TRENDnet TEW -739APBO Manuel utilisateur

TREflDnef

• N300 Outdoor PoE Access Point

TEW-739APBO

• Quick Installation Guide (1)

TEW-739AP O (V1) /01.16.2015

ESPANOL I DEUTSCH FRAN AI$ ENGLISH

1. Before You Start

Package Contents

• TEW-739AP O

• CD-ROM (User's Guide)

• Multi-Language Quick Installation Guide

• Proprietary PoE injector

• Power adapter (48 V DC, 0.5 A)

• Mounting hardware

• Waterproof RJ-45 plug (network cable is not included)

• Grounding wire

Installation Requirements

• Requires antennas: TEW-AO46S or TEW-AO57

• Computer with a network port and web browser

• A network switch or router with an available network LAN port

• RJ-45 network cables (sold separately)

• Phillips screwdriver

Note:

• The TEW-739AP O does not support IEEE 802.3at/af. You must use the proprietary Power

over Ethernet injector that is supplied with the TEW-739AP O.

Note: The default IP address of the TEW-739AP O is 192.168.10.100. To configure the

TEW-739AP O, your network adapter must have an IP address within the 192.168.10.x subnet

(e.g. 192.168.10.50). Please refer to the Appendix in the User's Guide for more information.

Phase 1: Access Point Setup

Note:

• The initial configuration should be completed in a testing environment. Configure the device

before mounting. L

l |

©iIncluded PoE injector

ESPA&OL I DEUTSCH FRAM£AiS ENGLISH

ESPANOL

1. Connect the TEW-AO46S or the TEW-AO57 antennas to the TEW-739AP O.

2. Connect one end of a network cable into the TEW-739AP O.

3. Connect the other end of the network cable to the P+DATA OUT port on the Power over

Ethernet Injector.

4. Connect one end of another network cable to the 10/100 DATA IN port on the Power over

Ethernet Injector.

5. Connect the other end of a network cable to your computer's Ethernet port.

6. Connect the power adapter into the Power over Ethernet Injector. Then connect the power

adapter into a power outlet. (For EU version, toggle the power switch to the “On" position).

7. Assign a static IP address to your computer's network adapter in the subnet of 192.168.10.x

(e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.

8. Open your web browser, type the IP address of the access point in the address bar, and then

press Enter. The default iP address is 192.168.10.100.

File Edit View Favorites Jools Help

9. Enter the User name and Password, and then click OK. y default:

User Name: admin

Password: admin

Note: Username and password are case sensitive.

Note: For first time installation, you are required to change the admin password.

10. Enter a new admin password.

11. Confirm the new password.

12. Click Save.

System is restarting,

please wait for 44

seconds

14. Click Wireless

15. Click Edit. Virtual AP.

PYCCKMM I e s p a n o l

Note: To protect your network from any unauthorized access it is recommended to enable

wireless encryption.

16. Select WPA2-PSK for security type.

17. Select AES for cipher suite.

18. Enter a Pre-shared Key (wireless password).

19. Click Save.

20. Click Reboot.

22. Wait 45 seconds while the Access Point reboots.

System is restarting,

please wait for 45

seconds

23. Configure the TEW-739AP O's IP address to a valid IP address within the subnet defined by

the Router. Avoid using an IP address within the DHCP pool of your router. In this example,

we will assume the following:

Router IP Address: 192.168.10.1

Subnet Mask: 255.255.255.0

DHCP Pool: 192.168.10.100~192.168.10.149

The TEW-739AP O will be setup with the following IP address assignment:

IP Address: 192.168.10.50

IP Netmask (Subnet Mask): 255.255.255.0

IP Gateway (Gateway IP Address): 192.168.10.1

Primary DNS: 192.168.10.1

ESPANOL

124. Click System " LAN.

25. Select Static IP.

26. Configure the IP Address, IP Netmask and IP Gateway based on the example in step 23.

27. Select Specify DNS Server IP.

28. Configure the Primary DNS based on the example in step 23.

29. Click Save.

30. Click Reboot.

ESPANOL

3. Hardware Installation

Waterproof kit installation

1. Unscrew the sealing nut from the main

body.

2. Separate the rubber seal from the claw.

3. Verify that you have the following parts:

Cable Gland, Seal, Claw, Sealing Nut

f OS

I Cable Gland Seal Claw Sealing Nut

4. Insert one end of an Ethernet cable into

the sealing nut.

5. Insert the Ethernet cable into the seal.

6. Insert the seal into the claw.

7. Insert the seal/rubber claw into the Cable

Gland.

8. Connect the Ethernet cable to the PoE port

on the rear of the access point.

9. Using your hand, screw the main body

counter clockwise to secure it to the

TEW-739AP O.

10. Using your hand, screw the seal nut

counter clockwise to secure it to the main

body.

Table des matières

Autres manuels TRENDnet Point d'accès sans fil

TRENDnet

TRENDnet TEW-821DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-753DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-410APBplus Manuel utilisateur

TRENDnet

TRENDnet TEW-750DAP Manuel utilisateur

TRENDnet

TRENDnet TEW-310APBX Manuel utilisateur

TRENDnet

TRENDnet TEW-630APB - Wireless Access Point Manuel utilisateur

TRENDnet

TRENDnet 14dBi Manuel utilisateur

TRENDnet

TRENDnet TEW-650AP Manuel utilisateur

TRENDnet

TRENDnet TEW-750DAP Manuel utilisateur

TRENDnet

TRENDnet TPL-210AP Manuel utilisateur

TRENDnet

TRENDnet TEW-230APB Manuel utilisateur

TRENDnet

TRENDnet TEW-630APB - Wireless Access Point Manuel utilisateur

TRENDnet

TRENDnet TPL-310AP Manuel utilisateur

TRENDnet

TRENDnet TEW-453APB - 108Mbps Wireless Super G HotSpot Access... Manuel utilisateur

TRENDnet

TRENDnet TEW-AP100plus Manuel utilisateur

TRENDnet

TRENDnet TEW-715APO Manuel utilisateur

TRENDnet

TRENDnet TEW-636APB Manuel utilisateur

TRENDnet

TRENDnet TEW-230APB Manuel utilisateur

TRENDnet

TRENDnet TEW-310APB Manuel utilisateur

TRENDnet

TRENDnet TEW-740APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-676APBO Manuel utilisateur

TRENDnet

TRENDnet TEW-310APB Manuel du propriétaire

TRENDnet

TRENDnet TEW-734APO Manuel utilisateur

TRENDnet

TRENDnet TPL-110AP - 125Mbps 802.11g Wireless Powerline Access... Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur