk of injury.
Before using the equipment, the operator must ensure that all safety messages on the
equipment are legible.
2.4 Work Area
Keep the work area clean.
Keep the area well lit.
Keep items such as electrical cords, cables, rags, rigging straps, away from rotating
equipment.
WARNING
WARNING: Do not override the dead-man switch on the power unit. Locking down,
obstructing, or in any way defeating the dead-man switch on the power drive unit
may result in serious injury.
Model 301SP Tube Squaring Machine
92-0579 Rev. 190612 5
Donotusepower-cuttingtoolsinthepresenceofammableliquidsandgases.
Do not let visitors or untrained personnel near tools that are in use.
Ensure all observers wear eye protection.
Keep proper footing at all times.
2.5 Area Equipment
Secure the pipe with clamps, vises, chains or straps.
Ensure that both sides of the pipe at the cut site is fully supported so that the pipe will
not move after the cut is completed. Long lengths of pipe may be under load and the
separation of the pipe can release pressure. This pressure can cause both sides of the
pipe to move.
2.6 Tool Care
Keep tools in good operating condition. Sharp tool bits perform better and are safer than
dull tool bits.
Do not use damaged tools. Always check your tools for damage especially if a tool has
malfunctioned, been dropped or hit, check it for damage.
Before you start operating the equipment, do no-load tests and feed function checks.
2.7 Tool Use
Use the right tool and tool bit for the job. Contact Tri Tool to help with your application.
Keep the tool bits fully engaged in the tool bit holders. Loose bits are sharp and can
cause cuts or punctures.
Disconnect power supply during setup and maintenance. Use all ‘Stop’ or Shut off’
features available when changing or adjusting tool bits, maintaining the tool, or when the
tool is not in use.
Remove adjusting keys and wrenches before applying power to the equipment. Check
the tool before turning it on to make sure that all keys and wrenches have been removed.
Do not force tools. Tools and tool bits function better and safer when used at the
recommended speeds.
Do not reach into rotating equipment.
Do not reach into the rotating head stock to remove chips, to make adjustments, or to
checkthesurfacenish.
Handle chips with care. Chips have very sharp edges and are hot. Do not try to pull
chips apart with bare hands.
Store tools properly. Disconnect tools from the power source, remove the tool bits, and
store in a safe place.
TRI TOOL INC.
92-0579 Rev. 190612
6
3. GENERAL DESCRIPTION
The Model 301SP Tube Squaring Machine is a lightweight, portable machine
designed for facing and squaring .125 to 1.050 (3.2 mm to 26.7 mm) outside
diametertubingwithanabilitytohandleupto1/8(3mm)thickwall.
Use one of the following with the Model 301SP:
• Integral, variable speed 115 VAC Electric Motor
• Integral, variable speed 220 VAC Electric Motor
• Air Motor
• Battery powered Electric Motor.
Precision inside diameter Saddles hold the tubing round to accurately square
and face the tubing with a minimum burr.
The Machine accepts its own torque through the Saddle Clamping system.
The Cutting Head accepts Squaring Tool Bits.
All required tools for operation of the Model 301SP are supplied.
Model 301SP Tube Squaring Machine
92-0579 Rev. 190612 7
TRI TOOL INC.
92-0579 Rev. 190612
8
4. SPECIFICATIONS
Figure: 1. Model 301SP Tube Squaring Machine with a Motor
Saddle
Feed Handle
Trigger
Speed Control
8.50”
(215.9 mm)
(82.6 mm)
3.25”
14.50”
(368.3 mm)
Weight with a Motor (Approx.):8.5lbs.(3.9kg)
(varies with Saddle size and type of Motor).
POWER REQUIREMENTS
Model No. P/N
301SP 110 115 VAC +/- 10%, 25 to 60 Hz
301SP 220 220 VAC +/- 10%, 25 to 60 Hz
Model 301SP-A 22 cfm at 90 psi (10 L/s at 621 kPa)
Autres manuels pour 301SP
1
Ce manuel convient aux modèles suivants
16
Table des matières
Autres manuels TRI tool Outils électriques
